[Clinical aspects of the neurogenic control of circulation in arterial hypertension].

A. Zanchetti,G. Mancia

Medicina

Abstract:

What problem does this paper attempt to address?

3D printing of optical materials: an investigation of the microscopic properties

L. Persano,F. Cardarelli,A. Arinstein,S. Uttiya,E. Zussman,D. Pisignano,A. Camposeo

DOI: https://doi.org/10.48550/arXiv.1807.03201

2018-07-09

Applied Physics

Abstract:3D printing technologies are currently enabling the fabrication of objects with complex architectures and tailored properties. In such framework, the production of 3D optical structures, which are typically based on optical transparent matrices, optionally doped with active molecular compounds and nanoparticles, is still limited by the poor uniformity of the printed structures. Both bulk inhomogeneities and surface roughness of the printed structures can negatively affect the propagation of light in 3D printed optical components. Here we investigate photopolymerization-based printing processes by laser confocal microscopy. The experimental method we developed allows the printing process to be investigated in-situ, with microscale spatial resolution, and in real-time. The modelling of the photo-polymerization kinetics allows the different polymerization regimes to be investigated and the influence of process variables to be rationalized. In addition, the origin of the factors limiting light propagation in printed materials are rationalized, with the aim of envisaging effective experimental strategies to improve optical properties of printed materials.
Enhancing optical transparency of 3D printed PLA parts via multi-response optimization

Atish Kumar,Narendra Kumar

DOI: https://doi.org/10.1016/j.optlastec.2024.110865

IF: 4.939

2024-03-21

Optics & Laser Technology

Abstract:In the realm of Additive Manufacturing, Fused Filament Fabrication (FFF) is a popular technique that allows cost-effective fabrication of complex 3D models. However, achieving transparency in FFF parts unveils significant challenges due to the large dependency on process parameters. Thus, the current study presents an investigation of the effect of process parameters for the fabrication of transparent parts using Polylactic acid (PLA). The process parameters namely layer height, road width, and deposition speed were selected and their effects on the transmittance and spatial resolution have been studied. Response Surface Methodology (RSM) and Analysis of Variance have been used to study the effect of process parameters and obtain the optimum output responses. From the investigations, it has been concluded that layer height has a significant effect on transmittance and spatial resolution. Along with RSM, the Particle Swarm Optimization (PSO) technique has been used for the process parameters optimization. A case study has also been carried out for the practical implementation of the current investigation.

optics,physics, applied
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality

Gianluca Cicala,Davide Giordano,Claudio Tosto,Giovanni Filippone,Antonino Recca,Ignazio Blanco

DOI: https://doi.org/10.3390/ma11071191

IF: 3.4

2018-07-11

Materials

Abstract:Three commercial filaments for Fused Deposition Modeling (FDM) were selected to study the influence of polymer formulation on the printing quality and mechanical properties of FDM specimens. The three filaments were all based on polylactic acid (PLA) as the matrix, and they are sold as PLA filaments. The printing quality was tested by printing one complex shape with overhang features. The marked shear thinning behavior for two filaments was observed by rheology. The filaments were also studied by scanning electron microscopy and thermogravimetric analysis (TGA) to unveil their composition. The filaments with the best printing quality showed the presence of mineral fillers, which explained the melt behavior observed by rheology. The tensile testing confirmed that the filled PLA was the best-performing filament both in terms of printing quality and thermomechanical performance, with a p-value = 0.106 for the tensile modulus, and a p-value = 0.615 for the ultimate tensile strength.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Investigating the impact of laser polishing parameters on surface roughness, mass ablation rate, and optical transmittance of 3D‐printed PLA substrates

A. Bharatish,H. N. Narasimha Murthy,D. V. N. Harish,S. Mahendra Kumar,Sivakumar Solaiachari

DOI: https://doi.org/10.1002/app.55625

IF: 3

2024-04-27

Journal of Applied Polymer Science

Abstract:Laser polishing of 3D printed PLA. Laser polishing technique is one of the most effective post‐processing methods for 3D‐printed Polylactic acid (PLA) substrates and has gained significant interest of scientific research community in past few years. This paper aims to investigate the effect of fill density, laser power, and scanning speed on the polishing responses of 3D‐printed PLA substrates. These include surface roughness, mass ablation rate, and optical transmittance of PLA substrates printed using the fused deposition modeling technique. The optical transmittance was measured using Fourier‐transform infrared spectroscopy technique and surfaces were characterized using scanning electron microscope, and optical microscope. Minimum surface roughness of 1.04 μm was achieved at 5% laser power and 55% fill density constituting a decrease of 61.8% from unpolished PLA (2.735 μm). The lowest mass ablation rate (0.015 μg/pulse) was observed for the specimens with 40% infill density. Higher scanning speed enhanced the molecular bonding in PLA‐55 specimen indicated by increased peak transmittance ratios of CH bonds at stretching (1.021) and bending modes (1.045).

polymer science
Exploring the Impact of 3D Printing Parameters on the THz Optical Characteristics of COC Material

Mateusz Kaluza,Michal Walczakowski,Agnieszka Siemion

DOI: https://doi.org/10.3390/ma17205104

IF: 3.4

2024-10-19

Materials

Abstract:In terahertz (THz) optical systems, polymer-based manufacturing processes are employed to ensure product quality and the material performance necessary for proper system maintenance. Therefore, the precise manufacturing of system components, such as optical elements, is crucial for the optimal functioning of the systems. In this study, the authors investigated the impact of various 3D printing parameters using fused deposition modeling (FDM) on the optical properties of manufactured structures within the THz radiation range. The measurements were conducted on 3D printed samples using highly transparent and biocompatible cyclic olefin copolymer (COC), which may find applications in THz passive optics for "in vivo" measurements. The results of this study indicate that certain printing parameters significantly affect the optical behavior of the fabricated structures. The improperly configured printing parameters result in the worsening of THz optical properties. This is proved through a significant change in the refractive index value and undesirable increase in the absorption coefficient value. Furthermore, such misconfigurations may lead to the occurrence of defects within the printed structures. Finally, the recommended printing parameters, which improve the optical performance of the manufactured structures are presented.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Comprehensive characterization of mechanical and physical properties of PLA structures printed by FFF-3D-printing process in different directions

Giulia Morettini,Massimiliano Palmieri,Lorenzo Capponi,Luca Landi

DOI: https://doi.org/10.1007/s40964-022-00285-8

2022-03-25

Progress in Additive Manufacturing

Abstract:Abstract The industrial interest in additive manufacturing (AM) techniques is currently increasing for the realization of functional mechanical components. For this reason, the structural simulation of parts or complete structures made using this new manufacturing technique is gaining considerable importance. To realise accurate finite element models for the purpose of predicting the dynamic or static behaviour of the component printed and avoid unexpected failures, it is necessary to be aware of some mechanical and physical properties of the print material. Unfortunately, in the literature, it is very difficult to find all the data necessary to perform static or dynamic simulations of 3D printed parts. In this context, this activity aims to determine all these mechanical and physical properties for parts made in White-Pearl Polylactic-acid (PLA) Ultimaker filament using the Fused Filament Fabrication (FFF) technique. A set of printing parameters was chosen and kept constant in all tests which, based on literature data, maximizes the static strength and the fatigue limit of the component. Only the building direction was varied to increase the applicability of the obtained results to any geometry. The main results found for the horizontally moulded specimens (representing the best constructive solution) are the Ultimate Tensile Strength equal to 57.15 MPa, the elastic modulus 2606 MPa, the fatigue limit evaluated at $$2 \times 10^{6}$$ 2 × 10 6 cycles equal to 13.5 MPa, the damping and density of the material of 0.008 dimensionless value and 1.1246 g/cm 3 , respectively. Only thanks to the obtained results, finite element models can be developed for reliable static and dynamic analysis.
Mechanical characterization of additively manufactured polymers using ultrasonic nondestructive testing

Akash Nivarthi,Michael R. Haberman,Christina Naify

DOI: https://doi.org/10.1121/10.0018874

2023-03-01

The Journal of the Acoustical Society of America

Abstract:Ultrasonic nondestructive testing (NDT) can be used to relate the print settings of additively manufactured polymers to their macroscopic elastic properties. We present a comparison of the measurement of angle- and frequency-dependent ultrasonic transmission through a flat plate to predictions using a multiscale model that considers infill geometry and constitutive material properties. The experiment is an immersion test that uses a point source and synthetic linear array to measure the transmission coefficient from 0.2 to 1 MHz over a wide range of incident angles. Samples were fabricated using fused deposition modeling (FDM) to print infilled plates with polylactic acid (PLA) filament. Transmission measurements were compared to predictions from a multiscale model consisting of a finite element model to predict the effective anisotropic stiffness based on an assumed infill geometry and PLA material properties and an acoustic reflection-transmission model for an anisotropic elastic plate submerged in water based on the work of Rokhlin and Wang [J. Acoust. Soc. Am. 112, 822 (2002)]. Minimization of the difference between the measured and modeled transmission coefficient for all angles and frequencies by varying model inputs provides an improved understanding of the effects of the print settings on the as-built mechanical properties for 3D-printed materials.

acoustics,audiology & speech-language pathology
Comparative analysis of 3D-printed polylactic acid and acrylonitrile butadiene styrene: Experimental and Materials-Studio-based theoretical studies

DOI: https://doi.org/10.1007/s10965-022-03075-6

IF: 3.061

2022-06-24

Journal of Polymer Research

Abstract:This article reports a combination of experimental and computational approaches that were used to study the properties of 3D-printed polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). Both experimental and ab initio structural computations were used to characterize the structural, electronic, optical and mechanical properties of printed packaging products. The 3D- printed PLA and ABS, which were obtained via lab-scale filament extrusion, exhibited tensile strengths of 39.07 and 16.12 MPa, respectively. Theoretical examination of both PLA and ABS was achieved by density functional theory (DFT) approach generated by the Cambridge Serial Total Package (CASTEP) and forcite module in the material studio (MS) software. Norm conserving module was used as the plane wave basis pseudopotential for ABS and PLA energy calculations, ensuring scattering properties of the pseudopotential were correctly reproduced. In all simulations, molecular structures were geometrically optimized using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm. The exchange correlation functionals used in the determination of electronic properties of the polymers were generalized by gradient approximation under Perdew-Burke-Ernzehorf. The calculated band structure of 1.899 and 2.539 eV for PLA and ABS, respectively, and the computed density of states, all suggested poor conductivity for both materials. This phenomenon was supported by the low computed values of the work functions (Φ) 3.364 eV and 4.503 eV, which signified wide separation between the fermi and vacuum level hence reduced charge carriers. Overall, the good mechanical properties of PLA to ABS are in agreement with values obtained in other studies. In particular, PLA is a greener alternative in packaging and biomedical applications since it is derived from renewable resources and can be used in applications requiring biodegradability.

polymer science
Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials

Sridharan Kannan,Manoharan Ramamoorthy

DOI: https://doi.org/10.1088/2053-1591/ab6a48

IF: 2.025

2020-01-01

Materials Research Express

Abstract:Abstract Additive manufacturing (AM) process builds the parts, layer by layer precisely from Computer-Aided Design (CAD) models, whereas traditional subtractive manufacturing process removes layers from materials to attain the desired shape. Of late Rapid prototyped (RP) parts are used for the direct production of components for manufacturing and testing in the industries. Understanding material, machine used along with the process variables that affect the strength of the final part gains importance as the parts can be printed directly from CAD data and effectively integrated into structures. The main aim of this investigation is to present the mechanical characterization and free vibration analysis of various 3D printed Engineering Plastic Materials. Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC), and Polycarbonate–Acrylonitrile Butadiene Styrene (PC-ABS) materials are used in this study. Spools are prepared from plastic pellets using wire extruder. Tensile tests have been performed on dog bone specimens to evaluate strength, fractured specimen’s surfaces which are further evaluated using Field Emission Scanning Electron Microscope (FESEM) to explore fracture of the raster and bonding between layers. From the experimental results it’s noticed that the PC-ABS material exhibits improved elastic limit and load-carrying capacity compared with ABS and PC. Three types of beams are fabricated using different materials and modal analysis has been conducted to predict the stiffness of beams in terms of natural frequencies under clamped free (CF) and clamped clamped (CC) end conditions. Higher natural frequencies observed with PC-ABS is compared with the rest of the materials.

materials science, multidisciplinary
Advancing optical transparency in 3D‐printed PLA parts using chemical post‐processing

Atish Kumar,Narendra Kumar,Sampath Kumar Puttapati

DOI: https://doi.org/10.1002/pen.27010

2024-11-08

Polymer Engineering & Science

Abstract:Route of chemical post‐processing of 3D printed PLA parts for transparency advancement. Fused filament fabrication (FFF) is an increasingly popular three‐dimensional (3D) printing technology known for its ability to produce complex 3D models at a low‐cost using polymer materials. Despite its advantages, the poor surface finish and high layer resolution in FFF‐printed parts have hindered its wider adoption, particularly for applications requiring high transparency. Thus, the current study investigates the transparency evaluation of chemically post‐processed 3D‐printed transparent polylactic acid (PLA) parts, focusing on enhancing optical transparency. Fused Filament Fabrication was employed to produce transparent parts made from PLA filament, which were subsequently treated at various time settings using various solvents, including tetrahydrofuran (THF), chloroform or trichloromethane (TCM), and ethyl acetate (EA). This study examines the impact of chemical post‐processing on the surface roughness, transparency, mechanical properties, and dimensional accuracy of solvent treated parts. It has been found that the THF solvent with 40 s of immersion time resulted in a maximum transmittance of 74.66% and minimum surface roughness of 1.777 μm. Based on this finding a case study was also conducted to apply the findings of the current investigation to a practical application. The findings highlight the potential of chemical‐based post‐processing techniques to improve the optical properties of 3D printed PLA, offering a promising approach for applications in optics, medical devices, and consumer goods requiring transparent components. Highlights Effect of chemical post‐processing on 3D‐printed PLA parts was investigated. Tetrahydrofuran, chloroform, and ethyl acetate were used as solvents. Surface roughness, transparency, hardness, and dimensional accuracy were analyzed. Reported a maximum transmittance of 74.66% and minimum surface roughness of 1.777 μm.

engineering, chemical,polymer science
Correlation between production parameters and mechanical properties of ABS plus p430 fused deposition material

M Corsi,S Bagassi,MC Moruzzi,L Seccia

DOI: https://doi.org/10.1177/09544062211027205

2021-06-28

Abstract:Fused Deposition Modeling (FDM), is one of the most popular and widely used Additive Manufacturing filament based technology employing materials such as Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC), Thermoplastic Polyurethane (TPU) and Polylactic Acid (PLA). In this technique, the part is built up layer-by-layer, affecting, both the resolution along the z-axis, and the mechanical properties dependent on the mesostructure, controlled by a large amount of production parameters such as layer thickness, raster orientation, number of contour and air gap. When dealing with functional and structural printed parts, a deep understanding of these tunable building parameters and their influence on the mechanical properties is of the utmost importance and over the years many experimental studies have been carried to investigate this need. This study is intended to explore specimens realized through FDM technique with different combinations of printing parameters to analyse their effect on the mechanical properties of ABS Plus p430. To this aim, tensile and compression specimens, had been designed and tested. Sixteen different types of tensile specimen had been realized by varying four different parameters, namely, layer thickness, part interior style, infill orientation and number of contours. Whereas, the number of compression specimens had been limited to four considering the variation of two parameters: layer thickness and part interior style. Three samples for each specimen had been produced in ABS Plus p430 using a Stratasys Fortus 250mc FDM printer and tested with a universal testing machine through tension and compression tests to analyse the correlation between printing parameters and material properties. Test results had led to important conclusions on the consistency and homogeneity of the mechanical properties and on the variation of the material’s performances in accordance with the different combinations of production parameters.

engineering, mechanical
Wear and Dynamic Mechanical Analysis (DMA) of Samples Produced via Fused Deposition Modelling (FDM) 3D Printing Method

Jiri Struz,Miroslav Trochta,Lukas Hruzik,Daniel Pistacek,Sylwester Stawarz,Wojciech Kucharczyk,Miroslaw Rucki

DOI: https://doi.org/10.3390/polym16213018

IF: 5

2024-10-28

Polymers

Abstract:In recent years, plastic and metal 3D printing has experienced massive development in the professional and hobby spheres, especially for rapid prototyping, reverse engineering, maintenance and quick repairs. However, this technology is limited by a number of factors, with the most common being the cost and availability of the technology but also the lack of information on material properties. This study focuses on investigating the material properties of PLA, PETG, HIPS, PA, ABS and ASA in order to elucidate their behavior in terms of wear and thermal resistance. The research builds on previous studies focusing on the mechanical properties of these materials and includes wear testing and DMA analysis. Weight loss, frictional forces, and frictional work including relative frictional work are recorded as part of this testing. The storage modulus and loss modulus including tan(δ) were then measured using DMA.

polymer science
Investigation of thermal and dimensional behavior of 3-D printed materials using thermal imaging and 3-D scanning

Zorana Golubovic,Milan Travica,Isaak Trajkovic,Aleksandar Petrovic,Zarko Miskovic,Nenad Mitrovic

DOI: https://doi.org/10.2298/tsci2301021g

IF: 1.971

2023-01-01

Thermal Science

Abstract:Fused deposition modeling is one of the most widely used 3-D printing technologies, among other additive manufacturing processes, because it is easy to use, can produce parts faster, and the cost of the finished part is low. Printing processes and finished parts are often studied and characterized using different techniques to collect mechanical, numerical, thermal and dimensional data, with the aim of improving and optimizing the result. The first part of this research is based on the observation of temperature changes with a thermal imaging camera during the fused deposition modeling printing process and during the cooling process after printing. Specimens of polylactic acid and polylactic acid-X improved with second-phase particles were prepared to compare the thermal and dimensional properties of the two materials. The obtained results determined the characteristic temperature behavior of the materials. In the second part of the research, a 3-D optical scanner was used to verify the stability and accuracy of the printed specimens over time. The proposed measurement period showed that stabilization of the parameters takes place, and further follow-up should be performed thereafter.

thermodynamics
Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Cleiton Lazaro Fazolo De Assis,Cleber Augusto Rampazo

DOI: https://doi.org/10.1108/rpj-04-2023-0153

2023-10-07

Rapid Prototyping Journal

Abstract:Purpose This paper aims to evaluate the mechanical behaviour of polycarbonate/acrylonitrile butadiene styrene (PC/ABS) filaments for fusion filament fabrication (FFF). PC/ABS have emerged as a promising material for FFF due to their excellent mechanical properties. However, the optimal processing conditions and the effect of the blending ratio on the mechanical properties of the resulting workpieces are still unclear. Design/methodology/approach A statistical factorial matrix was designed, including infill pattern, printing speed, nozzle size, layer height and printing temperature as factors (with three levels). A total of 810 workpieces were printed using PC/ABS blends filament with the FFF. The workpieces' finishing and mass were evaluated. Tensile tests were performed. Analysis of variance was performed to determine the main effects of the processing conditions on the mechanical properties. Findings The results showed that the PC/ABS (70/30) exhibited higher tensile. Tensile rupture corresponded to 30% of the tensile strength. The infill pattern showed the highest contribution to the responses. The concentric pattern showed higher tensile strength. Tensile strength and mass ratio demonstrated the influence of mass on tensile strength. The influence of printing parameters on deformation depended on the blend proportions. Higher printing speed and lower layer height provided better quality workpieces. Originality/value This study has implications for the design and manufacturing of three-dimensional printed parts using PC/ABS filaments. An extensive experimental matrix was applied, aiming at a complete understanding of mechanical behavior, considering the main printing parameters and combinations not explored by literature.

engineering, mechanical,materials science, multidisciplinary
Evaluation of Mechanical Properties of ABS-like Resin for Stereolithography Versus ABS for Fused Deposition Modeling in Three-Dimensional Printing Applications for Odontology

Victor Paes Dias Gonçalves,Carlos Maurício Fontes Vieira,Noan Tonini Simonassi,Felipe Perissé Duarte Lopes,George Youssef,Henry A. Colorado

DOI: https://doi.org/10.3390/polym16202921

IF: 5

2024-10-18

Polymers

Abstract:This study investigates the differences in mechanical properties between acrylonitrile butadiene styrene (ABS) samples produced using fused deposition modeling (FDM) and stereolithography (SLA) using ABS filaments and ABS-like resin, respectively. The central question is to determine how these distinct printing techniques affect the properties of ABS and ABS-like resin and which method delivers superior performance for specific applications, particularly in dental treatments. The evaluation methods used in this study included Shore D hardness, accelerated aging, tensile testing, Izod impact testing, flexural resistance measured by a 3-point bending test, and compression testing. Poisson's ratio was also assessed, along with microstructure characterization, density measurement, confocal microscopy, dilatometry, wettability, Fourier-transform infrared spectroscopy (FTIR), and nanoindentation. It was concluded that ABS has the same hardness in both manufacturing methods; however, the FDM process results in significantly superior mechanical properties compared to SLA. Microscopy demonstrates a more accurate sample geometry when fabricated with SLA. It is also concluded that printable ABS is suitable for applications in dentistry to fabricate models and surgical guides using the SLA and FDM methods, as well as facial protectors for sports using the FDM method.

polymer science
Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling

M. Ouhsti,B. El Haddadi,S. Belhouideg

DOI: https://doi.org/10.2478/mme-2018-0070

2018-12-01

Mechanics and Mechanical Engineering

Abstract:Abstract 3D polymer-based printers have become easily accessible to the public. Usually, the technology used by these 3D printers is Fused Deposition Modelling (FDM). The majority of these 3D printers mainly use acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) to fabricate 3D objects. In order for the printed parts to be useful for specific applications, the mechanical properties of the printed parts must be known. The aim of this study is to determine the tensile strength and elastic modulus of printed materials in polylactic acid (PLA) according to three important printing parameters such as deposition angle, extruder temperature and printing speed. The central composite design (CCD) was used to reduce the number of tensile test experiments. The obtained results show that the mechanical properties of printed parts depend on printing parameters. Empirical models relating response and process parameters are developed. The analysis of variance (ANOVA) was used to test the validity of models relating response and printing parameters. The optimal printing parameters are determined for the desired mechanical properties.
Correlation between Infill Percentages, Layer Width, and Mechanical Properties in Fused Deposition Modelling of Poly-Lactic Acid 3D Printing

Mahmoud Moradi,Mohammad Rezayat,Fakhir Aziz Rasul Rozhbiany,Saleh Meiabadi,Giuseppe Casalino,Mahmoud Shamsborhan,Amar Bijoy,Sidharth Chakkingal,Mathews Lawrence,Nasli Mohammed,Mojtaba Karamimoghadam

DOI: https://doi.org/10.3390/machines11100950

IF: 2.899

2023-10-13

Machines

Abstract:The field of additive manufacturing (AM) has seen a transformation in the production of intricate and complex parts for various applications. Fused Deposition Modelling (FDM), among AM techniques, has garnered significant attention, particularly in fields like fibre-reinforced composites (FRC). In this study, the world of FDM-printed Polylactic Acid (PLA) components is explored, with a focus on how mechanical properties are influenced by infill percentages and layer widths. Through the utilisation of Response Surface Methodology (RSM), the optimisation of FDM-PLA 3D printing for a wide range of biomaterial applications is achieved, along with the unveiling of the potential for remarkable improvements in mechanical performance. Notably, a remarkable 91% reduction in surface roughness for PLA composites was achieved, accompanied by an impressive 25.6% and 34.1% enhancement in the tensile strength and Young's modulus of fibre-reinforced PLA composites, respectively. This work, positioned at the crossroads of FDM, lays the groundwork for substantial advancements in the realm of additive manufacturing.

engineering, mechanical, electrical & electronic
Production of Composite Zinc Oxide–Polylactic Acid Radiopaque Filaments for Fused Deposition Modeling: First Stage of a Feasibility Study

Francesca Cherubini,Nicole Riberti,Anna Maria Schiavone,Fabrizio Davì,Michele Furlani,Alessandra Giuliani,Gianni Barucca,Maria Cristina Cassani,Daniele Rinaldi,Luigi Montalto

DOI: https://doi.org/10.3390/ma17122892

IF: 3.4

2024-06-14

Materials

Abstract:Three-dimensional printing technologies are becoming increasingly attractive for their versatility; the geometrical customizability and manageability of the final product properties are the key points. This work aims to assess the feasibility of producing radiopaque filaments for fused deposition modeling (FDM), a 3D printing technology, starting with zinc oxide (ZnO) and polylactic acid (PLA) as the raw materials. Indeed, ZnO and PLA are promising materials due to their non-toxic and biocompatible nature. Pellets of PLA and ZnO in the form of nanoparticles were mixed together using ethanol; this homogenous mixture was processed by a commercial extruder, optimizing the process parameters for obtaining mechanically stable samples. Scanning electron microscopy analyses were used to assess, in the extruded samples, the homogenous distribution of the ZnO in the PLA matrix. Moreover, X-ray microtomography revealed a certain homogenous radiopacity; this imaging technique also confirmed the correct distribution of the ZnO in the PLA matrix. Thus, our tests showed that mechanically stable radiopaque filaments, ready for FDM systems, were obtained by homogenously loading the PLA with a maximum ZnO content of 6.5% wt. (nominal). This study produced multiple outcomes. We demonstrated the feasibility of producing radiopaque filaments for additive manufacturing using safe materials. Moreover, each phase of the process is cost-effective and green-oriented; in fact, the homogenous mixture of PLA and ZnO requires only a small amount of ethanol, which evaporates in minutes without any temperature adjustment. Finally, both the extruding and the FDM technologies are the most accessible systems for the additive manufacturing commercial apparatuses.

materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter
Study of selected properties of PLA used in 3D printing

K. Sośniak,D. Biela,D. Szalaty,D. Szalaty,M. Ścieszka,M. Polok-Rubiniec,A. Włodarczyk-Fligier,A. Kania

DOI: https://doi.org/10.5604/01.3001.0053.4035

2023-02-01

Journal of Achievements in Materials and Manufacturing Engineering

Abstract:This study focuses on determining the best possible structure of the orthosis made with FDM 3D printing technology. To produce the samples, a thermoplastic PLA material was selected that met the conditions of biodegradability, biocompatibility and non-toxicity. The samples produced were subjected to a tensile strength test and corrosion resistance.Studies based on FEM analysis were carried out using the advanced engineering software CAE - Inventor. The samples were designed in the CAD system, while the G-Code path was generated using the PrusaSlicer 2.5.0 program dedicated to the Prusa i3 MK3S+ printer, which was used to create the models. Surface morphology observations of PLA were carried out with a Zeiss SUPRA 35 scanning electron microscope (SEM). The static tensile test was performed on the Zwick/Roell z100 device based on the PN-EN ISO 527:1 standard. Electrochemical corrosion tests were carried out using the Autolab PGSTAT302N Multi BA potentiostat in Ringer solution at a temperature of 37C.The research allowed the appropriate structure of the orthosis made of PLA polymer material using 3D FDM printing technology. The static tensile test, SEM and corrosion tests confirmed the correct application of this material for the selected purpose. It was possible to determine that samples with holes of 10 mm had the highest strength properties. Due to the tensile tests, the average tensile strength of those samples was around 61 MPa. The corrosion parameters of PLA were determined using Tafel analysis.The research methodology proposed in work can be used to study other biomedical materials. The results presented can be the basis for further tests in order to search for the best orthopaedic stabiliser.The innovative part of the article are three different versions of structures intended for making orthoses used in medicine.
ON THE SURFACE ROUGHNESS OF 3D PRINTED PARTS WITH FDM BY A LOW-BUDGET COMMERCIAL PRINTER

Ioannis T. Christodoulou,Vasiliki E. Alexopoulou,Nikolaos E. Karkalos,Emmanouil L. Papazoglou,Angelos P. Markopoulos

DOI: https://doi.org/10.20998/2078-7405.2022.96.06

2022-03-02

Abstract:As additive manufacturing machines price is decreasing, while, at the same time, the expertise in the relevant field is rising, it is essential to test and evaluate the low-budget machines that are available for commercial use. Whilst low-budget machines are widely utilized for rapid prototyping and experimentation, they are not capable of producing parts with high surface quality and achieve high levels of repeatability due to low quality hardware and not optimized software. Having said that, the main aim of the current study is to experiment with a low budget Fused Deposition Modeling (FDM) 3D-Printer, and evaluate the surface roughness of the printed parts in respect to the angle from the print plate. Polylactic Acid (PLA) was chosen as filament material, while the printed parts surface roughness was measured according to the ISO ASTM 52902-2021 standard. The surface roughness was estimated in terms of the Ra and Rz values, while a statistical analysis was implemented in order some interesting conclusions to be deduced regarding the correlation between part orientation and surface quality.

[Clinical aspects of the neurogenic control of circulation in arterial hypertension].

3D printing of optical materials: an investigation of the microscopic properties

Enhancing optical transparency of 3D printed PLA parts via multi-response optimization

Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality

Investigating the impact of laser polishing parameters on surface roughness, mass ablation rate, and optical transmittance of 3D‐printed PLA substrates

Exploring the Impact of 3D Printing Parameters on the THz Optical Characteristics of COC Material

Comprehensive characterization of mechanical and physical properties of PLA structures printed by FFF-3D-printing process in different directions

Mechanical characterization of additively manufactured polymers using ultrasonic nondestructive testing

Comparative analysis of 3D-printed polylactic acid and acrylonitrile butadiene styrene: Experimental and Materials-Studio-based theoretical studies

Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials

Advancing optical transparency in 3D‐printed PLA parts using chemical post‐processing

Correlation between production parameters and mechanical properties of ABS plus p430 fused deposition material

Wear and Dynamic Mechanical Analysis (DMA) of Samples Produced via Fused Deposition Modelling (FDM) 3D Printing Method

Investigation of thermal and dimensional behavior of 3-D printed materials using thermal imaging and 3-D scanning

Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Evaluation of Mechanical Properties of ABS-like Resin for Stereolithography Versus ABS for Fused Deposition Modeling in Three-Dimensional Printing Applications for Odontology

Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling

Correlation between Infill Percentages, Layer Width, and Mechanical Properties in Fused Deposition Modelling of Poly-Lactic Acid 3D Printing

Production of Composite Zinc Oxide–Polylactic Acid Radiopaque Filaments for Fused Deposition Modeling: First Stage of a Feasibility Study

Study of selected properties of PLA used in 3D printing

ON THE SURFACE ROUGHNESS OF 3D PRINTED PARTS WITH FDM BY A LOW-BUDGET COMMERCIAL PRINTER