Abstract:In a previous publication [Macromolecules2019,52, 5245–5254], we described the synthesis of surfactant-free latex dispersions of nanoparticles (NPs) based on emulsification of a preformed proprietary BASF polymer (MnGPC = 5000 g/mol, D̵ = 3), in which the −COOH groups were partially neutralized by using ammonia. The NPs in these dispersions were then partially cross-linked with neopentyl glycol diglycidyl ether (NGDE) to increase the molecular weight, followed by reaction with monoglycidyl ether to reduce the acid number and lower the glass transition temperature (Tg). In the work reported here, we used fluorescence resonance energy transfer (FRET) measurements to examine polymer diffusion rates in the films formed from these dispersions. We compared films formed from the uncross-linked NPs, with ones containing the NPs partially cross-linked with NGDE but not reacted with the monoepoxide. In this way, both the cross-linked and noncross-linked polymers had similar Tg values. We also examined films formed from a similar polymer with MnGPC = 4000 g/mol, D̵ = 3. Because of the high Tg of these polymers (ca. 65 °C), films were formed on heated substrates, and this led to skin formation at the film surface. We used FRET measurements to monitor the extent of polymer diffusion at both the film–air (F–A) and film–substrate (F–S) interfaces. We found that the onset of polymer diffusion occurred more rapidly within the skin at the F–A interface at elevated temperatures, but this was quickly surpassed by polymer diffusion at the bottom of the film because of the hydroplasticization effect. The presence of the skin layer retarded water evaporation and extended the time needed for the efficiency of energy transfer to reach its plateau value. We also found that the extent of chain diffusion in the partially cross-linked (XL) films was reduced compared to the non-XL samples because of limited interdiffusion of the polymer that formed the gel content. Dynamic mechanical analysis was employed to investigate the viscoelastic behavior of the samples using time–temperature superposition to generate master curves. We calculated apparent activation energies in the temperature range of the FRET experiments that were consistent with the strong dependence of polymer diffusion rates on the difference between the annealing temperature and glass transition temperature.

Kinetic multi-layer model of film formation, growth, and chemistry (KM-FILM): Boundary layer processes, multi-layer adsorption, bulk diffusion, and heterogeneous reactions

Kinetic Monte Carlo Simulation of Thin Film Growth

Film swelling and contaminant adsorption at polymer coated surfaces: Insights from density functional theory

Multi-Scale Modeling of the Gas-Liquid Interface Based on Mathematical and Thermodynamic Approaches~!2009-11-08~!2010-03-22~!2010-05-17~!

Kinetic Monte Carlo Simulation of Film Morphologies at the Initial Stages

Multi-Scale Gas-Liquid Interfacial Model

Multiphysics Modeling of Surface Diffusion Coupled with Large Deformation in 3D Solids

Phase-field simulation of liquid-vapor equilibrium and evaporation of fluid mixtures

Study on Multi-scale Modeling of Gas-Liquid Interface and Microbubble Coalescence

Layer-by-layer growth, apparent instability, and mound coarsening in thin film deposition controlled by thermally activated surface diffusion

Partitioning of Airborne PAEs on Indoor Impermeable Surfaces: A Microscopic View of the Sorption Process.

Simulation of Abnormal Effect in Film Groeth Using KMC Method

Structural Effects in Partially-Wetting Thin Evaporating Liquid Films Near the Contact Line

Monolayer and Multilayer Compact Film Formations on Different Substrates by Physical Deposition

Molecular Aspects of Film Formation of Partially Cross-Linked Water-Borne Secondary Dispersions that Show Skin Formation upon Drying

From a thin film model for passive suspensions towards the description of osmotic biofilm spreading

Kinetics of Polymer Adsorption and Desorption in Capillary Flow

Film Growth and Surface Roughness with Fluctuating Covalent Bonds in Evaporating Aqueous Solution of Reactive Hydrophobic and Polar Groups: A Computer Simulation Model

Modelling consortium for chemistry of indoor environments (MOCCIE): integrating chemical processes from molecular to room scales

Evaporation with the formation of chains of liquid bridges

A three-phase model for biofilm formation on a porous solid surface