Abstract:Previous studies on laterally loaded piles in clay have mainly focused on flexible and rigid piles. Little attention has been paid to semi-rigid piles (whose pile–soil stiffness lies somewhere between those of rigid and flexible piles), which may behave as either flexible piles or rigid piles, depending on the change in soil stiffness during cycling. This study aims to understand the cyclic lateral response of a repeatedly loaded semi-rigid pile in soft clay and the failure mechanisms of the soil around the pile, through a series of centrifuge model tests and three-dimensional finite element analyses using an advanced hypoplastic clay model. Numerical parametric studies were also performed to investigate the evolution of soil flow mechanisms with increasing pile rigidity. It is revealed that the semi-rigid pile behaved as if it were a flexible pile (i.e., flexural deformation dominated) during the first few cycles, but tended to behave like a rigid pile (i.e., rotational movement prevailed) during subsequent cycles, which progressively softened the surrounding soil. As a result, the mechanisms of soil flow around the semi-rigid pile exhibited an intermediate behaviour combining the mechanisms of both flexible and rigid piles. Three distinctive mechanisms were identified: a wedge-type mechanism near the surface, a full-flow mechanism (within the transverse sections) near the middle of the pile, and a rotational soil flow mechanism (in the vertical symmetrical plane of the pile) near the lower half of the pile. By ignoring the rotational soil flow mechanism, which has a much lower resistance than the full-flow mechanism, the American Petroleum Institute code (published in 2007) underestimated the cyclic bending moment and the lateral pile displacement by 10% and 69%, respectively. Application of jet grouting around the semi-rigid pile at shallow depth significantly altered the soil flow mechanism (i.e., it was a solely wedge-type mechanism around the grouted zone).

Mechanical Mechanism of the Post-Grouting Pile

ANALYSIS OF RESIDUAL STRESS ON PILE-BASE POST GROUTING PILE

A Novel Method for Testing the Effect of Base Post-Grouting of Super-Long Piles

Experimental study on vertical bearing performance of base post-grouted cast-in-place plies in soft soils

Testing and Modeling the Behavior of Pre-Bored Grouting Planted Piles under Compression and Tension

Experimental Study on Post-Grouting Pile Vertical Bearing Performance Considering Different Grouting Methods and Parameters in Cohesive Soil

Laboratory Model Study on the Pile-Forming Mechanisms and Bearing Deformation Characteristics of CFA Piles

Research on Bearing Capacity of Post-grouting Super-long Bored Pile

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

Performance evaluation of post-grouting for bored piles installed in inhomogeneous gravel pebble stratum overlaid by deep and soft soil layers

Model Test And Numerical Analysis Of Geogrid-Reinforced Pile-Supported Foundation

Field test research on post-grouting effect for super-long cast-in-place bored pile in thick soft foundation

EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF POST-GROUTING COMPRESSIVE PILE

Field investigations on bearing characteristics of composite post-grouting piles in clastic rock layers

Cyclic Lateral Response and Failure Mechanisms of Semi-Rigid Pile in Soft Clay: Centrifuge Tests and Numerical Modelling

Field Tests of the Lateral Monotonic and Cyclic Performance of Jet-Grouting-Reinforced Cast-In-Place Piles

The Application Effect Analysis of Post Grouting under Bored Piles with Different Bearing Strata

Vertical Bearing Capacity of Large-Diameter Bored Pile

Numerical Simulation Study on Use of Groove in Controlling Compacting Effects of Jacked Pile

Engineering Character of a New-Style Pretensioned Spun Concrete Nodular Pile

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile