Abstract:OCCUPATIONAL APPLICATIONS Military personnel are at greater risk of injuries due to frequent load carriage. Novel exoskeleton technology may have benefits for soldiers, such as reduced physical burden through load carriage support that may result in decreased metabolic cost, reduced fatigue, and lower risk of injuries during walking. However, as for most assistive devices, a familiarization period is likely necessary to obtain the full potential of the device. Our results show that the metabolic cost of walking (MWC) was initially increased significantly upon provision of the passive exoskeleton, though it returned to baseline values after a 9-day familiarization period. The exoskeleton remained effective after a three-month pause, with a MCW below baseline. These results suggest that to properly assess the assistance of an exoskeleton, a sufficient familiarization period should be mandatory. Background : Military load carriage has been shown to alter gait patterns, resulting in an increased metabolic cost during walking (MCW). Soldiers' burden could be mitigated by wearing a passive exoskeleton, but the additional payload of the device can alter movement patterns during gait, rendering it detrimental. Integrating principles of motor learning during a familiarization period could allow users to develop adaptive motor strategies, thereby decreasing MCW. Purpose : The aim of this study was to explore the influence of a familiarization period on MCW when soldiers wear a passive, load-bearing, prototype exoskeleton (Exo). Methods : Three male soldiers walked on a treadmill with a 38 kg payload at eight speeds (1.8-6.0 km/h) under five conditions: 1) no exoskeleton (NoExo); 2) exoskeleton pre-familiarization (Exo Pre ); 3) exoskeleton post-familiarization (Exo Post ); 4) no exoskeleton follow-up (NoExo FU ); and 5) exoskeleton follow-up (Exo FU ). Each experimental trial consisted of 10 minutes of standing followed by 10 minutes of walking at a constant speed. Metabolic data were normalized to walking speed (J/kg·m) to obtain the MCW. The familiarization period consisted of 9 days of activities with the exoskeleton using a standardized protocol. Differences in MCW with and without the Exo were compared at the eight walking speeds using a nonparametric analysis of Longitudinal Data. Results : There was a statistically significant decrease in MCW after familiarization with the Exo, particularly during Exo FU with a relative treatment effect of 0.11 − 0.19. There were also significant reductions in MCW during Exo FU when compared to NoExo FU [participant 01 = 0.37; participant 02 = 0.27; participant 03 = 0.35]. Conclusions : A first exposure to the exoskeleton increased MCW. After familiarization, however, the MCW with the Exo returned to the NoExo level or below with a payload of 38 kg among three soldiers. A familiarization period of 3 hours per day over 2 weeks of familiarization may optimize the use of an exoskeleton.

From unknown to familiar: An exploratory longitudinal field study on occupational exoskeletons adoption

The Adoption of Occupational Exoskeletons: From Acceptability to Situated Acceptance, Questionnaire Surveys

The Role of Social Feedback in Technology Acceptance: A One-Week Diary Study with Exoskeleton Users at the Workplace

Exoskeleton acceptance and its relationship to self-efficacy enhancement, perceived usefulness, and physical relief: A field study among logistics workers

Field assessment of active BSE: Trends over test days of subjective indicators and self-reported fatigue for railway construction workers

Industrial exoskeletons from bench to field: Human-machine interface and user experience in occupational settings and tasks

Identifying Facilitators, Barriers, and Potential Solutions of Adopting Exoskeletons and Exosuits in Construction Workplaces

Exoskeletons: Contribution to Occupational Health and Safety

Supporting Surgical Teams: Identifying Needs and Barriers for Exoskeleton Implementation in the Operating Room

Active back exosuits demonstrate positive usability perceptions that drive intention-to-use in the field among logistic warehouse workers

Exploring the Change in Metabolic Cost of Walking before and after Familiarization with a Passive Load-Bearing Exoskeleton: A Case Series

Exoskeletons for workers: A case series study in an enclosures production line

User Impressions and Gait Analysis of Exoskeleton Device Usage in Generalized Tank Farm Activities

Usability of an exosuit in domestic and community environments

Factors influencing the adoption of passive exoskeletons in the construction industry: Industry perspectives

Facilitators and barriers to the adoption of active back-support exoskeletons in the construction industry

A Systematic Review on Evaluation Strategies for Field Assessment of Upper-Body Industrial Exoskeletons: Current Practices and Future Trends

Training and Familiarization with Industrial Exoskeletons: A Review of Considerations, Protocols, and Approaches for Effective Implementation

Neural, Muscular, and Perceptual responses with shoulder exoskeleton use over Days

Potential of Exoskeleton Technologies to Enhance Safety, Health, and Performance in Construction: Industry Perspectives and Future Research Directions

Biomechanical Effects of Using a Passive Exoskeleton for the Upper Limb in Industrial Manufacturing Activities: A Pilot Study