Abstract:Cold metal transition (CMT) arc additive manufacturing (CMT-AM) technology can rapidly fabricate large-scale components, but encounters the challenges in improving efficiency, accuracy, and mechanical properties. Fortunately, oscillating laser-arc hybrid additive manufacturing (O-LHAM) provides a promising solution by stabilizing the arc at high current or high-speed, effectively addressing these issues. However, most studies primarily focus on thin-walled parts rather than entities, which are fabricated using multi-layer and multi-pass processes. The microstructure and mechanical properties vary with deposition strategies and greater heat accumulation. This paper therefore investigates the effects of deposition strategies on the formation, microstructure, and tensile properties of 100 mm × 100 mm × 70 mm O-LHAMed entities with a maximum feeding speed of 18 m/min. It is found that employing a continuous reciprocating deposition strategy without arc extinguishing within the same layer effectively avoids the mismatch between the actual and designed shape. At this stage, the deposition efficiency can reach 848 cm 3 /h, which is 2.25 times that of CMT-AMed parts reported in the literature. Deposition strategies do not affect the microstructures of different cross-sections of the entities. However, using multiple high currents facilitates the effect of solution heat treatment, leading to a transition in crystal solidification from ferrite-austenite mode in thin-walled parts to fully austenite mode, and ferrites within entity grains mostly disappear. Moreover, despite the deposition strategies exert minimal influence on the tensile properties, the entity fabricated using a 90° continuous deposition strategy achieves an enhanced equilibrium among forming, microstructural, and performance due to its more random heat dissipation. The ultimate tensile strengths and elongations of all entities fall within the range of 518 ∼ 544 MPa and 34.2 %∼47.5 %, respectively, meeting the ASTM A479 standard. These findings greatly expand the potential applications of O-LHAM, facilitating the more efficient and high-quality fabrication of various metal parts, thus accelerating industrialization.

Fabricating exceptionally efficiency and mechanically superior entity through optimized deposition strategy in oscillating laser-arc hybrid additive manufacturing

Parallel Multi Arc Directed Energy Deposition: New Way to Achieve Efficient Manufacturing of Large-Size Lattice Sandwich Structure

Improving the Formability and Quality of CMT Additively Manufactured Aluminum Thin-Wall Parts Via Laser Stabilization Effect

Microstructure and Mechanical Properties of 304L Steel Fabricated by Arc Additive Manufacturing

Oscillating Laser-Arc Hybrid Additive Manufacturing of AZ31 Magnesium Alloy

Macro/micro-structure and Mechanical Properties of Al-6Mg-0.3Sc Alloy Fabricated by Oscillating Laser-Arc Hybrid Additive Manufacturing

High-efficient hybrid arc and friction stir additive manufacturing of high-performance Al-Cu-Mg-Ag-Zr alloy: Microstructural evolution and precipitation behaviors with Ω/L1 2 co-precipitates

High-efficient Hybrid Arc and Friction Stir Additive Manufacturing of High-Performance Al-Cu-Mg-Ag-Zr Alloy: Microstructural Evolution and Precipitation Behaviors with Ω/L12 Co-Precipitates

Microstructure and Mechanical Properties of an Ultra-High Strength Steel Fabricated by Laser Hybrid Additive Manufacturing

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

Refined microstructure and enhanced mechanical performance of hybrid additive manufacturing Al-Cu-Mg alloys by multi-cycle friction stirring processing

Microstructure and Mechanical Properties of GH4169 Thin-Walled Parts Fabricated by Ultrasonic Vibration Assisted Laser Directed Energy Deposition/milling Hybrid Process

Enhanced surface finish and reduced porosity of TiC nanoparticles reinforced 2219 aluminum alloy deposit fabricated via oscillating laser-arc hybrid additive manufacturing

Effect of beam oscillating amplitude on forming quality, microstructure, and mechanical performance of Al-Mg-Sc alloy fabricated by laser-arc hybrid additive manufacturing

Multi-Objective Optimization for Forming Quality of Laser and CMT-P Arc Hybrid Additive Manufacturing Aluminum Alloy Using Response Surface Methodology

Deposition Stability and Forming Characteristics in Laser-Arc Hybrid Additive Manufacturing of Aluminum Alloy Through Beam Oscillation

Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations

Surface Morphology, Microstructure and Mechanical Properties of Al–Mg–Sc Alloy Thin Wall Produced by Laser-Arc Hybrid Additive Manufacturing

Laser–Direct Current arc Hybrid Additive Manufacturing of Cu-Cr-Zr Alloy: Microstructure Evaluation and Mechanical Properties

An Approach to Improve the Microstructure and Mechanical Properties: A Hybrid Manufacturing of Laser Directed Energy Deposition and Shot Peening

Influence of Different Deposition Strategies on the Microstructure and Mechanical Properties of the Laminated Heterostructured Material with ER130S-G HSS and 316 L SS Fabricated by WAAM