Environmental lead toxicity and nutritional factors.

M. Ahamed,M. Siddiqui

DOI: https://doi.org/10.1016/J.CLNU.2007.03.010

IF: 7.643

2007-08-01

Clinical Nutrition

Abstract:

What problem does this paper attempt to address?

A comprehensive investigation of Li-ion conductivity in lithium hydroxy halide antiperovskite solid electrolytes

Hyeon Jeong Lee,Brigita Darminto,Sudarshan Narayanan,Maria Diaz-Lopez,Albert Xiao,Yvonne Chart,Ji Hoon Lee,James Dawson,Mauro Pasta

DOI: https://doi.org/10.26434/chemrxiv-2021-4dnn0

2021-01-01

Abstract:Lithium hydroxide halide antiperovskite Li-ion conductors are ideal model systems for the systematic investigation of the effect of grain, grain boundary and interfacial resistance on the total Li-ion conductivity in solid-state batteries. Their low melting point (<300°C) empowers the use of melting and solidification to prepare pellets with high relative density without additional sintering steps and with control over grain size. The tunability of the halogen anion site enables control over grain conductivity and interfacial chemistry, with minimal structural perturbation. In this study, we conduct a comprehensive investigation of Li-ion conduction in Li2OHCl(1-x)Brx antiperovskites. We identify Li2OHCl0.9Br0.1 as the composition with the highest Li-ion conductivity of 2.52 E-3 mS/cm at room temperature. We highlight how the thermal expansion coefficient can serve as an indicator for the presence of structural defects hard to probe directly with X-ray techniques and essential in improving bulk Li-ion conduction. The detrimental effect of grain boundaries on ionic conductivity is demonstrated by atomistic calculations and validated experimentally by electrochemical impedance spectroscopy on pellets with controlled grain size. In-situ X-ray photoelectron spectroscopy experiments of Li2OHCl0.9Br0.1 demonstrate its chemical stability in contact with metallic lithium at room temperature. These insights provide design principles to improve Li-ion conductivity of lithium hydroxide halide antiperovskites.
On the Local Charge Inhomogeneity and Lithium Distribution in the Superionic Argyrodites Li6PS5X (X = Cl, Br, I)

Nicolo Minafra,Marvin Kraft,Tim Bernges,Cheng Li,Roman Schlem,Benjamin Morgan,Wolfgang Zeier

DOI: https://doi.org/10.26434/chemrxiv.12360722.v1

2020-05-26

Abstract:The lithium-argyrodites Li 6 PS 5 X ( X = Cl, Br, I) exhibit high lithium-ion conductivities, making them promising candidates for use in solid-state batteries. These solid electrolytes can show considerable substitutional X − /S 2− anion-disorder, with greater disorder typically correlated with higher lithium-ion conductivities. The atomic-scale effects of this anion site-disorder within the host lattice—in particular how lattice disorder modulates the lithium substructure—are not well understood. Here, we characterize the lithium substructure in Li 6 PS 5 X ( X = Cl, Br, I) as a function of temperature and anion site-disorder, using Rietveld refinements against temperature-dependent neutron diffraction data. Analysis of these high-resolution diffraction data reveals an additional lithium position previously unreported for Li 6 PS 5 X argyrodites, suggesting that the lithium conduction pathway in these materials differs from the most common model proposed in earlier studies. Analysis of the Li + positions and their radial distributions reveals that greater inhomogeneityof the local anionic charge, due to X − /S 2− site-disorder, is associated with more spatially-diffuse lithium distributions. This observed coupling of site-disorder and lithium distribution provides a possible explanation for the enhanced lithium transport in anion-disordered lithium argyrodites, and highlights the complex interplay between anion configuration and lithium substructure in this family of superionic conductors.
Tunable Lithium-Ion Transport in Mixed-Halide Argyrodites Li 6– x PS 5– x ClBr x : An Unusual Compositional Space

Sawankumar V. Patel,Swastika Banerjee,Haoyu Liu,Pengbo Wang,Po-Hsiu Chien,Xuyong Feng,Jue Liu,Shyue Ping Ong,Yan-Yan Hu

DOI: https://doi.org/10.1021/acs.chemmater.0c04650

IF: 10.508

2021-02-03

Chemistry of Materials

Abstract:Argyrodites, with fast lithium-ion conduction, are promising for applications in rechargeable solid-state lithium-ion batteries. We report a new compositional space of argyrodite superionic conductors, Li6–x PS5–x ClBr x [0 ≤ x ≤ 0.8], with a remarkably high ionic conductivity of 24 mS/cm at 25 °C for Li5.3PS4.3ClBr0.7. In addition, the extremely low lithium migration barrier of 0.155 eV makes Li5.3PS4.3ClBr0.7 highly promising for low-temperature operation. Average and local structure analyses reveal that bromination (x > 0) leads to (i) retention of the parent Li6PS5Cl structure for a wide range of x in Li6–x PS5–x ClBr x (0 ≤ x ≤ 0.7), (ii) co-occupancy of Cl–, Br–, and S2– at 4a/4d sites, and (iii) gradually increased Li+-ion dynamics, eventually yielding a “liquid-like” Li-sublattice with a flattened energy landscape when x approaches 0.7. In addition, the diversity of anion species and Li-deficiency in halogen-rich Li6–x PS5–x ClBr x induce hypercoordination and coordination entropy for the Li-sublattice, also leading to enhanced Li+-ion transport in Li6–x PS5–x ClBr x . This study demonstrates that mixed-anion framework can help stabilize highly conductive structures in a compositional space otherwise unstable with lower anion diversity.

materials science, multidisciplinary,chemistry, physical
Configurational and Dynamical Heterogeneity in Superionic Li5.3PS4.3Cl1.7−xBrx

Pengbo Wang,Sawankumar Patel,Haoyu Liu,Po‐Hsiu Chien,Xuyong Feng,Lina Gao,Benjamin Chen,Jue Liu,Yan‐Yan Hu

DOI: https://doi.org/10.1002/adfm.202307954

IF: 19

2023-09-01

Advanced Functional Materials

Abstract:This study explores Li+ conductors in the argyrodite family, uncovering how anion lattice chemistry affects cation migration. The results reveal anion sublattices of high chemical and structural disorder enhance PS43− re‐orientation, leading to fast Li+‐ion conduction with low activation energy barriers via correlated Li+‐PS43− motion. The correlation between lattice chemistry and cation migration in high‐entropy Li+ conductors is not fully understood due to challenges in characterizing anion disorder. To address this issue, argyrodite family of Li+ conductors, which enables structural engineering of the anion lattice, is investigated. Specifically, new argyrodites, Li5.3PS4.3Cl1.7−xBrx (0 ≤ x ≤ 1.7), with varying anion entropy are synthesized and X‐ray diffraction, neutron scattering, and multinuclear high‐resolution solid‐state nuclear magnetic resonance (NMR) are used to determine the resulting structures. Ion and lattice dynamics are determined using variable‐temperature multinuclear NMR relaxometry and maximum entropy method analysis of neutron scattering, aided by constrained ab initio molecular dynamics calculations. 15 atomic configurations of anion arrangements are identified, producing a wide range of local lattice dynamics. High entropy in the lattice structure, composition, and dynamics stabilize otherwise metastable Li‐deficient structures and flatten the energy landscape for cation migration. This resulted in the highest room‐temperature ionic conductivity of 26 mS cm−1 and a low activation energy of 0.155 eV realized in Li5.3PS4.3Cl0.7Br, where anion disorder is maximized. This study sheds light on the complex structure–property relationships of high‐entropy superionic conductors, highlighting the significance of heterogeneity in lattice dynamics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Optimizing ionic transport in argyrodites: a unified view on the role of sulfur/halide distribution and local environments

Anastasia K. Lavrinenko,Theodosios Famprikis,James A. Quirk,Victor Landgraf,Pedro B. Groszewicz,Jouke R. Heringa,Stef Smeets,Victor Azizi,Simone Ciarella,James A. Dawson,Marnix Wagemaker,Alexandros Vasileiadis

DOI: https://doi.org/10.1039/d4ta04628e/v1/review2

IF: 11.9

2024-09-16

Journal of Materials Chemistry A

Abstract:Understanding diffusion mechanisms in solid electrolytes is crucial for advancing solid-state battery technologies. This study investigates the role of structural disorder in Li 7− x PS 6− x Br x argyrodites using ab initio molecular dynamics, focusing on the correlation between key structural descriptors and Li-ion conductivity. Commonly suggested parameters, such as configurational entropy, bromide site occupancy, and bromine content, correlate with Li-ion diffusivity but do not consistently explain conductivity trends. We find that a uniform distribution of bromine and sulfur ions across the 4a and 4d sublattices is critical for achieving high conductivity by facilitating optimal lithium jump activation energies, anion-lithium distances, and charge distribution. Additionally, we introduce the ionic potential as a simple descriptor that predicts argyrodite conductivity by assessing the interaction strength between cations and anions. By analyzing the correlation between ionic potential and conductivity for a range of argyrodite compositions published over the past decade, we demonstrate its broad applicability. Minimizing and equalizing ionic potentials across both sublattices enhances conductivity by reducing the strength of anion-lithium interactions. Our analysis of local environments coordinating Li jumps reveals that balancing high and low-energy pathways is crucial for enabling macroscopic diffusion, supported by investigating percolating pathways. This study highlights the significance of the anionic framework in lithium mobility and informs the design of solid electrolytes for improved energy storage systems.

materials science, multidisciplinary,chemistry, physical,energy & fuels
How Halide Sub-Lattice Affects Li Ion Transport in Antiperovskites

Robert L Sacci,Tyler H Bennett,Kee Sung Han,Hong Fang,Puru Jena,Vijay Murugesan,Jagjit Nanda

DOI: https://doi.org/10.1149/ma2022-024467mtgabs

2022-11-24

ECS Meeting Abstracts

Abstract:Li-based antiperovskites (LiAP, Li 3-x OH x X, X = Cl, Br) are an emergent class of Li-ion conductors that are potential candidates for electrolytes in all-solid-state batteries. As a material class, pLiAP shows vast compositional design freedom; however, the resulting properties are susceptible to synthesis and processing methodologies. For example, proton incorporation and halide mixing stabilize the perovskite cubic phase near room temperature, and halides mixtures near the eutectic points drive the solid-state reaction temperature down, allowing for faster synthesis and processing conditions (< 1 h). The mixed halogen compositions, such as Li 2 OHCl 0.37 Br 0.63 , also show a 30-fold improvement in room temperature ionic conductivity of a single halide structure, 1.5 x 10 -6 vs. 4.9 x 10 -8 S cm -1 (Li 2 OHCl). Despite the growing interest in these materials, important questions remain about LiAPs on the structure-property correlation upon halide substitution and the correlations between the OH/halide dynamics and the Li-ion transport. We thus attempted to deconvolute how proton dynamics and halide substitution enhance or impede ionic conduction in pLiAP at compositions near the halide salts' eutectic points. We combined infrared spectroscopy and nuclear magnetic resonance (NMR) with first-principles density functional theory (DFT) calculations to deconvolute halide mixing effects from local proton dynamics on Li-ion transport. The NMR results and ab initio molecular dynamics suggest that Li + transport is more strongly correlated with halide dynamics. While the hydroxide does stabilize the highly conductive cubic structure, it limits correlative ionic transport and thus lowers Li + conductivity. Experiment design, data analysis, and manuscript preparation (RLS) were supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Science and Engineering. Synthesis (THB and JN) were supported by Asst. Secretary, Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (VTO) through the Advanced Battery Materials Research (BMR) Program. P. J. acknowledges partial support by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under Award DE-FG02-96ER45579. H. F. was supported from U.S. Department of Energy (Award No. DE-EE0008865). This research used resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The NMR characterization part of the work is supported by the Joint Center for Energy Storage Research (JCESR), an Energy Innovation Hub funded by the U.S. Department of Energy, Office of Science, and Basic Energy Sciences. The NMR work was performed at the W. R. Wiley Environmental Molecular Sciences Laboratory, a DOE User Facility sponsored by the Office of Biological and Environmental Research, located at Pacific Northwest National Laboratory. Figure 1
Atomistic Mechanism of High Ionic Conductivity in Lithium Ytterbium-Based Halide Solid Electrolytes: A First-Principles Study

Limin Wang,Wei Xiao,Lu Sun,Rong Yang,Jinqiu Yu,Ligen Wang

DOI: https://doi.org/10.1016/j.jre.2023.01.013

IF: 4.632

2024-01-01

Journal of Rare Earths

Abstract:As the next generation of commercial automotive power batteries begins replacing liquid lithium batteries, many look towards all-solid-state batteries to pioneer the future. All-solid-state batteries have attracted the attention of countless researchers around the world because of their high safety and high energy density. In recent times, halide solid-state electrolytes have become a research hotspot within solid-state electrolytes because of their potentially superior properties. In this paper, in the framework of DFT, we investigated the atomic mechanisms of improving the ionic conductivity and stability of Li3YbCl6. Our calculations show that both trigonal and orthorhombic Li3YbCl6 exhibit wide electrochemical windows and metastable properties (100 meV/atom > Ehull > 0 meV/atom). However, the orthorhombic Li3YbCl6 can be stabilized at high temperatures by taking the vibrational entropy into account, which is supported by the experimental results. Moreover, it is expected that because of the Yb/Li synergistic interactions that, due to their strong mutual coulomb repulsion, influence the Li+ transport behavior, the orthorhombic Li3YbCl6 might have superior ionic conductivities with appropriate Li+ migration paths determined by the Yb3+ distribution. Also, higher ionic conductivities can be obtained by regulating the random distribution of Li+ ions. Further Li+-deficiency can also largely increase the ionic conductivity by invoking vacancies. This study helps gain a deeper understanding of the laws that govern ionic conductivities and stabilities and provides a certain theoretical reference for the experimental development and design of halide solid-state electrolytes.
Unexpected anion segregation enabling high conductivity in argyrodite Li6−xPS5−xClBrx solid electrolytes

Seho Yi,Taegon Jeon,Gyeong Ho Cha,Young-Kyu Han,Sung Chul Jung

DOI: https://doi.org/10.1039/d4ta06120a/v2/review2

IF: 11.9

2024-11-13

Journal of Materials Chemistry A

Abstract:Site disorder between S and Cl anions at Wyckoff 4a and 4d sites is a key structural feature of the argyrodite Li 6 PS 5 Cl solid electrolyte in all-solid-state batteries. This first-principles study of the Li 5.75 PS 4.75 ClBr 0.25 system is the first to report that S/Cl/Br anion disorder leads to an unexpected segregation of two anion sublattice domains, one composed of S anions and the other composed of Cl/Br anions. Increasing the degree of anion disorder enhances the stability of Li 5.75 PS 4.75 ClBr 0.25 , resulting in the formation of the most stable structure with anion segregation when the highest degree of anion disorder is reached. The anion segregation causes a greater distribution of Li ions in the S domain than in the Cl/Br domain, which greatly reduces the repulsion between S 2− ions compared to the repulsion between Cl − /Br − ions and effectively stabilizes Li 5.75 PS 4.75 ClBr 0.25 . Li ions in the S domain move with difficulty due to the strong Li–S bonds, whereas Li ions in the Cl/Br domain can move relatively freely due to the weak Li–Cl (Li–Br) bonds, resulting in a high conductivity of 10.1 mS cm −1 . This study suggests that domain-dependent Li migration due to anion segregation is the fundamental ion transport mechanism in Li 6− x PS 5− x ClBr x and offers a new perspective for understanding superionic conductivity in Li 6 PS 5 Cl-based argyrodite solid electrolytes.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Exploring superionic conduction in lithium oxyhalide solid electrolytes considering composition and structural factors

Fiaz Hussain,Jinlong Zhu,Yusheng Zhao,Wei Xia

DOI: https://doi.org/10.1038/s41524-024-01346-y

IF: 12.256

2024-07-15

npj Computational Materials

Abstract:Lithium (Li) oxyhalides have emerged as promising solid electrolyte candidates for all-solid-state batteries (ASSBs) due to their superior ionic conductivity and excellent cathode capability. However, the mechanism of Li transport in oxyhalides has remained unclear due to the complex nature of these compounds, which often comprise multiple phases such as crystalline and amorphous structures. Herein, a first-principles study using density functional theory and ab initio molecular dynamic simulation is performed to gain a theoretical insight into the structural behavior and conduction pathway in oxyhalide electrolytes. Li 2.5 ZrCl 5.5 O 0.5 electrolyte, as a case of study, is comprehensively investigated by considering various phases. It's revealed that the phase is energetically more stable and exhibits one order of magnitude higher Li conductivity compared to the C2/m phase among potential crystalline phases (1.63 mS cm −1 versus 0.24 mS cm −1 at room temperature). Interestingly, an amorphous phase with even higher ionic conductivity (~40 mS cm −1 ) can be generated by creating LiCl-deficient Li-Zr-O-Cl compounds. The remarkably high ionic conductivity suggests that the amorphous structure is likely the dominant conducting pathway, facilitating fast Li transport due the weak bonding between Li and other atoms. Cl anion mobility is also observed in the amorphous phase through mean square displacement (MSD) calculation, although further analyses revealed this to be localized vibration. This study sheds light on the nature of oxychloride structures and promotes a deeper understanding of the superionic conduction mechanism in oxychlorides, which will contribute to the development of advanced solid electrolytes and ASSBs.

materials science, multidisciplinary,chemistry, physical
A SUGGESTION TO MR. BRYAN.

E. Kindle

DOI: https://doi.org/10.1126/SCIENCE.55.1423.373-A

IF: 56.9

1922-04-07

Science

Abstract:
Formation process of halogen-rich argyrodite: elemental disordering of atomic arrangement at the 4a and 4d sites in a heat treatment

Hiroshi Yamaguchi,Atsushi Yao,Satoshi Hiroi,Hiroki Yamada,Jo-chi Tseng,Seiya Shimono,Futoshi Utsuno,Koji Ohara

DOI: https://doi.org/10.1007/s10008-024-05881-y

IF: 2.747

2024-04-07

Journal of Solid State Electrochemistry

Abstract:Sulfide-based solid electrolytes are increasingly recognized as crucial materials for the practical application of all-solid-state batteries. In particular, halogen-rich argyrodites, featuring hybrid doping with chlorine and bromine, demonstrate that the Li-ion conductivity is influenced by the degree of elemental disorder among chlorine, bromine, and sulfur at the anion sites (4a, 4d). This study employed in situ XRD/PDF during the annealing process of sample synthesis to investigate the formation of disorder at these anion sites. Initially, a sulfur-rich argyrodite phase formed at lower annealing temperatures (200ŌĆō320┬Ā┬░C). Subsequently, in the higher temperature range (320ŌĆō460┬Ā┬░C), lithium halide amorphization and thermal diffusion led to the formation of a halogen-rich argyrodite phase. This phase is characterized by the substitution of sulfur with halogen at the 4a/4d sites in argyrodites.

electrochemistry
Site Disorder Drives Cyanide Dynamics and Fast Ion Transport in Li 6 PS 5 CN

Connor E. Ray,Yi Yao,Shelby L. Galinat,Bennett Addison,Volker Blum,Annalise E. Maughan

DOI: https://doi.org/10.1021/acs.chemmater.4c00979

IF: 10.508

2024-10-15

Chemistry of Materials

Abstract:Halide argyrodite solid-state electrolytes of the general formula Li(6)PS(5) X exhibit complex static and dynamic disorder that plays a crucial role in ion transport processes. Here, we unravel the rich interplay between site disorder and dynamics in the plastic crystal argyrodite Li(6)PS(5)CN and the impact on ion diffusion processes through a suite of experimental and computational methodologies, including temperature-dependent synchrotron powder X-ray diffraction, AC electrochemical impedance...

materials science, multidisciplinary,chemistry, physical
Enhanced lithium dendrite suppression ability through SiO2 substitution in superionic halogen-rich argyrodites and their application in all-solid-state lithium batteries

Su Jeong Park,Yuvaraj Subramanian,Yu Jin Jung,Sung Kang,Kwang-Sun Ryu

DOI: https://doi.org/10.1016/j.jiec.2024.01.053

IF: 6.76

2024-01-01

Journal of Industrial and Engineering Chemistry

Abstract:Among the inorganic solid electrolytes, it has been reported that argyrodites of sulfide-based electrolyte systems have a number of advantages, including high ionic conductivity and mechanical flexibility. Despite these advantages, their poor compatibility with Li metal still represents a problem. In this work, we prepared a halogen-rich argyrodites Li6-xPS5-xCl1+x solid electrolyte using a high-energy ball milling process. According to the composition test, Li5.3PS4.3Cl1.7 exhibited a high ionic conductivity (9.0 mS cm-1) at room temperature. Thus, we proposed SiO2 doped halogen-rich argyrodites while aiming to achieve improved electrochemical performance and the ionic conductivity. At a value of 9.4 mS cm-1, the ionic conductivity of Li5.34P0.96Si0.04S4.22O0.08Cl1.7 compositions was slightly increased compared to that of Li5.3PS4.3Cl1.7 (9.0 mS cm-1). Moreover, that composition showed a higher critical current density (1.0 mA cm-2) than that of Li5.3PS4.3Cl1.7 (0.35 mA cm-2), indicating that SiO2 doped Li5.3PS4.3Cl1.7 solid electrolyte improved the compatibility of the electrolyte against Li metal by reducing the side reaction with the Li metals. The air stability was also enhanced after SiO2 doping. These results confirmed that metal oxide doping in halogen-rich argyrodites contributed to high ionic conductivity and good electrochemical performance.

engineering, chemical,chemistry, multidisciplinary
From symmetry breaking in the bulk to phase transitions at the surface: a quantum-mechanical exploration of Li6PS5Cl argyrodite superionic conductor

Maddalena D'Amore,Loredana Edith Daga,Riccardo Rocca,Mauro Francesco Sgroi,Naiara Leticia Marana,Silvia Maria Casassa,Lorenzo Maschio,Anna Maria Ferrari

DOI: https://doi.org/10.1039/d2cp03599e

2022-09-28

Abstract:Lithium superionic conductor electrolytes may enable the safe use of metallic lithium anodes in all-solid-state batteries. The key to a successful application is a high Li conductivity in the electrolyte material, to be achieved through the maintenance of intimate contact with the electrodes and the knowledge of the chemical nature of that contact. In this manuscript, we tackle this issue by a theoretical ab initio approach. Focusing on the Li6PS5Cl, a thiophosphate with high ionic conductivity, we carry on thorough modeling of the surfaces together with the prediction of the thermal and elastic behaviour. Our investigation leads to some new findings: the bulk structure, as reported in the literature, appears to be metastable, with spontaneous symmetry breaking. Moreover, the relevant stoichiometric surfaces identified for stable and metastable crystal structures are not up-down symmetry related and they expose from one side Li2S and LiCl. Surface reconstructions can be interpreted as local phase transitions. We also predict entirely ab initio the morphology of crystallites, charge, and electrostatic potential at surfaces, together with the effect of temperature on structural properties and the elastic behaviour of this material. Such findings may constitute the relevant groundwork for a better understanding of ionic transport in Li-ion conductors at the electrolyte/anode and electrolyte/cathode interfaces.
Designing lithium halide solid electrolytes

Qidi Wang,Yunan Zhou,Xuelong Wang,Hao Guo,Shuiping Gong,Zhenpeng Yao,Fangting Wu,Jianlin Wang,Swapna Ganapathy,Xuedong Bai,Baohua Li,Chenglong Zhao,Jürgen Janek,Marnix Wagemaker

DOI: https://doi.org/10.1038/s41467-024-45258-3

IF: 16.6

2024-02-06

Nature Communications

Abstract:All-solid-state lithium batteries have attracted widespread attention for next-generation energy storage, potentially providing enhanced safety and cycling stability. The performance of such batteries relies on solid electrolyte materials; hence many structures/phases are being investigated with increasing compositional complexity. Among the various solid electrolytes, lithium halides show promising ionic conductivity and cathode compatibility, however, there are no effective guidelines when moving toward complex compositions that go beyond ab -initio modeling. Here, we show that ionic potential, the ratio of charge number and ion radius, can effectively capture the key interactions within halide materials, making it possible to guide the design of the representative crystal structures. This is demonstrated by the preparation of a family of complex layered halides that combine an enhanced conductivity with a favorable isometric morphology, induced by the high configurational entropy. This work provides insights into the characteristics of complex halide phases and presents a methodology for designing solid materials.

multidisciplinary sciences
Effect of Processing on Structure and Ionic Conductivity of Chlorine‐Rich Lithium Argyrodites

Shuo Wang,Ajay Gautam,Xinbin Wu,Shenghao Li,Xin Zhang,Hongcai He,Yuanhua Lin,Yang Shen,Ce-Wen Nan

DOI: https://doi.org/10.1002/aesr.202200197

2023-01-01

Advanced Energy and Sustainability Research

Abstract:Lithium argyrodite solid electrolytes have attracted ever‐increasing attention for all‐solid‐state batteries due to their high ionic conductivity and low cost. However, the relation between structure and ionic transport for the halogen‐rich lithium argyrodites under different synthesis routes is still elusive. Herein, the influence of synthesis procedures, such as annealing conditions and balling milling, on the structure, ionic conductivity, and activation energy of the lithium argyrodite (e.g., Li5.5PS4.5Cl1.5, Li5.3PS4.3Cl1.7), is systematically investigated. Compared with high‐energy ball milling followed by annealing, using fast dry mixing followed by annealing can obtain comparable ionic conductivity of the chlorine‐rich lithium argyrodites. Single‐crystal LiNi0.83Co0.11Mn0.06O2‐based solid‐state battery with these electrolytes shows stable cycling performance, demonstrating that chlorine‐rich lithium argyrodite is a promising candidate for all‐solid‐state batteries.
The effect of cation-disorder on lithium transport in halide superionic conductors

Peichen Zhong,Sunny Gupta,Bowen Deng,KyuJung Jun,Gerbrand Ceder

2024-03-13

Abstract:Among the chloride-based Li-ion solid electrolytes, Li$_2$ZrCl$_6$ (LZC) have emerged as potential candidates due to their affordability, moisture stability, and high ionic conductivity. LZC synthesized by solid-state heating exhibits limited Li-ion conductivity while the mechanochemical ball-milled material is more conductive. In this computational study, we integrate thermodynamic modeling, using cluster-expansion Monte Carlo, and kinetic modeling, using molecular dynamics, to investigate whether cation disorder can be achieved in LZC, and how it affects Li-ion transport. Our results indicate that fast Li-ion conductivity is induced by the activation of Li/vacancy disorder, which itself depends on the degree of Zr disorder. We find that the very high-temperature scale at which equilibrium Zr-disorder can form precludes any equilibrium synthesis processes for achieving fast Li-ion conductivity, rationalizing why only non-equilibrium synthesis methods, such as ball milling leads to good conductivity. We identify as the critical mechanism the lack of Li/vacancy disorder near room temperature when Zr is well-ordered. Our simulations further show that the Li/vacancy order-disorder transition temperature is lowered by Zr disorder, which is necessary for creating high Li diffusivity at room temperature. The insights obtained from this study raise a challenge for the large-scale production of these materials and the potential for the long-term stability of their properties.

Materials Science,Computational Physics
Tailoring the disorder landscape to increase conductivity in thiophosphate electrolytes

Florian Strauss,Shuo Wang,Ce-Wen Nan,Torsten Brezesinski

DOI: https://doi.org/10.1016/j.matt.2024.01.027

IF: 18.9

2024-03-01

Matter

Abstract:In a recent study published in Angewandte Chemie, Li and colleagues report that introducing disorder into Li5.5PS4.5ClxBr1.5−x solid electrolytes via Cl−/Br−/S2− mixing affects charge transport, leading to a room temperature ionic conductivity beyond 20 mS/cm. This entails the possibility of improving ion mobility by tailoring the occupational disorder in lithium argyrodites.

materials science, multidisciplinary
Transforming Li3PS4 Via Halide Incorporation: a Path to Improved Ionic Conductivity and Stability in All‐Solid‐State Batteries

Tej P. Poudel,Michael J. Deck,Pengbo Wang,Yan‐Yan Hu

DOI: https://doi.org/10.1002/adfm.202309656

IF: 19

2023-10-22

Advanced Functional Materials

Abstract:Incorporation of Br‐ into the β‐Li3PS4 anion sublattice creates local disorder and diversifies coordinating partners of Li+, yielding fast‐ion transport with lowered activation energy barriers and improved compatibility with Li metal anodes. This approach holds promise for enhancing the ion conduction and stability of sulfide‐based solid electrolytes for all‐solid‐state batteries. To enhance Li+ transport in all‐solid‐state batteries (ASSBs), harnessing localized nanoscale disorder can be instrumental, especially in sulfide‐based solid electrolytes (SEs). In this investigation, the transformation of the model SE, Li3PS4, is delved into via the introduction of LiBr. 31P nuclear magnetic resonance (NMR)unveils the emergence of a glassy PS43− network interspersed with Br−. 6Li NMR corroborates swift Li+ migration between PS43− and Br−, with increased Li+ mobility indicated by NMR relaxation measurements. A more than fourfold enhancement in ionic conductivity is observed upon LiBr incorporation into Li3PS4. Moreover, a notable decrease in activation energy underscores the pivotal role of Br− incorporation within the anionic lattice, effectively reducing the energy barrier for ion conduction and transitioning Li+ transport dimensionality from 2D to 3D. The compatibility of Li3PS4 with Li metal is improved through LiBr incorporation, alongside an increase in critical current density from 0.34 to 0.50 mA cm−2, while preserving the electrochemical stability window. ASSBs with 3Li3PS4:LiBr as the SE showcase robust high‐rate and long‐term cycling performance. These findings collectively indicate the potential of lithium halide incorporation as a promising avenue to enhance the ionic conductivity and stability of SEs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Enhanced Air Stability and Interfacial Compatibility of Li-Argyrodite Sulfide Electrolyte Triggered by CuBr Co-Substitution for All-Solid-State Lithium Batteries

Zhao Jiang,Yu Liu,Hongling Peng,Jingru Li,Xueer Xu,Han Su,Yu Zhong,Xiuli Wang,Changdong Gu,Jiangping Tu

DOI: https://doi.org/10.1016/j.ensm.2023.01.018

IF: 20.4

2023-01-15

Energy Storage Materials

Abstract:As a class of candidate materials for all-solid-state lithium batteries (ASSLBs), Li-argyrodite electrolytes have drawn extensive attention due to their cheap raw materials, high ionic conductivity, and suitable mechanical properties. However, poor Li incompatibility and inferior air stability of the sulfide electrolytes have seriously hindered their practical applications. Herein, novel argyrodite-based Li 6-2 x Cu x PS 5- x Br 1+ x (0 ≤ x ≤ 0.4) electrolytes are synthesized via CuBr co-substituting to overcome above obstacles. Theoretical calculations predict that Cu + prefers to replace the Li + site instead of P 5+ site, which is further confirmed by the X-ray diffraction and Raman measurement. The optimized Li 5.6 Cu 0.2 PS 4.8 Br 1.2 electrolyte possesses a high ionic conductivity of 3.65 mS cm −1 . The ab initio molecular dynamics (AIMD) simulations testify that the incorporation of Br ‒ facilitates the inter-cage jumps of Li + , resulting in an improved long-range Li + migration. Besides, such a modified electrolyte represents enhanced Li compatibility and good air stability compared to pristine Li 6 PS 5 Br. The constructed ASSLBs with the Li 5.6 Cu 0.2 PS 4.8 Br 1.2 electrolyte also exhibit cycling stability and rate capability. As a result, it is a promising path to develop CuBr co-substituted argyrodite electrolytes for ASSLBs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Environmental lead toxicity and nutritional factors.

A comprehensive investigation of Li-ion conductivity in lithium hydroxy halide antiperovskite solid electrolytes

On the Local Charge Inhomogeneity and Lithium Distribution in the Superionic Argyrodites Li6PS5X (X = Cl, Br, I)

Tunable Lithium-Ion Transport in Mixed-Halide Argyrodites Li 6– x PS 5– x ClBr x : An Unusual Compositional Space

Configurational and Dynamical Heterogeneity in Superionic Li5.3PS4.3Cl1.7−xBrx

Optimizing ionic transport in argyrodites: a unified view on the role of sulfur/halide distribution and local environments

How Halide Sub-Lattice Affects Li Ion Transport in Antiperovskites

Atomistic Mechanism of High Ionic Conductivity in Lithium Ytterbium-Based Halide Solid Electrolytes: A First-Principles Study

Unexpected anion segregation enabling high conductivity in argyrodite Li6−xPS5−xClBrx solid electrolytes

Exploring superionic conduction in lithium oxyhalide solid electrolytes considering composition and structural factors

A SUGGESTION TO MR. BRYAN.

Formation process of halogen-rich argyrodite: elemental disordering of atomic arrangement at the 4a and 4d sites in a heat treatment

Site Disorder Drives Cyanide Dynamics and Fast Ion Transport in Li 6 PS 5 CN

Enhanced lithium dendrite suppression ability through SiO2 substitution in superionic halogen-rich argyrodites and their application in all-solid-state lithium batteries

From symmetry breaking in the bulk to phase transitions at the surface: a quantum-mechanical exploration of Li6PS5Cl argyrodite superionic conductor

Designing lithium halide solid electrolytes

Effect of Processing on Structure and Ionic Conductivity of Chlorine‐Rich Lithium Argyrodites

The effect of cation-disorder on lithium transport in halide superionic conductors

Tailoring the disorder landscape to increase conductivity in thiophosphate electrolytes

Transforming Li3PS4 Via Halide Incorporation: a Path to Improved Ionic Conductivity and Stability in All‐Solid‐State Batteries

Enhanced Air Stability and Interfacial Compatibility of Li-Argyrodite Sulfide Electrolyte Triggered by CuBr Co-Substitution for All-Solid-State Lithium Batteries