Polynucleotides: Base Behaviour

O. Correspondent

DOI: https://doi.org/10.1038/234128a0

IF: 64.8

Nature

Abstract:

What problem does this paper attempt to address?

Breakthrough analysis of the CO2/CH4 separation on electrospun carbon nanofibers

Victor Selmert,Ansgar Kretzschmar,Hans Kungl,Hermann Tempel,Rüdiger-A. Eichel

DOI: https://doi.org/10.1007/s10450-023-00435-6

2024-02-06

Adsorption

Abstract:The removal of the main impurity CO 2 is a crucial step in biogas upgrading. In this work, the separation of CO 2 from CH 4 on electrospun polyacrylonitrile-based carbon nanofibers (CNFs) is investigated using breakthrough experiments. The CNFs are prepared at various carbonization temperatures ranging from 600 to 900 °C and feature a tailorable pore size that decreases at higher carbonization temperatures. The adsorption properties of the different CNFs are studied measuring pure component isotherms as well as column breakthrough experiments. Adsorption kinetics are discussed using a linear driving force approach to model the breakthrough experiment and obtain the adsorption rate constant. Moreover, different approaches to determine the selectivity of the competitive CO 2 /CH 4 adsorption are applied and discussed in detail. The results clearly prove that a size exclusion effect governs the adsorption selectivity on the CNFs. While CH 4 cannot adsorb in the pores of CNFs prepared at 800 °C or above, the smaller CO 2 is only excluded from the pores of CNFs prepared at 900 °C. For CNFs carbonized in the range from 600 to 750 °C, values of the CO 2 /CH 4 selectivity of 11–14 are obtained. On the CNFs prepared at 800 °C the CH 4 adsorption is severely hindered, leading to a reduced adsorbed amount of CH 4 and consequently to an improved CO 2 /CH 4 selectivity of 40. Furthermore, owing to the shrinking pores, the adsorption rates of CH 4 and CO 2 decrease with higher carbonization temperature.

engineering, chemical,chemistry, physical
Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

Yu-Chun Chiang,Chih-Cheng Huang,Wei-Ting Chin

DOI: https://doi.org/10.3390/app11167724

2021-08-22

Applied Sciences

Abstract:Electrospinning techniques have become an efficient way to produce continuous and porous carbon nanofibers. In view of CO2 capture as one of the important works for alleviating global warming, this study intended to synthesize polyacrylonitrile (PAN)-based activated carbon nanofibers (ACNFs) using electrospinning processes for CO2 capture. Different structures of PAN-based ACNFs were prepared, including solid, hollow, and porous nanofibers, where poly(methyl methacrylate) (PMMA) was selected as the sacrificing core or pore generator. The results showed that the PMMA could be removed successfully at a carbonization temperature of 900 °C, forming the hollow or porous ACNFs. The diameters of the ACNFs ranged from 500 to 900 nm, and the shell thickness of the hollow ACNFs was approximately 70–110 nm. The solid ACNFs and hollow ACNFs were microporous materials, while the porous ACNFs were characterized by hierarchical pore structures. The hollow ACNFs and porous ACNFs possessed higher specific surface areas than that of the solid ACNFs, while the solid ACNFs exhibited the highest microporosity (94%). The CO2 adsorption capacity on the ACNFs was highly dependent on the ratio of V<0.7 nm to Vt, the ratio of Vmi to Vt, and the N-containing functional groups. The CO2 adsorption breakthrough curves could be curve-fitted well with the Yoon and Nelson model. Furthermore, the 10 cyclic tests demonstrated that the ACNFs are promising adsorbents.
Preparation of Zeolitic Imidazolate Framework-8-Based Nanofiber Composites for Carbon Dioxide Adsorption

Yu-Chun Chiang,Wei-Ting Chin

DOI: https://doi.org/10.3390/nano12091492

IF: 5.3

2022-04-28

Nanomaterials

Abstract:In this study, polyacrylonitrile (PAN)-based activated nanofiber composites, which were embedded inside zeolitic imidazolate framework-8 (ZIF-8) crystals or ZIF-8-derived carbons (ZDC-850), were fabricated using an electrospinning process, to serve as CO2 adsorbents. The adsorbents were characterized using various techniques. The degree of crystallinity of ZDC-850 totally changed compared to that of ZIF-8. For nanofiber composites, the timing of the ligand decomposition of ZIF-8 significantly affected the material properties. The Zn metals in the ZIF-8/PAN or ZDC-850/PAN could be embedded and protected by the PAN fibers from excess volatilization in the following treatments: ZIF-8 had significant pore volumes in the range of 0.9–1.3 nm, but ZDC-850 and ZIF-8/PAN exhibited a distinct peak at approximately 0.5 nm. The CO2 adsorption capacities at 25 °C and 1 atm followed the order: ZIF-8/PAN (4.20 mmol/g) > ZDC-850 (3.50 mmol/g) > ZDC-850/PAN (3.38 mmol/g) > PAN (2.91 mmol/g) > ZIF-8 (0.88 mmol/g). The slope in the log–linear plot of isosteric heat of adsorption was highly associated with CO2 adsorption performance. Under 1 atm at 25 °C, for Zn metal active sites inside the pores, the pores at approximately 0.5 nm and in C-N (amines) groups could promote CO2 adsorption. At low CO2 pressures, for a good CO2 adsorbent, the carbon content in the adsorbent should be higher than a threshold value. Under this condition, the percentage of ultra-micropore and micropore volumes, as well as the functional groups, such as the quaternary or protonated N (amines), N=C (imines or pyridine-type N), C-OH, and -COOH groups, should be considered as significant factors for CO2 adsorption.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Microstructure effect of carbon materials on the low-concentration methane adsorption separation from its mixture with nitrogen

Donglei Qu,Ying Yang,Kai Lu,Lin Yang,Ping Li,Jianguo Yu,Ana Mafalda Ribeiro,Alirio E. Rodrigues

DOI: https://doi.org/10.1007/s10450-018-9951-4

2018-04-23

Adsorption

Abstract:Due to the weak polarities of CH4 and N2 and their similar physicochemical properties, the microporous adsorbents have a little amount of adsorption capacity for the low-concentration methane, and the separation of CH4/N2 is also very difficult to accomplish by the adsorption-based process. Microstructure of carbon materials plays a decisive role for CH4/N2 effective separation and CH4 enrichment from the low-concentration methane gas mixed with nitrogen. This work focuses on the research of carbon material microstructure, including the selection of raw material or precursor for the carbon skeleton formation, effect of the specific surface area of carbon material on the low-concentration methane adsorption amount, the relationship between micropore size distribution of carbon material and CH4/N2 adsorption separation mechanism, and effect of different activator on the weak polar methane adsorption capacity. According to the microstructure analysis, the granular activated carbons (GACs) are prepared in lab-scale with the optimal preparation conditions, raw coconut shell carbonization for 2 h at 1073 K under N2 atmosphere and KOH activation for 1 h at 1073 K under N2 atmosphere with the KOH to carbonized material ratio of 3:1. And then, the home-made GACs (about 200 g) were packed in a column. A four-step one-bed vacuum pressure swing adsorption (VPSA) process was adopted to evaluate the low-concentration methane adsorption separation performance from its mixture with nitrogen.

English Else
Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Yao Li,Ran Xu,Binbin Wang,Jianping Wei,Lanyun Wang,Mengqi Shen,Juan Yang

DOI: https://doi.org/10.3390/nano9020266

IF: 5.3

2019-02-15

Nanomaterials

Abstract:Separation of impurities (CO2 and N2) from CH4 is an important issue for natural gas alternatives (such as coalbed gas, biogas, and landfill gas) upgrading. It is notably challenging to synthesize high N-doped porous carbon with an appropriate porous structure. In this work, high N content (14.48 wt %) porous carbon with micropore size of 0.52 and 1.2 nm and specific surface area of 862 m2 g−1 has been synthesized from potassium hydroxide (KOH) activated waste wool upon the urea modification. Pure component adsorption isotherms of CO2, CH4, and N2 are systematically measured on this enhanced N-doped porous carbon at 0 and 25 °C, up to 1 bar, to evaluate the gases adsorption capability, and correlated with the Langmuir model. These data are used to estimate the separation selectivities for binary mixtures of CO2/CH4 and CH4/N2 at different mixing ratios according to the ideal adsorbed solution theory (IAST) model. At an ambient condition of 25 °C and 1 bar, the predicted selectivities for equimolar CO2/CH4 and CH4/N2 are 3.19 and 7.62, respectively, and the adsorption capacities for CO2, CH4, and N2 are 2.91, 1.01, and 0.13 mmol g−1, respectively. This report introduces a simple pathway to obtain enhanced N-doped porous carbon with large adsorption capacities for gas separation of CO2/CH4 and CH4/N2.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Adsorption of Carbon Dioxide with Ni-MOF-74 and MWCNT Incorporated Poly Acrylonitrile Nanofibers

Amir Hossein Harandizadeh,Seyedfoad Aghamiri,Mohammad Hojjat,Marziyeh Ranjbar-Mohammadi,Mohammad Reza Talaie

DOI: https://doi.org/10.3390/nano12030412

IF: 5.3

2022-01-27

Nanomaterials

Abstract:Among the new adsorbent forms, nanofiber structures have attracted extra attention because of features such as high surface area, controllable properties, and fast kinetics. The objective of this study is to produce the polyacrylonitrile (PAN) electrospun nanofibers loaded with Ni-MOF-74/MWCNT to obtain maximum CO2 adsorption. The prepared PAN/MWCNT/MOF nanofiber based on the Box–Behnken design (BBD) model suggests the CO2 adsorption of about 1.68 mmol/g (at 25 °C and 7 bar) includes 14.61 w/v%, 1.43 w/w%, and 11.9 w/w% for PAN, MWCNT, and MOF, respectively. The results showed the effective CO2 adsorption of about 1.65 ± 0.03 mmol/g (BET = 65 m2/g, pore volume = 0.08 cm3/g), which proves the logical outcomes of the chosen model. The prepared PAN/MWCNT/MOF nanofiber was characterized using different analyzes such as SEM, TEM, TG, XRD, FTIR, and N2 adsorption–desorption isotherms. More MOF mass loading on the nanofiber surface via secondary growth method resulted in 2.83 mmol/g (BET = 353 m2/g, pore volume = 0.22 cm3/g, 43% MOF mass loading) and 4.35 mmol/g (BET = 493 m2/g, pore volume = 0.27 cm3/g, 65% MOF mass loading) CO2 adsorption at 7 bar for the first and second growth cycles, respectively. This indicates that secondary growth is more effective in the MOF loading amount and, consequently, adsorption capacity compared to the MOF loading during electrospinning.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Interplay Between Oxygen Doping And Ultra-Microporosity Improves The Co2/N-2 Separation Performance Of Carbons Derived From Aromatic Polycarboxylates

Andrew R. Barron

DOI: https://doi.org/10.1016/j.carbon.2020.11.080

IF: 10.9

2021-01-01

Carbon

Abstract:Microporous carbons were prepared starting from a series of benzene polycarboxylic acids following two strategies: (i) activation- and template-free pyrolysis and (ii) ion-exchange pyrolysis. The proposed synthetic strategies are facile approaches to produce highly microporous carbons that avoid the use of large amounts of corrosive and expensive chemical activators or templates. By varying the number of carboxylic acid groups, the charge balancing species and the degree of deprotonation of the precursors, microporous carbons with diverse morphologies, textural properties and oxygen contents were obtained and their CO2 and N-2 sorption properties were assessed. The abundant micropores made the materials suitable for CO2 adsorption at low pressure and ambient temperature, achieving CO2 uptake as high as 4.4 mmol g(-1) at 25 degrees C and 1 bar, competitive with those reported for porous carbons produced using large excess of alkali metal based activating agents. It was found that high performance, in terms of CO2 uptake and CO2/N-2 selectivity, was linked to the simultaneous presence of large ultra-micropore volume and high oxygen content in the sorbents. This suggests that the interplay of ultra-microporosity and oxygen doping matters more than the two features taken singularly in determining the CO2/N-2 separation properties of porous carbons at low pressure. (C) 2020 Elsevier Ltd. All rights reserved.
Effect of carbon nanofibers fabricated from electrospun PAN precursors on the characteristics and Densification of MgO–CaO Ceramic systems

Aziz Shahraki,Adrine Malek Khachatourian,Ali Nemati

DOI: https://doi.org/10.1016/j.jeurceramsoc.2024.116698

IF: 5.7

2024-06-26

Journal of the European Ceramic Society

Abstract:MgO–CaO composites are basic materials with high melting points, high chemical resistance to alkaline environments, clean steel production, environmental friendliness, and abundant sources. In the current work, carbon nanofibers (CNFs) with diameters between 150 to 270 nm were prepared at different temperatures (up to 1200 °C) by carbonization of electrospun polyacrylonitrile (PAN) precursors. Then, the MgO–CaO composites were prepared in two steps. First, 3 wt% CNFs carbonized at different temperatures were added to the composite to determine the optimal carbonization temperature. Subsequently, the physical properties (apparent porosity and bulk density) and mechanical properties (flexural strength (FS) and cold crushing strength (CCS)) of the MgO–CaO-CNF composites were investigated. X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), Energy-Dispersive X-ray spectroscopy (EDS), and thermogravimetric analysis (TGA) were used to analyze the composition, morphology, and structure of the CNFs powders and composite samples. Based on the results obtained, such as the percentage graphitization, length, average diameter, and morphology of the CNFs, 1000 °C was determined as the appropriate carbonization temperature for the next steps of this study. In a second step, the CNFs synthesized at 1000 °C were added to the MgO–CaO with different wt% (0, 0.5, 1, 1.5, 2, 2.5, and 3 wt%). It was found that by adding CNFs (up to 1.5 wt%) into the MgO-CaO composites, the physical properties increased due to the improvement of densification, and mechanical properties improved due to the activation of reinforcing mechanisms, the reduction of surface defects and the creation of a dense body. However, these properties decreased from 1.5 to 3 wt% due to the agglomeration and poor dispersion of the CNFs. Finally, the results illustrated that adding CNFs, even in small amounts, significantly improved the features of MgO-CaO compounds; the ideal content was 1.5 wt% CNFs.

materials science, ceramics
Optimal Performance of Nanoporous Carbons on Adsorptive Separation of CO 2 from Flue Gas

Zhizhong Lin,Lang Liu,Chao Liu,Yang Liu

DOI: https://doi.org/10.1021/acs.energyfuels.1c00086

2021-04-15

Abstract:We adopted grand canonical Monte Carlo (GCMC) simulations to comprehensively investigate the adsorption of CO2/N2 mixtures of different compositions in well-shaped single-walled carbon nanotubes (CNTs), stratified activated carbon fiber (ACF-15), and completely disordered silicon carbide-derived carbon (SiC-DC) at different temperatures. It was found that reducing the pore size initially enhances the adsorption and selectivity of CO2 for enhanced adsorbate–adsorbent interactions, which, however, eventually reduces the selectivity for the enhanced entropic effect. It was also revealed that formation of a cylindrical pore could dramatically enhance the potential field, emphasizing that the morphology of the carbons could have a significant impact on the adsorptive separation performance. While increasing the temperature reduces the separation performance, the enhanced mole fraction of CO2 after multistage separation facilitates the subsequent flue gas separation procedure. A performance coefficient was adopted to comprehensively measure the separation performance of nanoporous carbons on the separation of CO2 from CO2/N2 mixtures with varying compositions and at different temperatures. Among the CNTs considered, either the (6, 6) or the (7, 7) CNT achieves the best separation performance for specific working conditions, associated with the performance coefficient being around 1 order of magnitude higher than the counterparts of ACF-15 and SiC-DC.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00086?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00086</a>.Additional supporting atomistic configurations of the carbon structures and the orientation angle distribution of CO2 in the carbon of different structures, and variation of the adsorption of CO2 and N2 with radius of curvature in convex curved carbons (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00086/suppl_file/ef1c00086_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

energy & fuels,engineering, chemical
Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons

En-Jie Wang,Zhu-Yin Sui,Ya-Nan Sun,Zhuang Ma,Bao-Hang Han

DOI: https://doi.org/10.1021/acs.langmuir.7b04370

IF: 3.9

2018-06-05

Langmuir

Abstract:In this work, a series of highly porous sulfur-doped carbons are prepared through physical activation methods by using polythiophene as a precursor. The morphology, structure, and physicochemical properties are revealed by a variety of characterization methods, such as scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and nitrogen sorption measurement. Their porosity parameters and chemical compositions can be well-tuned by changing the activating agents (steam and carbon dioxide) and reaction temperature. These sulfur-doped porous carbons possess specific surface area of 670-2210 m2 g-1, total pore volume of 0.31-1.26 cm3 g-1, and sulfur content of 0.6-4.9 atom %. The effect of porosity parameters and surface chemistry on carbon dioxide adsorption in sulfur-doped porous carbons is studied in detail. After a careful analysis of carbon dioxide uptake at different temperatures (273 and 293 K), pore volumes from small pore size (less than 1 nm) play an important role in carbon dioxide adsorption at 273 K, whereas surface chemistry is the key factor at a higher adsorption temperature or lower relative pressure. Furthermore, sulfur-doped porous carbons also possess good gas adsorption selectivity and excellent recyclability for regeneration.
A comprehensive study on the effect of carbonization temperature on the physical and chemical properties of carbon fibers

Roya Shokrani Havigh,Hossein Mahmoudi Chenari

DOI: https://doi.org/10.1038/s41598-022-15085-x

IF: 4.6

2022-06-24

Scientific Reports

Abstract:Carbon fibers were successfully fabricated via the electrospinning technique, followed by stabilizing and carbonizing electrospun PAN fibers. A wide range of analytical techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), vibrating sample magnetometer (VSM) techniques, and Hall effect were performed to study of the effect of carbonization temperature on the physical and chemical characterization of carbon fibers. The SEM images of the PAN precursor exhibit a smooth outer surface, after the stabilization and carbonization process, along with a broken fiber at higher carbonization temperature about 1400 °C. Morphological characterization based on the recorded TEM images of carbonized fibers at 1000 °C and 1400 °C, showed that the obtained morphology can be classified as fiber structures, where their diameters ranged from 196 to 331 nm. The XRD patterns of PAN-based carbon fibers confirm the structural changes from linear structure into a graphite-like structure. The DRS study indicates the possible π– π */ σ–π * and n–π* transitions. The presence of the surface functional groups and different trapped radiative recombination on the emission bands is confirmed by the PL. VSM results shows the weak ferromagnetic nature of the carbon fibers.

multidisciplinary sciences
Preparing PAN/MOF nanofiber composite by electrospinning method for carbon dioxide adsorption

Mohammad Shabani Nashtaei,Afsaneh Mollahosseini,Mahboubeh Rabbani,Payam Shabannashtaei,Sina Parvaz

DOI: https://doi.org/10.1016/j.inoche.2023.110731

2023-05-06

Inorganic Chemistry Communication

Abstract:The purpose of this work is to provide an efficient adsorbent in its stabilized form. In the present study, MOF particles were synthesized using solvothermal method and identified by FTIR and XRD devices. After stabilization in the form of a PAN based electrospun fiber, studying morphology, distribution of the particles and its map on SEM images, thermal resistance in TGA analysis, measurement of the surface area by BET device and carbon dioxide adsorption with a new method at constant pressure were investigated. Various conditions such as gas content, removal time, the adsorbent mass and mixing extent were optimized by recording the initial and final adsorbate values in gas chromatography with thermal detector (under optimal conditions the adsorption rate is reported to be up to 58%). The isotherm data shows the most agreement with the Freundlich isotherm with K F equal to 1.32 unit. Moreover, the adsorption process kinetics were examined which the results indicate compliance with the pseudo-second-order model.
Enhancing CO 2 adsorption performance of porous nitrogen-doped carbon materials derived from ZIFs: Insights into pore structure and surface chemistry

Yifei Wang,Yange Suo,Yousheng Xu,Zhiguo Zhang

DOI: https://doi.org/10.1016/j.seppur.2023.126117

IF: 8.6

2023-12-25

Separation and Purification Technology

Abstract:In this work, a novel approach for the synthesis of porous nitrogen-doped carbon materials (PNCs) with a highly microporous structure through low-temperature carbonization of ZIF-8 and ZIF-61 assisted by KCl and NaCl is reported. The introduction of KCl and NaCl during the carbonization process can adjust the surface chemical properties and pore structures of the PNCs derived from ZIF-8 and ZIF-61. The effects of pore structures and surface groups of PNCs on CO 2 adsorption capacity are explored. Results show that the cumulative pore volume in the pore size range of 5–7 Å (V 5-7 Å ), pyrrolic-N content, and COOH content exert favorable influences on CO 2 adsorption capacity at 1 bar and 25 °C. Notably, V 5-7 Å is the key factor in enhancing the CO 2 adsorption capacity of PNCs. Moreover, the degree of contribution of V 5-7 Å , V 7-9 Å , pyrrolic-N content, pyridinic-N content, and COOH content to the CO 2 adsorption capacity is evaluated by establishing a multiple linear regression equation, and the results show that on the basis of PNCs possessing optimum pore structures (V 5-7 Å > 0.10 cm 3 /g), pyrrolic-N content in PNCs becoming the dominant contributor to CO 2 adsorption capacity. The as-prepared 2CN8-KCl-600 sample demonstrates high CO 2 adsorption capacity, which reaches 4.61 mmol/g at 25 °C and 6.70 mmol/g at 0 °C (1 bar), respectively. Besides, 2CN8-KCl-600 exhibits high CO 2 /N 2 selectivity (39.5) under the typical flue gas scenario and high cycling stability. This work offers a novel perspective on preparing highly efficient carbon-based adsorbents for CO 2 and provides the fundamental understanding for enhanced CO 2 adsorption performance on PNCs.

engineering, chemical
Preparation and characterization of novel carbon molecular sieve membrane/PSSF composite by pyrolysis method for toluene adsorption

Ying Yan,Peng Huang,Huiping Zhang

DOI: https://doi.org/10.1007/s11705-019-1827-y

IF: 4.803

2019-10-08

Frontiers of Chemical Science and Engineering

Abstract:Carbon molecular sieve membrane (CMSM)/paper-like stainless steel fibers (PSSF) has been manufactured by pyrolyzing poly (furfuryl alcohol) (PFA) coated on the metal fibers. PFAwas synthesized using oxalic acid dihydrate as a catalyst and coated on microfibers by dip coating method. For the purpose of investigating the effects of final carbonization temperature, the composites were carbonized between 400°C and 800°C under flowing nitrogen. The morphology and microstructure were examined by X-ray diffraction, Fourier transforms infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, N2 adsorption and desorption, Raman spectra and X-ray photoelectron spectra. The consequences of characterization showed that the CMSM containing mesopores of 3.9 nm were manufactured. The specific surface area of the CMSM/PSSF fabricated in different pyrolysis temperature varies from 26.5 to 169.1 m2·g-1 and pore volume varies from 0.06 to 0.23 cm3·g-1. When pyrolysis temperature exceeds 600°C, the specific surface, pore diameter and pore volume decreased as carbonization temperature increased. Besides, the degree of graphitization in carbon matrix increased with rising pyrolysis temperature. Toluene adsorption experiments on different structured fixed bed that was padded by CMSM/PSSF and granular activated carbon (GAC) were conducted. For the sake of comparison, adsorption test was also performed on fixed bed packed with GAC. The experimental results indicated that the rate constant κ' was dramatically increased as the proportion of CMCM/PSSF composites increased on the basis of Yoon-Nelson model, which suggested that structured fixed bed padded with CMSM/PSSF composite offered higher adsorption rate and mass transfer efficiency. 

engineering, chemical
Tuning N-doping thermal-process enables biomass-carbon surface modification for potential separation effect of CO2/CH4/N2

Wenhao Li,Wenlong Tu,Jie Cheng,Fu Yang,Xuyu Wang,Lulu Li,Danhong Shang,Xinwei Zhou,Chao Yu,Aihua Yuan,Jianming Pan

DOI: https://doi.org/10.1016/j.seppur.2021.120001

IF: 8.6

2022-02-01

Separation and Purification Technology

Abstract:Gas-adsorption-Sieving especially for CO2/CH4/N2 became attractive in flue-gas separation, natural-gas energy upgrading, and gas-layer-methane recovery. Herein, a detailed study on the potential adsorption separation effect of CO2/CH4/N2 using two kinds of synthesized temperature-tuning N-doping biomass activated carbon (BCx and GCx) derived from banana peel and grapefruit peel was explored. A comprehensive comparison of the structural properties and surface character of N-doping carbon was conducted through various characterizations, revealing that two N-doping AC both afford a better doping effect and higher post-implanted surface skeleton N species at 600 °C. Impressively, CO2 adsorption capacity of optimal GC600 and BC600 at 0 °C/25 °C and 1 bar reaches 5.09/3.05 mmol g−1 and 3.04/3.57 mmol g−1, respectively, which have exceeded most reported AC adsorbents. Especially, BC600 affords appreciable N and O component proportion, which renders better surface affinity for CO2 adsorption at 25 °C. While GC600 endows better CO2 adsorption at 0 °C by right of the highest occupation fraction of pore-volume-selected corresponding to specific pore-size of 1.2 nm and post-implanted beneficial surface N species. The tentative linear fitting among CO2 adsorption performance with surface N species state and structural properties validates their comprehensive influence on CO2 adsorption. Through the rational correlation of the adsorption of pure components, the adsorption selectivity to the binary mixture of CO2/N2(15/85), CO2/CH4(10/90), and CH4/N2(30/70) is predicted for optimized GC600 and BC600 through Ideal Adsorbed Solution Theory(IAST), which reaches 22.84/3.46/5.84 and 17.45/3.66/3.98, respectively and reveals obvious improvements compared to original biomass-carbon and traditional AC adsorbents. Most importantly, the optimal adsorbent afford extremely low-level adsorption heat for CO2, thereby rendering the good reversibility and reusability during 7 cycles at room temperature without any extra thermal process.

engineering, chemical
Chemical Structure Evolution and Mechanism During Pre-Carbonization of PAN-based Stabilized Fiber in the Temperature Range of 350–600 °C

Min Jing,Cheng-Guo Wang,Qiang Wang,Yu-Jun Bai,Bo Zhu

DOI: https://doi.org/10.1016/j.polymdegradstab.2007.05.020

IF: 5.204

2007-01-01

Polymer Degradation and Stability

Abstract:A series of PAN-based pre-carbonized fibers were prepared in pilot carbonization line at gradient temperature of 350–600°C. DSC, FTIR, X-ray diffraction, EPR and elemental analysis were used to study the evolution of chemical structures in these pre-carbonized fibers. At the same time, the reaction mechanism during the pre-carbonization was also explored. According to the chemical structural changes, the process of pre-carbonization below 600°C can be divided into three stages. Below 450°C, cross-linking and aromatization are the main reactions accompanied by heat liberation and rearrangement of oxygen-containing groups. But around 500°C the pyrolysis reactions acquire the priority and the aromatization structure is dominant in the fibers. Until 600°C the ladder polymers cross-link to form the carbon basal planes, resulting in the growth of aromatization structures. Based on the dependence of fiber structure on temperature, the pre-carbonization technology was optimized.
A multidegree‐of‐freedom manipulator for curtain‐wall installation

Chang-Soo Han,S. Y. Lee,K. Lee,Bum-Seok Park

DOI: https://doi.org/10.1002/rob.20122

2006-05-01

Abstract:Recently, the trend in architectural forms has been towards larger and taller buildings. Building materials are, therefore, also becoming larger and heavier. Typical construction machineries are not adequate for handling such materials, and most construction works are still managed by a human operator. Construction processes are, therefore, fraught with a number of problems, including frequent accidents, high construction cost, and heterogeneous construction quality depending on the experience of the workers. Automation has been introduced at various sites to address these construction problems. In this paper, the process of a curtain‐wall installation in a skyscraper is analyzed, and the prototype of a construction robot for curtain‐wall installation (CRCWI) is proposed. Use of the proposed CRCWI can reduce the need for manpower and the construction period and cost, and can assure safety in the curtain‐wall construction site. The performance of the proposed CRCWI was verified with a real application test in a skyscraper construction site. © 2006 Wiley Periodicals, Inc.
Lower oesophageal reflux during priming with vecuronium.

C. Martin,J. Guillen,B. Dupin,J. Ragni,P. Aknin,F. Gouin

DOI: https://doi.org/10.1093/BJA/64.1.33

IF: 11.719

British Journal of Anaesthesia

Abstract:We have studied the effects of vecuronium given in divided doses (priming principle) on the frequency of acid reflux into the oesophagus. Two groups of 16 patients were studied. After induction with thiopentone 6 mg kg-1 and fentanyl 3 micrograms kg-1, patients in one group were given vecuronium 0.01 mg kg-1 as a priming dose, followed by an intubation dose of 0.1 mg kg-1 4 min later. Patients in the other group were given no priming dose. Lower oesophageal pH was monitored continuously and acid reflux was defined as a decrease in pH to less than 4.0. One patient in each group had acid reflux during the time course of the induction. This study suggests that vecuronium 0.01 mg kg-1 given as a priming dose does not increase the risk of acid reflux into the oesophagus.
Tailoring microstructures of carbon fiber reinforced carbon aerogel-like matrix composites by carbonization to modulate their mechanical properties and thermal conductivities

Jian Ma,Jian Li,Penglei Guo,Shengyang Pang,Chenglong Hu,Rida Zhao,Sufang Tang,Hui-Ming Cheng

DOI: https://doi.org/10.1016/j.carbon.2022.05.059

IF: 10.9

2022-08-30

Carbon

Abstract:The microstructure evolution of carbon fiber reinforced carbon aerogel-like matrix (C/CA) composites with carbonization temperature and its influence on their properties were investigated. The removal of residual organo-functional groups of the C/CA precursors is dominant when carbonized at 600–750 °C with a large volume shrinkage difference by 17–22% as compared to that at 1200 °C, while the rearrangement of novolac structures is dominant at 900–1200 °C with a slight volume shrinkage fluctuation of 6%. Resultantly, the amount of micropore first increases and then decreases, while the particle size experiences an opposite change. The microstructure correspondingly transforms from a completely amorphous state to a partially amorphous state with graphite crystallites in low-angle misorientation, and then with graphite-like entangling ribbons. Due to the reduced residual tensile stress and increased interfacial bonding, the resulting composites with a variable bulk density of 0.58–0.64 g cm−3 have much higher compressive strengths of 45.8–96.9 MPa than other reported carbon foams or aerogels with similar bulk densities. The increase of strength and modulus with carbonization temperature is mainly due to the smaller tensile stress, higher particle packing compactness, larger microcrystallite size and less residual organo-functional groups. The composites also present a relatively low thermal conductivity of 0.12–0.59 W m−1 K−1. The increase of thermal conductivity with temperature is related to the synergistic effect of reduced phonon scattering associated with smaller specific surface area, larger microcrystallite size and less organo-functional groups and improved phonon transfer associated with increased inter-particle contact area.

materials science, multidisciplinary,chemistry, physical
Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas

Fuqiang Chen,Zhiguo Zhang,Qiwei Yang,Yiwen Yang,Zongbi Bao,Qilong Ren

DOI: https://doi.org/10.1021/acssuschemeng.9b05627

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Separation of methane and nitrogen is an essential matter of concern in upgrading low-quality natural gases such as biogas, coalbed methane, shale gas, and so forth. However, similar weak polarities and the close kinetic diameter of methane and nitrogen make the separation of these two species very challenging. Considering that micropores play an extremely important role in adsorption selectivity, in this work, carbon adsorbents with homogeneous pore widths were controllably prepared from poly(vinylidene chloride) resins by activating reagent-free pyrolysis. Compared to traditional activated carbon prepared by pyrolysis with the presence of chemical reagents such as potassium hydroxide and zinc chloride, the obtained microporous carbon adsorbents are free of mesopores and macropores and demonstrate efficient separation of CH4 and N-2. These materials were comprehensively characterized by PXRD, SEM, TEM, TGA, XPS, Raman spectra, contact angle measurement, and water vapor adsorption. The synthesized carbon adsorbents have an ultrahigh specific surface area (>1100 m(2)) and a large micropore volume (>0.37 cm(3)/g). Adsorption performances of these materials were demonstrated by static adsorption tests and breakthrough experiments. The methane uptake up to 1.57 mmol/g at ambient conditions outperforms most top-performing adsorbents reported to date. Moreover, the optimal microporous carbon, denoted C-PVDC-700, exhibits the highest LAST selectivity (5.5-14.7 at 298 K) of methane over nitrogen. The facile preparation strategy, ultrahigh adsorption capacities, record-high selectivity, and robust stability guarantee that this material is promising for upgrading low-quality natural gas.

Polynucleotides: Base Behaviour

Breakthrough analysis of the CO2/CH4 separation on electrospun carbon nanofibers

Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

Preparation of Zeolitic Imidazolate Framework-8-Based Nanofiber Composites for Carbon Dioxide Adsorption

Microstructure effect of carbon materials on the low-concentration methane adsorption separation from its mixture with nitrogen

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Adsorption of Carbon Dioxide with Ni-MOF-74 and MWCNT Incorporated Poly Acrylonitrile Nanofibers

Interplay Between Oxygen Doping And Ultra-Microporosity Improves The Co2/N-2 Separation Performance Of Carbons Derived From Aromatic Polycarboxylates

Effect of carbon nanofibers fabricated from electrospun PAN precursors on the characteristics and Densification of MgO–CaO Ceramic systems

Optimal Performance of Nanoporous Carbons on Adsorptive Separation of CO 2 from Flue Gas

Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons

A comprehensive study on the effect of carbonization temperature on the physical and chemical properties of carbon fibers

Preparing PAN/MOF nanofiber composite by electrospinning method for carbon dioxide adsorption

Enhancing CO 2 adsorption performance of porous nitrogen-doped carbon materials derived from ZIFs: Insights into pore structure and surface chemistry

Preparation and characterization of novel carbon molecular sieve membrane/PSSF composite by pyrolysis method for toluene adsorption

Tuning N-doping thermal-process enables biomass-carbon surface modification for potential separation effect of CO2/CH4/N2

Chemical Structure Evolution and Mechanism During Pre-Carbonization of PAN-based Stabilized Fiber in the Temperature Range of 350–600 °C

A multidegree‐of‐freedom manipulator for curtain‐wall installation

Lower oesophageal reflux during priming with vecuronium.

Tailoring microstructures of carbon fiber reinforced carbon aerogel-like matrix composites by carbonization to modulate their mechanical properties and thermal conductivities

Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas