Abstract:In this study, a method for detecting defects in carbon fiber‐reinforced polymers (CFRPs) using a new probe to measure eddy current loss is proposed. The comparison of eddy current loss among different types of CFRPs is presented, scanning imaging results of orthogonally woven CFRP sample further demonstrate the detection performance, and the fiber orientation of CFRPs is characterized. Eddy current testing (ECT) is a widely used technique for detecting defects in carbon fiber‐reinforced polymers (CFRPs) at high frequencies. However, designing high‐frequency systems can be challenging, and high noise levels can be problematic. To address these issues, non‐destructive testing (NDT) methods that can detect CFRP defects at lower frequencies must be explored. In this study, a novel NDT method for detecting defects in CFRP at low frequencies was proposed. This method is an alternative to pulsed eddy current thermography and can achieve similar detection and imaging results at low frequencies. Furthermore, the developed method has a simpler structure and is easier to implement. This method uses the eddy current loss to characterize the thermal power of the eddy current in CFRP. A new probe was used to detect the eddy current loss to inspect the CFRP. The effectiveness of the proposed method was experimentally verified using different types of CFRP samples based on the C‐scan technology. The scanned images demonstrate that the developed method can provide appropriate detection results up to a frequency of 750 kHz. Furthermore, rotation experiments were performed to detect the fiber direction; the proposed method successfully detected the fiber direction up to 750 kHz. Thus, the proposed method can improve the detection of defects and enhance the longevity of CFRP components. Future work will focus on enhancing the sensitivity of this method at even lower frequencies.

Detection of fiber waviness in carbon fiber prepreg using Eddy current method

Directional eddy current probe configuration for in-line detection of out-of-plane wrinkles

Non-Destructive Evaluation of In-Plane Waviness in Carbon Fiber Laminates Using Eddy Current Testing

A new probe‐based electromagnetic non‐destructive testing method for carbon fiber‐reinforced polymers utilizing eddy current loss measurements

Thickness Measurement of Composite Material Using Eddy Current Testing

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

An Algorithm Based on Logarithm of Wavenumber Amplitude for Detection of Delamination in Carbon Fiber Composite

Non-destructive testing for carbon-fiber-reinforced plastic (CFRP) using a novel eddy current probe

Nondestructive Detection of In-Plane Wrinkles in Carbon Fiber Laminates Using Eddy Current and Ultrasonic Testing

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Advances in Automated Eddy-Current Characterisation of Carbon Fibre Composites

Non-Destructive Testing of Carbon Fiber-Reinforced Plastics (CFRPs) Using a Resonant Eddy Current Sensor

A Smart Eddy Current Sensor Dedicated to the Nondestructive Evaluation of Carbon Fibers Reinforced Polymers

Noncontact Visualization of Multiscale Defects in CFRP Composites using Eddy Current Testing with T-R Probe

Eddy current non-destructive evaluation of manufacturing flaws and operational damage in CFRP composites

Normalization and processing of rotational eddy current scans for layup characterization of CFRP laminates

Development of Multi-Coils Circular Eddy Current Sensor for Characterization of Fibers Orientation and Defect Detection in Multidirectional CFRP Material

Study of Damage Prediction of Carbon Fiber Tows Using Eddy Current Measurement

Development and Application of Eddy Current Sensor Arrays for Process Integrated Inspection of Carbon Fibre Preforms

Reconstruction of Cracks in a Carbon Fiber-Reinforced Polymer Laminate Plate from Signals of Eddy Current Testing

Nondestructive Evaluation of Nylon/carbon-Fiber Additively Manufactured Components Using Rotational Eddy Current Testing