Model of Shear Strength of Ultra-Deep Fractured Sandstone Considering Fracture Morphology
Huiwen Pang,Shuai Yang,Yu Liang,Yanru Zhang,Yan Jin
DOI: https://doi.org/10.1016/j.gete.2023.100512
IF: 4.604
2023-10-18
Geomechanics for Energy and the Environment
Abstract:Ultra-Deep fractured tight sandstone gas reservoir, the hotpot unconventional petroleum resources, has been the subject of investigation recently. Due to the presence of natural fractures, drilling in ultra-deep fractured tight sandstone may cause complicated wellbore instabilities, which resulted in a substantial challenge to the efficient exploitation and production of tight gas resources. In order to understand the rock mechanical properties of the ultra-deep fractured tight sandstone under shear stress, tight sandstone core samples were artificially shear-fractured, the 3D characteristics of the fractures were reconstructed by CT scanning, and the fracture aperture and roughness characteristics were systematically evaluated. Simultaneously, triaxial shear strength tests were conducted to evaluate the mechanical properties of fractured rock subjected to varying confining pressures. Considering the contact relationship of the fracture surface during shearing, two indexes of average effective shear angle and contact area ratio were proposed to correct the fracture roughness, and a new fracture shear strength model was constructed, which served as the failure criterion for the fractured formation. The results show that the intact rock has a high compressive strength and can only collapse under conditions of substantial differential stress. Consequently, shear failure of fracture ought to be the primary source of wellbore instability. The fracture aperture's spatial distribution is irregular and conforms to a Gaussian distribution. A clear anisotropy in the fracture roughness is present, and there is less roughness along the initial shear failure path and more roughness perpendicularly. With an increase in normal stress, the fracture's peak shear strength rises, while the friction angle steadily falls. The innovative model's accuracy in predicting shear strength is higher than that of the weak-surface model and the JRC-JCS model.
energy & fuels,geosciences, multidisciplinary,engineering, geological