Abstract:Rapeseed straw, bagasse, and walnut peel have a large amount of resource reserves, but there are few technologies for high value-added utilization. In the research of biochar, walnut green husk is rarely used as raw material. In addition, the three main components of biomass (lignin, cellulose, and hemicellulose) are present in similar proportions, and the differences between the physical and chemical properties of biochar prepared with similar amounts of biomass raw materials are not clear. Using three kinds of biomass of the same quality as raw materials, biochar was prepared via pyrolysis at 400 °C, and activated carbon was prepared via CO2 activation at 800 °C. The results showed that the pore numbers of the three kinds of biochar increased after activation, resulting in the increase of the specific surface area. The resulting numbers were 352.99 m2/g for sugarcane bagasse biochar (SBB)-CO2, 215.04 m2/g for rapeseed straw biochar (RSB)-CO2, and 15.53 m2/g for walnut green husk biochar (WGB)-CO2. Ash increased the amount of carbon formation, but a large amount of ash caused biochar to form a perforated structure and decreased the specific surface area (e.g., WGB), which affected adsorption ability. When the three main components were present in similar proportions, a high content of cellulose and lignin was beneficial to the preparation of biochar. The adsorption value of MB by biochar decreased with the increase of biomass ash content. After activation, the maximum adsorption value of MB for bagasse biochar was 178.17 mg/g, rapeseed straw biochar was 119.25 mg/g, and walnut peel biochar was 85.92 mg/g when the concentration of methene blue solution was 300 mg/L and the biochar input was 0.1 g/100 mL at room temperature. The adsorption of MB by biochar in solution occurs simultaneously with physical adsorption and chemical adsorption, with chemical adsorption being dominant. The optimal MB adsorption by SBB-CO2 was dominated by multimolecular-layer adsorption. This experiment provides a theoretical basis for the preparation of biochar and research on its applications in the future.

Preparation and Characterization of Lignin‐Based Activated Carbon by Rubidium Chloride Chemical Method

Activated carbon from Myrica rubra (Chinese bayberry) stones using steam preparation and its adsorption capabilities

Preparation and characterization of cellulose-based activated carbon by cesium chloride chemical method

Preparation and Characterization of Activated Carbons Based Alkali Lignin by KOH Chemical Activation

Preparation of Lignin-Based Carbon Materials and Its Application as a Sorbent

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

Investigation of black liquor-derived carbon for removal of Cr(VI): Comparison with lignin-derived carbon

Chemically activated carbon preparation from natural rubber biosludge for the study of characterization, kinetics and isotherms, thermodynamics, reusability during Cr(VI) and methylene blue adsorption

Adsorption Property, Kinetic and Equilibrium Studies of Activated Carbon Fiber Prepared from Liquefied Wood by Zncl2 Activation

Low temperature physical activation of raw charcoal for excellent dye adsorption kinetics

Preparation And Characterization Of Activated Carbon From Kraft Lignin Via Koh Activation

The Role of Lignin Molecular Weight on Activated Carbon Pore Structure

Physicochemical and adsorption characteristics of activated carbons from cellulose, xylan and lignin

High adsorption capacity of phenol and methylene blue using activated carbon derived from lignocellulosic agriculture wastes

Methylene blue dye adsorption onto activated carbon developed from Calicotome villosa via H3PO4 activation

Porous ZnCl2-Activated Carbon from Shaddock Peel: Methylene Blue Adsorption Behavior

Preparation of microporous carbonaceous CO2 adsorbents by activating bamboo shoot shells with different chlorides: Experimental and theoretical calculations

Activated carbon prepared by co-pyrolysis of waste tobacco straw and waste LDPE mulch film: characterization and application for methylene blue removal

Efficient removal of Remazol Brilliant Blue R from water by a cellulose-based activated carbon

Preparation of Biomass Biochar with Components of Similar Proportions and Its Methylene Blue Adsorption

High adsorption of methyl orange by nitrogen-doped activated carbon derived from kraft lignin via self-activation