Abstract:The morphological characteristics of the gas-liquid interfaces receding through the gap with a sharp feature in a quasi-static fashion is investigated in this paper. A series of quasi-static experiments have been performed. A theoretical model that tracks the movement of the gas-liquid interface is developed. Different from previous models, our model is developed on the mesoscopic scale and the pressure difference at every point on the interface is different because the effect of gravity cannot be ignored. A method to solve numerically the model under specific boundary conditions is proposed. The numerical result is experimentally verified, and good agreement is found between predicted and experimental behaviors of the gas-liquid interface. Through this model, the following analysis is carried out. Firstly, threshold of the model application was determined. Then, numerical results of residual liquid were obtained. It is concluded that the critical curve that determines whether liquid remains or not is independent of the receding contact angle when the gap is small (below 0.5 mm), while it is related to the receding contact angle when the gap is large (above 0.5 mm). Finally, it was carried out to understand the evolution of pressure difference and determine the maximum pressure difference. It is found that the maximum pressure difference appears at the first corner of the feature. The maximum pressure difference decreases with the increase of the gap height and decreases with the increase of the receding contact angle. This allows us to effectively design and optimize the removal structure in the immersion head. This model not only applies to the rectangular feature in this paper, but also to arbitrary features, and even to track advancing the gas-liquid interface using the advancing contact angle.

Study on Multi-scale Modeling of Gas-Liquid Interface and Microbubble Coalescence

Fundamental Numerical Simulation of Microbubble Interaction Using Multi-scale Multiphase Flow Equation

Multi-Scale Modeling of the Gas-Liquid Interface Based on Mathematical and Thermodynamic Approaches~!2009-11-08~!2010-03-22~!2010-05-17~!

Multi-Scale Gas-Liquid Interfacial Model

Trial 2D Simulation of Microbubble Interaction Based on Multi-Scale Multiphase Flow Equation(Fluids Engineering)

Fundamental Study of Microbubble Coalescences Based on Multi-Scale Multiphase Flow Equations(Fluids Engineering)

Modelling of microbubble coalescence

Discussion on Thermodynamic Jump Condition at Gas-Liquid Interface

Analytical Consideration of Thermodynamic Jump Condition

Electrically charged interfacial interaction based on thermodynamic jump condition

Mesoscopic Modelling Of Microbubble In Liquid With Finite Density Ratio Of Gas To Liquid

Morphological Characteristics of Gas-Liquid Interfaces Receding Through the Mesoscopic Gap with a Sharp Feature

Numerical Study on Mass Transfer of a Vapor Bubble Rising in Very High Viscous Fluid

Examination of Appropriate Formulations for Velocity and Pressure Calculation Methods at Interfacial Region on Collocated Physical Variables' Distribution

558 A study on numerical bubble-interaction model in micro-bubbly flows

Appropriate Formulations for Velocity and Pressure Calculations at Gas-liquid Interface with Collocated Variable Arrangement

Dynamics of Bubble Formation in Highly Viscous Liquid in Co-Flowing Microfluidic Device

Two-phase flow and morphology of the gas–liquid interface for bubbles or droplets in different microchannels

Modeling Bubble Collisions at Liquid?Liquid and Compound Interfaces

Coalescence Dynamics of Mobile and Immobile Fluid Interfaces.

A unified two-scale gas-liquid multi-fluid model with capillarity and interface regularization through a mass transfer between scales