Abstract:Abstract All solid-state rechargeable lithium metal batteries (SS-LMBs) are gaining more and more importance because of their higher safety and higher energy densities in comparison to their liquid-based counterparts. In spite of this potential, their low discharge capacities and poor rate performances limit them to be used as state-of-the-art SS-LMBs. This arise due to the low intrinsic ionic and electronic transport pathways within the solid components in the cathode during the fast charge/discharge processes. Therefore, it is necessary to have a cathode with good electron conducting channels to increase the active material utilization without blocking the movement of lithium ions. Since SS-LMBs require a different morphology and composition of the cathode, we selected LiFePO 4 (LFP) as a prototype and, we have systematically studied the influence of the cathode composition by varying the contents of active material LFP, conductive additives (super C65 conductive carbon black and conductive graphite), ion conducting components (PEO and LiTFSI) in order to elucidate the best ion as well as electron conduction morphology in the cathode. In addition, a comparative study on different cathode slurry preparation methods was made, wherein ball milling was found to reduce the particle size and increase the homogeneity of LFP which further aids fast Li ion transport throughout the electrode. The SEM analysis of the resulting calendered electrode shows the formation of non-porous and crack-free structures with the presence of conductive graphite throughout the electrode. As a result, the optimum LFP cathode composition with solid polymer nanocomposite electrolyte (SPNE) delivered higher initial discharge capacities of 114 mAh g -1 at 0.2C rate at 30 °C and 141 mAh g -1 at 1C rate at 70 °C. When the current rate was increased to 2C, the electrode still delivered high discharge capacity of 82 mAh g -1 even after 500 cycle, which indicates that the optimum cathode formulation is one of the important parameters in building high rate and long cycle performing SS-LMBs.

Thermally assisted conversion of biowaste into environment-friendly energy storage materials for lithium-ion batteries

A lithiophilic MnO@biomass-derived carbon nanofiber host for stable lithium-metal batteries

A Method of Efficiently Regenerating Waste LiFePO4 Cathode Material after Air Firing Treatment

Composite Polymer Electrolyte Incorporating Metal-Organic Framework Nanosheets with Improved Electrochemical Stability for All-Solid-State Li Metal Batteries

Facile preparation of bio-waste-derived porous carbon for high-performance electrode material for energy storage applications: Li-ion capacitor and Li-ion batteries

A Nitrogen-Doped Carbon Skeleton Derived from Biomass As Conductive Agent for Electrochemically Stable Cathode of All-Solid-state Lithium-Sulfur Batteries

A Simple Pyrolysis of Bio-Wastes to Prepare N, and P Co-Doped Porous Carbon for Lithium-Sulfur Batteries

Cathode Structural Design Enabling Interconnected Ionic/electronic Transport Channels for High-Performance Solid-State Lithium Batteries

Construction of multiwall carbon nanotubes/biomass-derived nitrogen-doped carbon@regenerated LiFePO4 cathode materials for lithium-ion batteries

Construction and preparation of nitrogen-doped porous carbon material based on waste biomass for lithium-ion batteries

Tuning of composition and morphology of LiFePO4 cathode for applications in all solid-state lithium metal batteries

High performance of regenerated LiFePO4 from spent cathodes via an in situ coating and heteroatom-doping strategy using amino acids

Preparation of Fepo4 from Leaching Liquor of Fe-P Waste Slag and Its Application in Lithium Ions Batteries

Facile Interfacial Modification Via In-Situ Ultraviolet Solidified Gel Polymer Electrolyte for High-Performance Solid-State Lithium Ion Batteries

Stabilizing Conversion Reaction Electrodes by MOF Derived N-doped Carbon Shell for Highly Reversible Lithium Storage

Sustainable and facile synthesis of high-performance nitrogen-doped carbon/graphene@LiFePO4 cathode materials from spent LiFePO4

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Based on N, F, and P co-doping biomass carbon to construct 3D porous carbon coated LiFePO4 for preparing lithium-ion batteries

Closed-loop selective recycling process of spent LiNi Co Mn O2 batteries by thermal-driven conversion

From waste to energy storage: calcinating and carbonizing chicken eggshells into electrode materials for supercapacitors and lithium-ion batteries