Abstract:Interest in point-of-care diagnostics has led to increasing demand for the development of nanomaterial-based electronic biosensors such as biosensor field-effect transistors (BioFETs) due to their inherent simplicity, sensitivity, and scalability. The utility of BioFETs, which use electrical transduction to detect biological signals, is directly dependent upon their electrical stability in detection-relevant environments. BioFET device structures vary substantially, especially in electrode passivation modalities. Improper passivation of electronic components in ionic solutions can lead to excessive leakage currents and signal drift, thus presenting a hinderance to signal detectability. Here, we harness the sensitivity of nanomaterials to study the effects of various passivation strategies on the performance and stability of a transistor-based biosensing platform based on aerosol-jet-printed carbon nanotube thin-film transistors. Specifically, non-passivated devices were compared to devices passivated with photoresist (SU-8), dielectric (HfO2), or photoresist + dielectric (SU-8 followed by HfO2) and were evaluated primarily by initial performance metrics, large-scale device yield, and stability throughout long-duration cycling in phosphate buffered saline. We find that all three passivation conditions result in improved device performance compared to non-passivated devices, with the photoresist + dielectric strategy providing the lowest average leakage current in solution (~2 nA). Notably, the photoresist + dielectric strategy also results in the greatest yield of BioFET devices meeting our selected performance criteria on a wafer scale (~90%), the highest long-term stability in solution (<0.01% change in on-current), and the best average on/off-current ratio (~104), hysteresis (~32 mV), and subthreshold swing (~192 mV/decade). This passivation schema has the potential to pave the path toward a truly high-yield, stable, and robust electrical biosensing platform.

Proposition of optimal self-curing method in horizontal-floating gate FET-type gas sensors for reliability improvement

Reliability of FET-type gas sensor with asymmetric air-gap micro-heater structure considering thermoelectric effect

Extended-Gate Structure for Carbon-Based Field Effect Transistor Type Formaldehyde Gas Sensor

Oxygen-assisted Recoverable Hydrogen Sensor Based on Sensing Gate Field Effect Transistor with Ppb-Level Detection Ability

Highly Reliable Organic Field-Effect Transistors with Molecular Additives for a High-Performance Printed Gas Sensor

A Proof of Concept for Reliability Aware Analysis of Junctionless Negative Capacitance FinFET-based Hydrogen Sensor

On‐Chip Annealing Using Embedded Micro‐Heater for Highly Sensitive and Selective Gas Detection

Carbon Nanotube-Based Field-Effect Transistor-Type Sensor with a Sensing Gate for Ppb-Level Formaldehyde Detection

Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Passivation Strategies for Enhancing Solution-Gated Carbon Nanotube Field-Effect Transistor Biosensing Performance and Stability in Ionic Solutions

Enhancing Sensitivity in Gas Detection: Porous Structures in Organic Field-Effect Transistor-Based Sensors

Polymer Ring-Flexure-Membrane Suspended Gate FET Gas Sensor: Design, Modelling and Simulation

Insight into over Repair of Hot Carrier Degradation by GIDL Current in Si p-FinFETs Using Ultra-Fast Measurement Technique

High-performance extended-gate ion-sensitive field-effect transistors with multi-gate structure for transparent, flexible, and wearable biosensors

Smart pH Sensing: A Self-Sensitivity Programmable Platform with Multi-Functional Charge-Trap-Flash ISFET Technology

Observation Of Self-Recoverable Gate Degradation In P-Gan Algan/Gan Hemts After Long-Term Forward Gate Stress: The Trapping & Detrapping Dynamics Of Hole/Electron

Carboxylic Acid‐Functionalized Conjugated Polymer Promoting Diminished Electronic Drift and Amplified Proton Sensitivity of Remote Gates Compared to Nonpolar Surfaces in Aqueous Media

Unencapsulated Air-stable Organic Field Effect Transistor by All Solution Processes for Low Power Vapor Sensing

In-Memory-Computed Low-Frequency Noise Spectroscopy for Selective Gas Detection Using a Reducible Metal Oxide

Long-term reliable wireless H2 gas sensor via repeatable thermal refreshing of palladium nanowire

Enhancement of Ion-Sensitive Field-Effect Transistors through Sol-Gel Processed Lead Zirconate Titanate Ferroelectric Film Integration and Coplanar Gate Sensing Paradigm