Abstract:Transverse mechanical properties of titanium matrix composites (TMCs) play an important role during its engineering service. Although SiCf / TC17 composite is one of the most promising TMC candidates for aeroengine, as we know its transverse properties have not been reported yet until now. In this work, the transverse strength of single SiC fiber reinforced TC17 composite was evaluated using cruciform specimen. The surface and cross-section of fractured specimen were investigated by SEM to determine the failure position during tensile test. Finite element simulation method was also used to analyze the mechanism of interfacial failure and crack propagation. During the transverse tensile test of single fiber specimen, the initial non-linearity in the stress-strain curve occurred at the stress of (271 +/- 12) MPa, which indicated the beginning of fiber-matrix interface failure. SEM observation showed that the crack in the center of sample appeared at the interface of reaction layer and carbon coating with a 24 degrees similar to 68 degrees angle to the applied loading direction and its length extended with the increase of the applied stress. The finite element simulation results based on bilinear cohesive element model showed that transverse fracture of composite interface was shear failure mode, which agreed well with the test results. Before the occurrence of non-linearity in the stress-strain curve, the crack initiated at the circular interface between reaction layer and carbon coating with a 40 degrees similar to 50 degrees angle to the applied loading direction. Crack initiation locations in test samples were different with those in simulation samples, because the actual composite interface was rough and some micro-flaws formed in the interface, whereas it was assumed to be an ideal rigid interface for simulation. Then the crack propagated along both circumferential and axial directions because of the shear stress. With the crack growing, the interface close to 0 degrees angle to the applied loading direction failed first caused by the radial tensile stress, whereas the interface near 90 degrees failed later as a result of circumferential shear stress. After complete failure of the interface, stress redistribution occurred around the SiC fiber and the interface separation increased with the increasing of the applied load, which gave rise to the yielding and deforming of the matrix near fiber until the final fracture of the composite.

Dataset on fractographic analysis of various SiC-based fibers

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

Study of SiC fiber axial compressive behavior using tensile recoil measurement

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

In-situ Tensile Damage and Fracture Behavior of PIP SiC/SiC Minicomposites at Room Temperature

An Experimental Study on the in Situ Strength of Sic Fibre in Unidirectional Sic/Al Composites

Interfacial Mechanical Properties of the Domestic 3rd Generation 2.5D SiCf/SiC Composite

The Analysis of Micro-Scale Deformation and Fracture of Carbonized Elastomer-Based Composites by In Situ SEM

Fragmentation Study of Interfacial Shear Strength of Single SiC Fiber Reinforced Al after Fatigue

The Properties of Dry-Spun Carbon Nanotube Fibers and Their Interfacial Shear Strength in an Epoxy Composite

In situ strength distribution of carbon fibers in unidirectional metal-matrix composites-wires

The Effective Interfacial Shear Strength of Carbon Nanotube Fibers in an Epoxy Matrix Characterized by a Microdroplet Test

Study on the folding damage mechanism of SiC fiber braided fabric based on synchrotron radiation CT and finite-element analysis

Research on Single SiC Fiber Reinforced TC17 CompositesUnder Transverse Tension

Strength of SCS-6 fibers in a Tiβ21s/SCS-6 composite before and after fatigue

Measurement and Evaluation of the Tensile Strength of CVD SiC Fibers with Carbon Coating

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

Micromechanical FE Analysis of SiCf/SiC Composite with BN Interface

In situ tomographic study of a 3D-woven SiC/SiC composite part subjected to severe thermo-mechanical loads

An Experimental Study on the Fracture of a Unidirectional Carbon Fiber-Reinforced Composite under Quasistatic Torsion

Fracture toughness and progressive damage mechanisms of 2.5D woven SiCf/SiC composites