HELP-based decision analysis applied to coronary artery disease.

R. Waki,P. Clayton,R. Jensen,F. Yanowitz,H. V. Liddle

DOI: https://doi.org/10.1016/0010-4809(82)90036-2

1982-04-01

Abstract:

What problem does this paper attempt to address?

A comprehensive investigation of Li-ion conductivity in lithium hydroxy halide antiperovskite solid electrolytes

Hyeon Jeong Lee,Brigita Darminto,Sudarshan Narayanan,Maria Diaz-Lopez,Albert Xiao,Yvonne Chart,Ji Hoon Lee,James Dawson,Mauro Pasta

DOI: https://doi.org/10.26434/chemrxiv-2021-4dnn0

2021-01-01

Abstract:Lithium hydroxide halide antiperovskite Li-ion conductors are ideal model systems for the systematic investigation of the effect of grain, grain boundary and interfacial resistance on the total Li-ion conductivity in solid-state batteries. Their low melting point (<300°C) empowers the use of melting and solidification to prepare pellets with high relative density without additional sintering steps and with control over grain size. The tunability of the halogen anion site enables control over grain conductivity and interfacial chemistry, with minimal structural perturbation. In this study, we conduct a comprehensive investigation of Li-ion conduction in Li2OHCl(1-x)Brx antiperovskites. We identify Li2OHCl0.9Br0.1 as the composition with the highest Li-ion conductivity of 2.52 E-3 mS/cm at room temperature. We highlight how the thermal expansion coefficient can serve as an indicator for the presence of structural defects hard to probe directly with X-ray techniques and essential in improving bulk Li-ion conduction. The detrimental effect of grain boundaries on ionic conductivity is demonstrated by atomistic calculations and validated experimentally by electrochemical impedance spectroscopy on pellets with controlled grain size. In-situ X-ray photoelectron spectroscopy experiments of Li2OHCl0.9Br0.1 demonstrate its chemical stability in contact with metallic lithium at room temperature. These insights provide design principles to improve Li-ion conductivity of lithium hydroxide halide antiperovskites.
Dynamics of Hydroxyl Anions Promotes Lithium Ion Conduction in Antiperovskite Li 2 OHCl

Fei Wang,Hayden A. Evans,Kwangnam Kim,Liang Yin,Yiliang Li,Ping-Chun Tsai,Jue Liu,Saul H. Lapidus,Craig M. Brown,Donald J. Siegel,Yet-Ming Chiang

DOI: https://doi.org/10.1021/acs.chemmater.0c02602

IF: 10.508

2020-09-01

Chemistry of Materials

Abstract:Li2OHCl is an exemplar of the antiperovskite family of ionic conductors, for which high ionic conductivities have been reported, but in which the atomic-level mechanism of ion migration is unclear. The stable phase is both crystallographically defective and disordered, having ∼1/3 of the Li sites vacant, while the presence of the OH– anion introduces the possibility of rotational disorder that may be coupled to cation migration. Here, complementary experimental and computational methods are applied to understand the relationship between the crystal chemistry and ionic conductivity in Li2OHCl, which undergoes an orthorhombic to cubic phase transition near 311 K (≈38 °C) and coincides with the more than a factor of 10 change in ionic conductivity (from 1.2 × 10–5mS/cm at 37 °C to 1.4 × 10–3 mS/cm at 39 °C). X-ray and neutron experiments conducted over the temperature range 20–200 °C, including diffraction, quasi-elastic neutron scattering (QENS), the maximum entropy method (MEM) analysis, and ab initio molecular dynamics (AIMD) simulations, together show conclusively that the high lithium ion conductivity of cubic Li2OHCl is correlated to "paddlewheel" rotation of the dynamic OH– anion. The present results suggest that in antiperovskites and derivative structures a high cation vacancy concentration combined with the presence of disordered molecular anions can lead to high cation mobility.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c02602?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c02602</a>.Temperature dependence of ionic conductivity and differential scanning calorimetry (DSC) analysis for Li2OHCl, Rietveld refinement of X-ray diffraction for Li2OHCl at 373 and 300 K zoomed in at a representative Q range, Rietveld refinement of neutron diffraction for Li2OHCl at 298 K acquired from POWGEN (ORNL), and X-ray pair distribution function (PDF) of Li2OHCl from 100 to 370 K (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02602/suppl_file/cm0c02602_si_001.pdf">PDF</a>)Movie S1 (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02602/suppl_file/cm0c02602_si_002.mp4">MP4</a>)Movie S2 (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02602/suppl_file/cm0c02602_si_003.mp4">MP4</a>)Movie S3 (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02602/suppl_file/cm0c02602_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical
How Halide Sub-Lattice Affects Li Ion Transport in Antiperovskites

Robert L Sacci,Tyler H Bennett,Kee Sung Han,Hong Fang,Puru Jena,Vijay Murugesan,Jagjit Nanda

DOI: https://doi.org/10.1149/ma2022-024467mtgabs

2022-11-24

ECS Meeting Abstracts

Abstract:Li-based antiperovskites (LiAP, Li 3-x OH x X, X = Cl, Br) are an emergent class of Li-ion conductors that are potential candidates for electrolytes in all-solid-state batteries. As a material class, pLiAP shows vast compositional design freedom; however, the resulting properties are susceptible to synthesis and processing methodologies. For example, proton incorporation and halide mixing stabilize the perovskite cubic phase near room temperature, and halides mixtures near the eutectic points drive the solid-state reaction temperature down, allowing for faster synthesis and processing conditions (< 1 h). The mixed halogen compositions, such as Li 2 OHCl 0.37 Br 0.63 , also show a 30-fold improvement in room temperature ionic conductivity of a single halide structure, 1.5 x 10 -6 vs. 4.9 x 10 -8 S cm -1 (Li 2 OHCl). Despite the growing interest in these materials, important questions remain about LiAPs on the structure-property correlation upon halide substitution and the correlations between the OH/halide dynamics and the Li-ion transport. We thus attempted to deconvolute how proton dynamics and halide substitution enhance or impede ionic conduction in pLiAP at compositions near the halide salts' eutectic points. We combined infrared spectroscopy and nuclear magnetic resonance (NMR) with first-principles density functional theory (DFT) calculations to deconvolute halide mixing effects from local proton dynamics on Li-ion transport. The NMR results and ab initio molecular dynamics suggest that Li + transport is more strongly correlated with halide dynamics. While the hydroxide does stabilize the highly conductive cubic structure, it limits correlative ionic transport and thus lowers Li + conductivity. Experiment design, data analysis, and manuscript preparation (RLS) were supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Science and Engineering. Synthesis (THB and JN) were supported by Asst. Secretary, Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (VTO) through the Advanced Battery Materials Research (BMR) Program. P. J. acknowledges partial support by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under Award DE-FG02-96ER45579. H. F. was supported from U.S. Department of Energy (Award No. DE-EE0008865). This research used resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The NMR characterization part of the work is supported by the Joint Center for Energy Storage Research (JCESR), an Energy Innovation Hub funded by the U.S. Department of Energy, Office of Science, and Basic Energy Sciences. The NMR work was performed at the W. R. Wiley Environmental Molecular Sciences Laboratory, a DOE User Facility sponsored by the Office of Biological and Environmental Research, located at Pacific Northwest National Laboratory. Figure 1
Ab Initio Study of the Stabilities of and Mechanism of Superionic Transport in Lithium-Rich Antiperovskites

Yi Zhang,Yusheng Zhao,Changfeng Chen

DOI: https://doi.org/10.1103/physrevb.87.134303

IF: 3.7

2013-01-01

Physical Review B

Abstract:Recently, a family of halogen-based Li-rich antiperovskites were synthesized [J. Am. Chem. Soc. 134, 15042 (2012)], and the measured superionic conductivity makes these materials promising candidates as solid electrolytes for applications in Li-ion and Li-air batteries. This discovery raises several pressing issues on the fundamental physics concerning the thermodynamic and electrochemical stability of the synthesized materials and the mechanism of the observed superionic Li+ transport. Here, we study the reported antiperovskites Li3OCl, Li3OBr, and their mixed compounds using first-principles density functional theory and molecular dynamics simulations. Our calculations show that these materials are thermodynamically metastable. Their large electronic band gaps and chemical stability against electrodes suggest the excellent electrochemical performance, which bodes well for the use in potentially harsh working conditions in practical battery applications. The calculated low activation enthalpy for Li-ion migration well below the crystal melting temperature and superionic transport near the Li sublattice melting state explain the experimentally observed phenomena. Our study identifies mobile Li vacancies and anion disorder as the primary driving mechanisms for superionic Li+ conductivity in the antiperovskites. This work unveils essential working principles of the Li-rich antiperovskites, which are crucial to further exploration, development, and application of these and other charge-inverted materials with tailored properties.
Computational insights into the ionic transport mechanism and interfacial stability of the Li2OHCl solid-state electrolyte

Bo Liu,Qianglin Hu,Tianyu Gao,Peiguang Liao,Yufeng Wen,Ziheng Lu,Jiong Yang,Siqi Shi,Wenqing Zhang

DOI: https://doi.org/10.1016/j.jmat.2021.05.006

IF: 8.589

2022-01-01

Journal of Materiomics

Abstract:Combining the first-principles calculation and AIMD simulation on the promising Li2OHCl solid electrolyte material.Li2OHCl presents a high interfacial stability and ionic conductivity for ASSLIBs.The modelling can be used to accelerate discovery of solid electrolyte materials.Lithium-rich antiperovskites are promising solid-state electrolytes for all-solid-state lithium-ion batteries because of their high structural tolerance and good formability. However, the experimentally reported proton-free Li3OCl is plagued by its inferior interfacial compatibility and harsh synthesis conditions. In contrast, Li2OHCl is a thermodynamically favored phases and is easier to achieve than Li3OCl. Due to the proton inside this material, it exhibits interesting lithium diffusion mechanisms. Herein, we present a systematic investigation of the ionic transport, phase stability, and electrochemical-chemical stability of Li2OHCl using first-principles calculations. Our results indicate that Li2OHCl is thermodynamically metastable and is an electronic insulator. The wide electrochemical stability window and high chemical stability of Li2OHCl against various electrodes are confirmed. The charged defects are the dominant conduction mechanism for Li-transport, with a low energy barrier of ∼0.50 eV. The Li-ion conductivity estimated by ab initio molecular dynamics simulations is about 1.3×10-4 S cm-1 at room temperature. This work identifies the origin of the high interfacial stability and ionic conductivity of Li2OHCl, which can further lead to the design of such as a cathode coating. Moreover, all computational methods for calculating the properties of Li2OHCl are general and can guide the design of high-performance solid-state electrolytes.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2352847821000903-ga1_lrg.jpg">Download : Download high-res image (265KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2352847821000903-ga1.jpg">Download : Download full-size image</a></li></ol>

materials science, multidisciplinary,chemistry, physical,physics, applied
Effects of Fluorination on Crystal Structure and Electrochemical Performance of Antiperovskite Solid Electrolytes

Lei Gao,Manrong Song,Ruo Zhao,Songbai Han,Jinlong Zhu,Wei Xia,Juncao Bian,Liping Wang,Song Gao,Yonggang Wang,Ruqiang Zou,Yusheng Zhao

DOI: https://doi.org/10.1016/j.jechem.2022.11.018

IF: 13.1

2022-01-01

Journal of Energy Chemistry

Abstract:The development of all-solid-state lithium batteries (ASSLBs) depends on exploiting solid-state elec-trolytes (SSEs) with high ionic conductivity and electrochemical stability. Fluorination is generally con-sidered to be an effective strategy to improve the ionic conductivity and electrochemical stability of inorganic SSEs. Here, we report the partial fluorination of the chlorine sites in an antiperovskite, by which the orthorhombic Li2OHCl was transformed into cubic Li2OHCl0.9F0.1, resulting in a fourfold increase in ionic conductivity at 30 degrees C. The ab initio molecular dynamics simulations suggest that both the crystal symmetry and the anions electronegativity influence the diffusion of Li+ in the antiperovskite structure. Besides, from the perspective of experiments and calculations, it is confirmed that fluorination is a fea-sible method to improve the electrochemical stability of antiperovskite SSEs. The LiFePO4 | Li cell based on Li2OHCl0.9F0.1 is also assembled and exhibits stable cycle performance, which indicates that fluorina-tion of antiperovskite SSEs is an effective way to produce high-performance SSEs for practical application of ASSLBs.(c) 2022 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Zengcai Liu,Wujun Fu,E. Andrew Payzant,Xiang Yu,Zili Wu,Nancy J. Dudney,Jim Kiggans,Kunlun Hong,Adam J. Rondinone,Chengdu Liang

DOI: https://doi.org/10.1021/ja3110895

IF: 15

2013-01-01

Journal of the American Chemical Society

Abstract:Lithium-ion-conducting solid electrolytes hold promise for enabling high-energy battery chemistries and circumventing safety issues of conventional lithium batteries. Achieving the combination of high ionic conductivity and a broad electrochemical window in solid electrolytes is a grand challenge for the synthesis of battery materials. Herein we show an enhancement of the room-temperature lithium-ion conductivity by 3 orders of magnitude through the creation of nanostructured Li(3)PS(4). This material has a wide electrochemical window (5 V) and superior chemical stability against lithium metal. The nanoporous structure of Li(3)PS(4) reconciles two vital effects that enhance the ionic conductivity: (1) the reduction of the dimensions to a nanometer-sized framework stabilizes the high-conduction β phase that occurs at elevated temperatures, and (2) the high surface-to-bulk ratio of nanoporous β-Li(3)PS(4) promotes surface conduction. Manipulating the ionic conductivity of solid electrolytes has far-reaching implications for materials design and synthesis in a broad range of applications, including batteries, fuel cells, sensors, photovoltaic systems, and so forth.
Strain engineering of antiperovskite materials for solid-state Li batteries: a computation-guided substitution approach

Longyun Shen,Yuhao Wang,Jing Yu,Guodong Zhou,Jiapeng Liu,Matthew J. Robson,Yanguang Zhou,Mohammed B. Effat,Francesco Ciucci,Matthew Robson

DOI: https://doi.org/10.1039/d3ta03543c

IF: 11.9

2023-08-24

Journal of Materials Chemistry A

Abstract:Li 2 OHCl is a promising solid-state electrolyte (SSE) for all-solid-state Li-ion batteries thanks to its simple synthesis and low precursor costs. However, its low ionic conductivity is a challenge for its use in devices. This study employs density functional theory (DFT) calculations to investigate the effect of strain on Li + transport, showing that the migration energy barrier decreases if tensile strain is applied. In practice, such strain can be obtained by isovalent doping, i.e. , by substituting Cl with larger I and Br atoms. Further DFT calculations and experiments show that tensile strain not only enhances conductivity but also stabilizes the highly conductive cubic phase at room temperature. An optimized composition ( i.e. , Li 2 OHCl 0.921 I 0.079 ) reaches an ionic conductivity of 0.50 mS cm −1 at 373 K, which is five times larger than that of Li 2 OHCl at the same temperature. Furthermore, a Li/Li 2 OHCl 0.921 I 0.079 /Li symmetric cell can cycle for more than 800 h, and a Li/Li 2 OHCl 0.921 I 0.079 /LiFePO 4 battery achieves 50% capacity retention after 274 cycles with significantly enhanced performance compared to Li 2 OHCl. These findings highlight the potential of strain engineering to enhance the conductivity of SSEs and motivate further research on designing fast ion conductors.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Exploring superionic conduction in lithium oxyhalide solid electrolytes considering composition and structural factors

Fiaz Hussain,Jinlong Zhu,Yusheng Zhao,Wei Xia

DOI: https://doi.org/10.1038/s41524-024-01346-y

IF: 12.256

2024-07-15

npj Computational Materials

Abstract:Lithium (Li) oxyhalides have emerged as promising solid electrolyte candidates for all-solid-state batteries (ASSBs) due to their superior ionic conductivity and excellent cathode capability. However, the mechanism of Li transport in oxyhalides has remained unclear due to the complex nature of these compounds, which often comprise multiple phases such as crystalline and amorphous structures. Herein, a first-principles study using density functional theory and ab initio molecular dynamic simulation is performed to gain a theoretical insight into the structural behavior and conduction pathway in oxyhalide electrolytes. Li 2.5 ZrCl 5.5 O 0.5 electrolyte, as a case of study, is comprehensively investigated by considering various phases. It's revealed that the phase is energetically more stable and exhibits one order of magnitude higher Li conductivity compared to the C2/m phase among potential crystalline phases (1.63 mS cm −1 versus 0.24 mS cm −1 at room temperature). Interestingly, an amorphous phase with even higher ionic conductivity (~40 mS cm −1 ) can be generated by creating LiCl-deficient Li-Zr-O-Cl compounds. The remarkably high ionic conductivity suggests that the amorphous structure is likely the dominant conducting pathway, facilitating fast Li transport due the weak bonding between Li and other atoms. Cl anion mobility is also observed in the amorphous phase through mean square displacement (MSD) calculation, although further analyses revealed this to be localized vibration. This study sheds light on the nature of oxychloride structures and promotes a deeper understanding of the superionic conduction mechanism in oxychlorides, which will contribute to the development of advanced solid electrolytes and ASSBs.

materials science, multidisciplinary,chemistry, physical
Thermodynamic stability and diffusion mechanism of LiMXCl4 superionic conductors

KyuJung Jun,Grace Wei,Gerbrand Ceder

DOI: https://doi.org/10.26434/chemrxiv-2024-nm8ks

2024-08-12

Abstract:LiMXCl4 is a recently discovered lithium superionic conductor reported with a Li conductivity up to 12.4 mS/cm at room temperature. In this work, we explore various types of M-cation and X-anion substitutions in the LiMXCl4 system. We find that fluoro-chlorides may provide promising thermodynamic and electrochemical stability without compromising ionic conductivity. Ab-initio molecular dynamics simulations on seven substitutions and three lithium concentrations for each substitution suggest that even higher conductivity may be achieved in LiMXCl4 than has been reported. A Meyer-Neldel analysis comparing LiMXCl4, close-packed halides, and LaCl3-type systems demonstrates the potential of the LiMXCl4 family due to their high Meyer-Neldel energy, high prefactor, and low activation energy, projecting a range of conductivity of 10-100 mS/cm. An analysis of the correlation between lithium-ion hops and small-angle tilting events finds that LiMXCl4 systems exhibit a strong cradle effect where weakly bound M-octahedra often tilt their orientation in conjunction with a nearby Li-ion hop to flatten the lithium-ion energy landscape. Such an advantage originates from the fact that in the LiMXCl4 structure, one-dimensional M-octahedral chains are bound via weak van der Waals interactions which can accommodate for reduction in free volume via rotational correlation of the octahedra. Our work demonstrates an exciting direction towards further improving this class of materials in terms of ionic conductivity and electrochemical stability and provides a fundamental understanding of the factors that lead to high ionic conductivity in non-close-packed oxyhalide systems.

Chemistry
Fluorine-Doped Antiperovskite Electrolyte for All-Solid-State Lithium-Ion Batteries

Yutao Li,Weidong Zhou,Sen Xin,Shuai Li,Jinlong Zhu,Xujie Lü,Zhiming Cui,Quanxi Jia,Jianshi Zhou,Yusheng Zhao,John B. Goodenough

DOI: https://doi.org/10.1002/anie.201604554

2016-01-01

Abstract:A fluorine-doped antiperovskite Li-ion conductor Li-2(OH)X (X=Cl, Br) is shown to be a promising candidate for a solid electrolyte in an all-solid-state Li-ion rechargeable battery. Substitution of F- for OH- transforms orthorhombic Li2OHCl to a room-temperature cubic phase, which shows electrochemical stability to 9 V versus Li+/Li and two orders of magnitude higher Li-ion conductivity than that of orthorhombic Li2OHCl. An all-solid-state Li/LiFePO4 with F-doped Li2OHCl as the solid electrolyte showed good cyclability and a high coulombic efficiency over 40 charge/discharge cycles.
Local Structural Changes and Inductive Effects on Ion Conduction in Antiperovskite Solid Electrolytes

Zhi Deng,Mingyang Ou,Jing Wan,Shuai Li,Yuyu Li,Yuanpeng Zhang,Zhe Deng,Jia Xu,Yuegang Qiu,Yi Liu,Chun Fang,Qing Li,Li Huang,Jinlong Zhu,Songbai Han,Jiantao Han,Yusheng Zhao

DOI: https://doi.org/10.1021/acs.chemmater.0c02173

IF: 10.508

2020-10-14

Chemistry of Materials

Abstract:Solid-state electrolytes (SSEs) with high ionic conductivities are the key components in solid-state batteries, and the ionic conductivities of SSEs are strongly related to their underlying crystal structures. However, the current structural descriptions mainly focus on static average structure, with certain limitations due to an incomplete understanding of the ionic conduction mechanism in solid electrolytes. Herein, a relationship between ionic transport and local lattice dynamics at an atomic scale is presented. The local structural changes by altering the fractional occupancy of the halide anions in antiperovskite Li2OHX (Cl, Br) are investigated using atomic pair distribution function (PDF), and the corresponding Li+ transport behaviors are obtained by electrochemical impedance spectroscopy (EIS). The increased lattice polarization and distortion are observed to decrease both activation barriers and Arrhenius prefactor upon changing the Br contents. It indicates that the synergistic effects of local structural changes on the activation barrier and Arrhenius prefactor both should be considered for promoting ionic transport. The investigation shows an in-depth understanding of ion conduction in solid electrolytes and delivers a new insight for developing new ionic conductors.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c02173?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c02173</a>.All structural data of XRD and PDF (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02173/suppl_file/cm0c02173_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical
Amorphous AlOCl Compounds Enabling Nanocrystalline LiCl with Abnormally High Ionic Conductivity

Hui Duan,Changhong Wang,Xu-Sheng Zhang,Jiamin Fu,Weihan Li,Jing Wan,Ruizhi Yu,Min Fan,Fucheng Ren,Shuo Wang,Matthew Zheng,Xiaona Li,Jianwen Liang,Rui Wen,Sen Xin,Yu-Guo Guo,Xueliang Sun

DOI: https://doi.org/10.1021/jacs.4c06498

IF: 15

2024-10-20

Journal of the American Chemical Society

Abstract:LiCl is a promising solid electrolyte, providing it possesses high ionic conductivity. Numerous efforts have been made to enhance its ionic conductivity through aliovalent doping. However, aliovalent substitution changes the intrinsic structure of LiCl, compromising its cost-effectiveness and electrochemical stability. Here, we report nanocrystalline LiCl embedded in amorphous AlOCl compounds with a heterogeneous structure to enhance its ionic conductivity. Nanocrystallization enlarges the LiCl...

chemistry, multidisciplinary
Environmental lead toxicity and nutritional factors.

M. Ahamed,M. Siddiqui

DOI: https://doi.org/10.1016/J.CLNU.2007.03.010

IF: 7.643

2007-08-01

Clinical Nutrition

Abstract:
Influence of Structural Distortion and Lattice Dynamics on Li-Ion Diffusion in Li 3 OCl 1– x Br x Superionic Conductors

Ronghan Chen,Zhenming Xu,Yuechuan Lin,Buyao Lv,Shou-Hang Bo,Hong Zhu

DOI: https://doi.org/10.1021/acsaem.0c02519

IF: 6.4

2021-02-15

ACS Applied Energy Materials

Abstract:The antiperovskite superionic conductors Li3OCl and Li3OBr show great differences in ionic conductivity. The more polarizable Li3OBr shows a lower ionic conductivity than Li3OCl, contradicting the idea that a more polarizable framework is beneficial for ionic conduction. In this work, we study the influence of substituting Cl with Br on the local structure, lattice dynamics, and Li-ion conductivity of Li3OCl1–xBrx, based on first-principles calculations. We find that the incorporation of Br does soften the overall lattice stiffness of Li3OCl1–xBrx, but the accompanying local structural distortion plays a dominant role in changing the activation energy for Li-ion diffusion, which could increase the site energy as well as the Li-ion vibration frequency. We suggest that more distorted initial octahedral sites and less distorted saddle trigonal-plane sites can lead to better ionic transport. In addition, the correlation between activation energy and the pre-exponential factor of diffusivity extracted from the Arrhenius plot of Li3OCl1–xBrx is found to be nonlinear, which is due to the decreasing migration entropy with increasing activation energy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02519?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02519</a>.Structural information, NEB results and values of site distortion, phonon DOS, MSD, the correlation between prefactor D0 and activation energy, and generality of the correlation between activation energy and CSM regardless of halide disorder (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02519/suppl_file/ae0c02519_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Superhalogen-based lithium superionic conductors

Hong Fang,Shuo Wang,Junyi Liu,Qiang Sun,Puru Jena

DOI: https://doi.org/10.1039/c7ta01648d

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:The development of cheap, durable, and safe inorganic solid electrolytes with superionic conductivity is the key for the next generation of all-solid metal-ion batteries. The recent discovery of antiperovskites with composition Li(3)OA (A = halogen) shows promise in this regard. Here, we demonstrate the potential of a new class of antiperovskites where halogens are replaced by BH4 superhalogens. In addition to maintaining the high ionic conductivity of Li(3)OA, Li3O(BH4) is lightweight, mechanically flexible, thermodynamically more stable, and electronically more insulating than Li(3)OA. By mixing BH4 with Cl to make Li3O(BH4)(0.5)Cl-0.5, we further show that the conductivity will be doubled. The Li+-ion conductivity of the new materials is of the order of 10(-4) to over 10(-3) S cm(-1) at room temperature and will be well above 10(-2) S cm(-1) at higher temperatures below the melting point. The conduction mechanism of the material is revealed by identifying the relationship between the orientational symmetry of the BH4- rotors and the potential surface felt by the lithium ions.
Boosting lithium ion conductivity of antiperovskite solid electrolyte by potassium ions substitution for cation clusters

Lei Gao,Xinyu Zhang,Jinlong Zhu,Songbai Han,Hao Zhang,Liping Wang,Ruo Zhao,Song Gao,Shuai Li,Yonggang Wang,Dubin Huang,Yusheng Zhao,Ruqiang Zou

DOI: https://doi.org/10.1038/s41467-023-42385-1

IF: 16.6

2023-10-26

Nature Communications

Abstract:Abstract Solid-state electrolytes with high ionic conductivities are crucial for the development of all-solid-state lithium batteries, and there is a strong correlation between the ionic conductivities and underlying lattice structures of solid-state electrolytes. Here, we report a lattice manipulation method of replacing [Li 2 OH] + clusters with potassium ions in antiperovskite solid-state electrolyte (Li 2 OH) 0.99 K 0.01 Cl, which leads to a remarkable increase in ionic conductivity (4.5 × 10 ‒3 mS cm ‒1 , 25 °C). Mechanistic analysis indicates that the lattice manipulation method leads to the stabilization of the cubic phase and lattice contraction for the antiperovskite, and causes significant changes in Li-ion transport trajectories and migration barriers. Also, the Li||LiFePO 4 all-solid-state battery (excess Li and loading of 1.78 mg cm ‒2 for LiFePO 4 ) employing (Li 2 OH) 0.99 K 0.01 Cl electrolyte delivers a specific capacity of 116.4 mAh g ‒1 at the 150th cycle with a capacity retention of 96.1% at 80 mA g ‒1 and 120 °C, which indicates potential application prospects of antiperovskite electrolyte in all-solid-state lithium batteries.

multidisciplinary sciences
Configurational and Dynamical Heterogeneity in Superionic Li5.3PS4.3Cl1.7−xBrx

Pengbo Wang,Sawankumar Patel,Haoyu Liu,Po‐Hsiu Chien,Xuyong Feng,Lina Gao,Benjamin Chen,Jue Liu,Yan‐Yan Hu

DOI: https://doi.org/10.1002/adfm.202307954

IF: 19

2023-09-01

Advanced Functional Materials

Abstract:This study explores Li+ conductors in the argyrodite family, uncovering how anion lattice chemistry affects cation migration. The results reveal anion sublattices of high chemical and structural disorder enhance PS43− re‐orientation, leading to fast Li+‐ion conduction with low activation energy barriers via correlated Li+‐PS43− motion. The correlation between lattice chemistry and cation migration in high‐entropy Li+ conductors is not fully understood due to challenges in characterizing anion disorder. To address this issue, argyrodite family of Li+ conductors, which enables structural engineering of the anion lattice, is investigated. Specifically, new argyrodites, Li5.3PS4.3Cl1.7−xBrx (0 ≤ x ≤ 1.7), with varying anion entropy are synthesized and X‐ray diffraction, neutron scattering, and multinuclear high‐resolution solid‐state nuclear magnetic resonance (NMR) are used to determine the resulting structures. Ion and lattice dynamics are determined using variable‐temperature multinuclear NMR relaxometry and maximum entropy method analysis of neutron scattering, aided by constrained ab initio molecular dynamics calculations. 15 atomic configurations of anion arrangements are identified, producing a wide range of local lattice dynamics. High entropy in the lattice structure, composition, and dynamics stabilize otherwise metastable Li‐deficient structures and flatten the energy landscape for cation migration. This resulted in the highest room‐temperature ionic conductivity of 26 mS cm−1 and a low activation energy of 0.155 eV realized in Li5.3PS4.3Cl0.7Br, where anion disorder is maximized. This study sheds light on the complex structure–property relationships of high‐entropy superionic conductors, highlighting the significance of heterogeneity in lattice dynamics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Tunable Lithium-Ion Transport in Mixed-Halide Argyrodites Li 6– x PS 5– x ClBr x : An Unusual Compositional Space

Sawankumar V. Patel,Swastika Banerjee,Haoyu Liu,Pengbo Wang,Po-Hsiu Chien,Xuyong Feng,Jue Liu,Shyue Ping Ong,Yan-Yan Hu

DOI: https://doi.org/10.1021/acs.chemmater.0c04650

IF: 10.508

2021-02-03

Chemistry of Materials

Abstract:Argyrodites, with fast lithium-ion conduction, are promising for applications in rechargeable solid-state lithium-ion batteries. We report a new compositional space of argyrodite superionic conductors, Li6–x PS5–x ClBr x [0 ≤ x ≤ 0.8], with a remarkably high ionic conductivity of 24 mS/cm at 25 °C for Li5.3PS4.3ClBr0.7. In addition, the extremely low lithium migration barrier of 0.155 eV makes Li5.3PS4.3ClBr0.7 highly promising for low-temperature operation. Average and local structure analyses reveal that bromination (x > 0) leads to (i) retention of the parent Li6PS5Cl structure for a wide range of x in Li6–x PS5–x ClBr x (0 ≤ x ≤ 0.7), (ii) co-occupancy of Cl–, Br–, and S2– at 4a/4d sites, and (iii) gradually increased Li+-ion dynamics, eventually yielding a “liquid-like” Li-sublattice with a flattened energy landscape when x approaches 0.7. In addition, the diversity of anion species and Li-deficiency in halogen-rich Li6–x PS5–x ClBr x induce hypercoordination and coordination entropy for the Li-sublattice, also leading to enhanced Li+-ion transport in Li6–x PS5–x ClBr x . This study demonstrates that mixed-anion framework can help stabilize highly conductive structures in a compositional space otherwise unstable with lower anion diversity.

materials science, multidisciplinary,chemistry, physical
Fluorine-Like BH 4 -Doped Li 6 PS 5 Cl with Improved Ionic Conductivity and Electrochemical Stability

Lulin Liu,Heng Wang,Daixin Ye,Hongbin Zhao,Jiujun Zhang,Ya Tang

DOI: https://doi.org/10.1021/acsami.4c05403

IF: 9.5

2024-06-11

ACS Applied Materials & Interfaces

Abstract:Sulfide-based solid electrolytes with high ionic conductivity have attracted a lot of attention. However, the incompatibility and interfacial instability of sulfides with the lithium metal anode have emerged as pivotal constraints on their development. To address this challenge, we proposed and successfully synthesized the BH(4)^(-) doped argyrodite-type electrolyte Li(6)PS(5)Cl(0.9)(BH(4))(0.1) by mechanical ball milling and annealing. This electrolyte not only exhibits an exceptionally high...

materials science, multidisciplinary,nanoscience & nanotechnology

HELP-based decision analysis applied to coronary artery disease.

A comprehensive investigation of Li-ion conductivity in lithium hydroxy halide antiperovskite solid electrolytes

Dynamics of Hydroxyl Anions Promotes Lithium Ion Conduction in Antiperovskite Li 2 OHCl

How Halide Sub-Lattice Affects Li Ion Transport in Antiperovskites

Ab Initio Study of the Stabilities of and Mechanism of Superionic Transport in Lithium-Rich Antiperovskites

Computational insights into the ionic transport mechanism and interfacial stability of the Li2OHCl solid-state electrolyte

Effects of Fluorination on Crystal Structure and Electrochemical Performance of Antiperovskite Solid Electrolytes

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Strain engineering of antiperovskite materials for solid-state Li batteries: a computation-guided substitution approach

Exploring superionic conduction in lithium oxyhalide solid electrolytes considering composition and structural factors

Thermodynamic stability and diffusion mechanism of LiMXCl4 superionic conductors

Fluorine-Doped Antiperovskite Electrolyte for All-Solid-State Lithium-Ion Batteries

Local Structural Changes and Inductive Effects on Ion Conduction in Antiperovskite Solid Electrolytes

Amorphous AlOCl Compounds Enabling Nanocrystalline LiCl with Abnormally High Ionic Conductivity

Environmental lead toxicity and nutritional factors.

Influence of Structural Distortion and Lattice Dynamics on Li-Ion Diffusion in Li 3 OCl 1– x Br x Superionic Conductors

Superhalogen-based lithium superionic conductors

Boosting lithium ion conductivity of antiperovskite solid electrolyte by potassium ions substitution for cation clusters

Configurational and Dynamical Heterogeneity in Superionic Li5.3PS4.3Cl1.7−xBrx

Tunable Lithium-Ion Transport in Mixed-Halide Argyrodites Li 6– x PS 5– x ClBr x : An Unusual Compositional Space

Fluorine-Like BH 4 -Doped Li 6 PS 5 Cl with Improved Ionic Conductivity and Electrochemical Stability