Abstract:Concerning sustainability and recycling considerations, geopolymers have recently raised as one of the most active alternatives to the current cement-based composites, in addition to that, the existence of fibers in any binding matrix yields a significant improvement in the behavior of the matrix. On the other hand, using waste materials in the binding matrices fulfills one of the main aims of sustainability, namely reusing wastes. In this concern, the previous research attempts focused on the effect of using fibers and wastes separately and hence using them together in one matrix is not clearly highlighted. The main objective of this study was to examine the engineering properties of metakaolin-based geopolymer mortars in the case of colemanite substitution up to 30% and basalt fiber of different lengths. In the 10 series produced, firstly 7th day and 28th day compressive and flexural strengths, UPV, abrasion resistance test, porosity, unit weight, and water absorption results were examined. As the durability tests, 90 cycles of freezing-thawing between −20 and +20 °C, high-temperature tests of 250, 500 and 750 °C were applied. Also, geopolymer samples were exposed to 10% Hydrosulfuric Acid (H2SO4) for 3 months. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and Thermogravimetric/Differential Thermal Analysis (TGA-DTA) analyses were performed at the end of the durability tests. The results showed that in the case of 10% colemanite substitution, it increased the compressive strength results and lowered it at higher rates. With a colemanite substitution of 10%, the compressive strength results of 28 days increased by 1.71%, and in the case of 20% and 30% colemanite substitution, there was a decrease in the compressive strength of 13.64% and 26.99%, respectively. The compressive strength results showed that 24 mm long basalt fiber reinforced samples had better results than 12 mm long basalt fiber reinforced samples. It was seen that geopolymer specimens maintain stability in freezing-thawing, elevated temperatures, and sulfuric acid effects.

Mechanism, characterization and factors of reaction between basalt and alkali: Exploratory investigation for potential application in geopolymer concrete

Alkali activators with different cations transforming low-value volcanic ash into eco-friendly geopolymers

Effect of Na + alkaline activation on the geopolymerization of a pure metakaolin at room temperature

Self-compensating Geopolymer Utilizing Nano-Clay and Chopped Basalt Fibers

Study on the Compressive Strength and Reaction Mechanism of Alkali-Activated Geopolymer Materials Using Coal Gangue and Ground Granulated Blast Furnace Slag

Exploratory study for the alkaline activation of basalt powder as a supplementary cementitious matrix

Geopolymer concrete with metakaolin for sustainability: a comprehensive review on raw material’s properties, synthesis, performance, and potential application

Influence of GGBFS and silica fume on characteristics of alkali-activated Metakaolin-based concrete

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Parametrization of Geopolymer Compressive Strength Obtained from Metakaolin Properties

Investigation on the Microstructure and Mechanism of Geopolymer with Different Proportion of Quartz and K-feldspar

Impact of Alkaline Concentration on the Mechanical Properties of Geopolymer Concrete Made Up of Fly Ash and Sugarcane Bagasse Ash

Exploring the chemistry of metakaolin-based geopolymers

Effect of pore solution alkalinity on alkali–silica reaction (ASR) in metakaolin‐based geopolymer

Alkali-excited gel structure and compositions evolution in geopolymers synthesized from the spent FCC catalyst and steel slag

Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions

Alkali-hydrothermal activation of mine tailings to prepare one-part geopolymer: Activation mechanism, workability, strength, and hydration reaction

Physico-Mechanical Evaluation of Geopolymer Concrete Activated by Sodium Hydroxide and Silica Fume-Synthesised Sodium Silicate Solution

Effective function of activated bagasse ash for high early strength geopolymer

Evaluation of the 12–24 mm basalt fibers and boron waste on reinforced metakaolin-based geopolymer

The Effects of the Sequential Addition of Synthesis Parameters on the Performance of Alkali Activated Fly Ash Mortar