Abstract:Service-life damage in reinforced concrete (RC) structure caused due to the actions of earthquake and cyclonic wind, and their multi-hazard effects is evaluated, by considering them as independent (uncorrelated) non-cascading hazards with and without considering the effects of chloride-induced corrosion in the structural members. Behavior of a structure to a certain hazard during its service life is affected by some past damages induced therein, albeit minor sometimes, and which are not often considered in the design process of the structure. In this study, a rectangular-plan 9-storey RC special moment-resisting frame (SMRF) building, assumed to be located in a region which is prone to both, seismic and wind activities, has been designed for various conventional load combinations prescribed by the relevant Indian standards/ design codes. The structural damage is evaluated in terms of a damage index, by performing nonlinear dynamic analysis for site-specific spectrum-compatible earthquake and local cyclonic wind conditions, while considering their cumulative effect on the structure as non-cascading independent hazards. Also, updated factor of safety for the column base has been determined after the building is exposed to different possible hazard scenarios. It has been observed that the damage in the RC structure due to independent earthquake and wind events can increase from 10% to even 200% when the effect due to chloride-induced corrosion in the structural members is considered in the analysis. Also, multi-hazard actions on the structure results in 1.5-fold increased damage as compared to the damage induced due to individual hazards, when the effect of corrosion of steel reinforcement is considered. Hence, a more realistic, rational, and holistic life cycle-based design approach has been presented here, based on the actual behavior of the structure that needs to be adopted while practicing design of structures under multiple hazards.

Combined Global Seismic Damage for 3D RC Buildings Using Recorded Floor-Displacement Data

Locate Damage Based on Change in Structural Shape Calculated from Uniform Load Surface

Damage assessment of unreinforced masonry buildings incorporating damage accumulation

Estimation of building damage caused by adjacent deep excavation in clay

Evaluating Damage Potential in Buildings Affected by Excavations

Machine Learning-Based Rapid Post-Earthquake Damage Detection of RC Resisting-Moment Frame Buildings

Computer-Vision and Machine-Learning-Based Seismic Damage Assessment of Reinforced Concrete Structures

Post-earthquake structural damage assessment and damage state evaluation for RC structures with experimental validation

Seismic Behaviour of RC Framed Building Supported on Combined Piled Raft Foundation in Sandy Soil

A Comparative Evaluation of Machine Learning Algorithms for the Prediction of R/C Buildings' Seismic Damage

Computer vision-based quantification of updated stiffness for damaged RC columns after earthquake

A performance-based rehabilitation strategy for RC frame buildings in moderate seismic regions

Estimation of Building Damage Due to Excavation-Induced Ground Movements

Assessment on detailed regional seismic damage risk of buildings based on time-history dynamic analyses

Assessment and Localization of Structural Damage in r/c Structures through Intelligent Seismic Signal Processing

A Machine-Learning-Based Seismic Vulnerability Assessment Approach for Low-Rise RC Buildings

Seismic Vulnerability Assessment of RC Frame Buildings Designed Using the DDBD Approach: A Parametric Study

Service-Life Damage Assessment of a Reinforced Concrete Structure under Multi-Hazard Seismic and Wind Actions

Damage Inference and Residual Capacity Assessment for an E-Defense 2018 Ten-Story RC Test Structure

Recent Advances on Analysis Methods and Modelling Approaches for Seismic Assessment and Design of Infilled RC Buildings

Classification of Buildings' Potential for Seismic Damage by Means of Artificial Intelligence Techniques