Abstract:The lithium (Li) metal battery (LMB) is a promising high-energy-density energy storage system. However, the uncontrollable dendrite formation and low Coulombic efficiency (CE) associated with the Li metal anode have largely hindered the practical application of LMBs [1]. During recent years, extensive efforts have been made to address the main problems of Li metal anode and to improve the electrochemical performance of the related LMBs, and plenty of promising results have been achieved. Among the reported approaches, the reformulation of electrolytes with different Li salts and additives has been regarded as an easy and cost-effective method. The conventional LiPF6/carbonate electrolytes have been found to be detrimental to Li metal anode especially at high charge current densities, which is mainly due to the serious corrosion of Li metal anode, the consumption of electrolyte, the continuous formation of solid electrolyte interphase, and the increase of cell impedance. The highly concentrated electrolytes of LiTFSI or LiFSI in ethers have been reported to be effective to suppress Li dendrites growth and to improve the Li CE [2]. However, the ether-based electrolytes normally are not electrochemically stable at the voltages around or above 4 V. In our previous works, we have systematically investigated the dual-salt electrolytes of LiTFSI-LiBOB in carbonate solvent mixture and their effects on the performances of Li||LiFePO4 [3], Li||LiNi0.80Co0.15Al0.05O2 [4] battery systems. It has been found that the dual-salt electrolytes are favorable to protect Li metal anode and to improve the rate capability of the LMBs. Especially, our recent work discovered that further significant improvements in fast charging capability and long-term cycling stability of the Li||LiNi0.4Mn0.4Co0.2O2 batteries can be achieved by adding an optimal additive amount of LiPF6 to the LiTFSI-LiBOB/carbonate electrolyte [5]. Nevertheless, this electrolyte still leads to relatively low Li CE, which is about 90.6%. In order to further improve the Li CE of the dual-salt/carbonate electrolyte, we systematically investigated different additives such as VC, FEC, VEC, etc. By using certain additives the Li CE in the electrolytes of LiTFSI-LiBOB dual-salt in carbonate solvents can be improved from 90.6% to 98.1%. Moreover, the electrochemical performances of the LMBs with a 4-V Li-ion cathode using the newly developed dual-salt electrolytes were studied, and enhanced battery performances have been obtained. The promising results will be reported at the meeting.

Dual-Salt Electrolytes to Effectively Reduce Impedance Rise of High-Nickel Lithium-Ion Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Dual‐Salt Electrolyte with Synergistic Effect for Lithium Metal Batteries with Prolonging Cyclic Performance

Hybrid Electrolyte with Dual‐Anion‐Aggregated Solvation Sheath for Stabilizing High‐Voltage Lithium‐Metal Batteries

High Voltage Lib Cathodes Enabled by Salt-Reinforced Liquid Electrolytes

Effects of Additives in Dual-Salt/Carbonate Electrolytes on Performances of Lithium Metal Batteries

Lithium Difluorophosphate‐Based Dual‐Salt Low Concentration Electrolytes for Lithium Metal Batteries

High-voltage ether-based electrolytes for lithium metal batteries via synergy between the solvent and additive

Optimization of Dual-Salt Electrolytes for Rechargeable Lithium Metal Batteries

Engineering the solvent-anion interactions of LiTFSI-based dual-salt electrolytes to sustain high-performance NCM622 cathodes

Ethylene Carbonate‐Free Electrolytes for Stable, Safer High‐Nickel Lithium‐Ion Batteries

Solvation Structure and Derived Interphase Tuning for High‐Voltage Ni‐Rich Lithium Metal Batteries with High Safety Using Difluorinated Ionic Liquid Based Dual‐Salt Electrolytes

Double‐Salts Super Concentrated Carbonate Electrolyte Boosting Electrochemical Performance of Ni‐Rich LiNi0.90Co0.05Mn0.05O2 Lithium Metal Batteries

Blended Salt Electrolyte Design for Enhanced NMC811||Graphite Cell Performance

Performance enhanced high-nickel lithium metal batteries through stable cathode and anode electrolyte interfaces

Synergistic Dual-Salt Electrolyte for Safe and High-Voltage LiNi0.8Co0.1Mn0.1O2//Graphite Pouch Cells

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Designing an Asymmetric Ether-Like Lithium Salt to Enable Fast-Cycling High-Energy Lithium Metal Batteries

(Invited) Fluorinated Linear Carbonate Electrolyte for Lithium-Ion Batteries with Fast-Charging, High Voltage, and Wide Operating Temperatures

Ultrathin and Non‐Flammable Dual‐Salt Polymer Electrolyte for High‐Energy‐Density Lithium‐Metal Battery