Human Water Requirements

K. Mellanby

DOI: https://doi.org/10.1136/bmj.1.4508.774

1947-05-31

British Medical Journal

Abstract:

What problem does this paper attempt to address?

Progressive Coding Scheme Delaying a Background Display for Image Retrieval

Shun Ido,M. Izumida,K. Murakami,Makoto Sato

Abstract:
Conch‐Shell‐Inspired Tough Ceramic

Meng Li,Nifang Zhao,Mengning Wang,Xuangeng Dai,Hao Bai

DOI: https://doi.org/10.1002/adfm.202205309

IF: 19

2022-01-01

Advanced Functional Materials

Abstract:Biological structural materials realize outstanding mechanical properties by assembling hard and soft components into complex hierarchical structures, which provide abundant inspirations for synthetic materials. Specifically, conch shell exhibits around ten times higher toughness than widely‐explored nacre due to its cross‐lamellar architecture at nano‐ to macroscopic scales. Previously, conch‐shell‐inspired materials are realized by 3D‐printing. However, it remains challenging to translate the properties of conch shell into synthetic materials because of the limited approaches to duplicating complex architecture with high ceramic contents. Here, a surface‐pattern‐induced ice‐templating strategy is reported to fabricate conch‐shell‐inspired composites with a cross‐lamellar structure across a 107‐fold range of length. This is realized by directional freezing on a grooved surface, which has previously been confirmed to induce preferential ice growth. These composites have a flexural strength of 165 MPa and a work of fracture of 8.2 kJ m–2, which are 2.5 and 2 times, respectively, higher than those of conch shell. Such conch‐shell‐inspired structure yields a toughness twice that of nacre‐mimetic structure due to multiple crack deflections. Additionally, the impact resistance of these composites is comparable to those of aluminum alloys. The research provides a feasible approach to fabricating bioinspired materials with complex architectures and multifunctionality.
Multiple Deformation Mechanisms in the Stone of a Sea Urchin Tooth

Xinqiao Zhu,Shengnan Wang,Xiaohui Yan,Qiyang Li,Xiaoxiang Wang

DOI: https://doi.org/10.1039/c6ce00984k

IF: 3.756

2016-01-01

CrystEngComm

Abstract:The sea urchin tooth is a biogenic grinding tool that exhibits unique mechanical properties during food biting and rock boring, while being almost entirely composed of intrinsically brittle CaCO3 (i.e., calcite). Revealing its underlying design can broaden the potential engineering applications of low-cost, brittle structural materials (e.g., ceramics). To this end, the present study investigated the deformed stone of a Glyptocidaris crenularis tooth using transmission electron microscopy. We observed multiple deformation mechanisms associated with its structural components, i.e., the single-crystalline microfiber, mesocrystalline matrix, and organic sheath. The fiber functioned via formation of e- and r-twins, with the matrix dissipating energy mainly by crack propagation; the organic sheath located between the fiber and matrix modulated the deformation of the mineral phases, contributing to energy dissipation and damage localization of the stone component of the tooth.
Bioinspired Large-Scale Aligned Porous Materials Assembled with Dual Temperature Gradients

Hao Bai,Yuan Chen,Benjamin Delattre,Antoni P. Tomsia,Robert O. Ritchie

DOI: https://doi.org/10.1126/sciadv.1500849

IF: 13.6

2015-01-01

Science Advances

Abstract:Natural materials, such as bone, teeth, shells, and wood, exhibit outstanding properties despite being porous and made of weak constituents. Frequently, they represent a source of inspiration to design strong, tough, and lightweight materials. Although many techniques have been introduced to create such structures, a long-range order of the porosity as well as a precise control of the final architecture remain difficult to achieve. These limitations severely hinder the scale-up fabrication of layered structures aimed for larger applications. We report on a bidirectional freezing technique to successfully assemble ceramic particles into scaffolds with large-scale aligned, lamellar, porous, nacre-like structure and long-range order at the centimeter scale. This is achieved by modifying the cold finger with a polydimethylsiloxane (PDMS) wedge to control the nucleation and growth of ice crystals under dual temperature gradients. Our approach could provide an effective way of manufacturing novel bioinspired structural materials, in particular advanced materials such as composites, where a higher level of control over the structure is required.
Inhibition of cell proliferation and the action mechanisms of arsenic trioxide (As2O3) on human breast cancer cells

S. Chow,J. Chan,K. Fung

DOI: https://doi.org/10.1002/jcb.20102

2004-09-01

Journal of Cellular Biochemistry

Abstract:Arsenic trioxide (As2O3) is one of the arsenic compounds found in nature. As2O3 has recently been used to treat patients suffering from retinoic acid receptor (AML). It is of clinical interest to investigate whether As2O3 is also effective in treating solid tumors. Here, we report that As2O3 exhibited inhibitory effects on the proliferation of human breast cancer MCF‐7 cells in a dose‐ and time‐dependent manner. The 50% inhibitory concentration (IC50) of As2O3 in inhibiting proliferation of MCF‐7 cells were 8, 1.8, and 1.2 μM upon 1‐, 2‐, and 3‐day treatment, respectively. In elucidating the underlying action mechanisms, the results of experiments concerning DNA fragmentation and externalization indicated that As2O3 exerted its action on MCF‐7 cells via apoptosis, whereas the result of flow cytometry also indicated that As2O3 could induce mitochondrial mediated cell‐cycle arrest at G1 phase. Further studies by Western blot analysis indicated that As2O3 regulated apoptosis and the expression of cell‐cycle‐related proteins as it upregulated p53 protein level and downregulated bcl‐2 protein level. Results in present study indicated that As2O3 might also be a good candidate for treating breast cancer. © 2004 Wiley‐Liss, Inc.
Design and additive manufacturing of bionic hybrid structure inspired by cuttlebone to achieve superior mechanical properties and shape memory function

Luhao Yuan,Dongdong Gu,Xin Liu,Keyu Shi,Kaijie Lin,He Liu,Han Zhang,Donghua Dai,Jianfeng Sun,Wenxin Chen,Jie Wang

DOI: https://doi.org/10.1088/2631-7990/ad5084

2024-05-26

International Journal of Extreme Manufacturing

Abstract:Lightweight porous materials with high load-bearing, damage tolerance and energy absorption as well as intelligence of shape recovery after material deformation are beneficial and critical for many applications, e.g., aerospace, automobiles, electronics, etc. Cuttlebone produced in the cuttlefish has evolved vertical walls with the optimal corrugation gradient, enabling stress homogenization, significant load bearing, and damage tolerance to protect the organism from high external pressures in the deep sea. This work illustrated that the complex hybrid wave shape in cuttlebone walls, becoming more tortuous from bottom to top, creates a lightweight, load-bearing structure with progressive failure. By mimicking the cuttlebone, a novel bionic hybrid structure (BHS) was proposed, and as a comparison, a regular corrugated structure (RCS) and a straight wall structure (SWS) were designed. Three types of designed structures have been successfully manufactured by laser powder bed fusion with NiTi powder. The LPBF-processed BHS exhibited a total porosity of 0.042% and a good dimensional accuracy with a peak deviation of 17.4 μm. Microstructural analysis indicated that the LPBF-processed BHS had a strong (001) crystallographic orientation and an average size of 9.85 μm. Mechanical analysis revealed the LPBF-processed BHS could withstand over 25 000 times its weight without significant deformation and had the highest specific energy absorption value (5.32 J/g) due to the absence of stress concentration and progressive wall failure during compression. Cyclic compression testing showed that LPBF-processed BHS possessed superior viscoelastic and elasticity energy dissipation capacity. Importantly, the uniform reversible phase transition from martensite to austenite in the walls enables the structure to largely recover its pre-deformation shape when heated (over 99% recovery rate). These design strategies can serve as valuable references for the development of intelligent components that possess high mechanical efficiency and shape memory capabilities.

engineering, manufacturing,materials science, multidisciplinary
Mechanically Efficient Cellular Materials Inspired by Cuttlebone

Anran Mao,Nifang Zhao,Yahui Liang,Hao Bai

DOI: https://doi.org/10.1002/adma.202007348

IF: 29.4

2021-03-06

Advanced Materials

Abstract:Cellular materials with excellent mechanical efficiency are essential for aerospace structures, lightweight vehicles, and energy absorption. However, current synthetic cellular materials, such as lattice materials with a unit cell arranged in an ordered hierarchy, are still far behind many biological cellular materials in terms of both structural complexity and mechanical performance. Here, the complex porous structure and the mechanics of the cuttlebone are studied, which acts as a rigid buoyancy tank for cuttlefish to resist large hydrostatic pressure in the deep-sea environment. The cuttlebone structure, constructed like lamellar septa, separated by asymmetric, distorted S-shaped walls, exhibits superior strength and energy-absorption capability to the octet-truss lattice and conventional polymer and metal foams. Inspired by these findings, mechanically efficient cellular materials are designed and fabricated by 3D printing, which are greatly demanded for many applications including aerospace structures and tissue-engineering-scaffold. This study represents an effective approach for the design and engineering of high-performance cellular materials through bioinspired 3D printing.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Jianhua Shen,Ronghuan Wu,Miaoda Shen,Yingming Wei,Lihong Lei,Lili Chen,Xianyan Yang,Zhouwen Jin,Sanzhong Xu,Zhongru Gou

DOI: https://doi.org/10.1021/acsabm.9b00817

2019-01-01

ACS Applied Bio Materials

Abstract:The inorganic powder slurry extrusion printing technique known as robocasting is an interesting method to fabricate complex porous architectures whereby feedstocks containing organic binders and powders are printed and the resulting scaffolds are subjected to sintering. A major limiting factor of this technique is the simultaneous tailoring of vascularization efficacy and osteogenic activity, usually done by adding the secondary phase in the organic slurry before the writing step. Mechanical mixing of biphasic powders is required to avoid compromising the biological performance and physical defects caused by significantly different physicochemical properties. This study addresses this issue by developing a selective ion doping and microstructure tuning for the production of bioceramic scaffolds with a binozzle robocasting process. Different metal ions (Sr2+, Mg2+) were doped into wollastonite (CaSiO3; CSi) powders considering the mechanical stability and bioactive enhancement of the bioceramic scaffolds. Subsequently, the Mg-doped CSi slurries were used as shell-nozzle feedstocks added with 5, 10, and 15 μm diameter polystyrene microbeads that allowed shell-layer micropore production in pore struts during sintering. Finally, the most promising pore-strut microstructures and mechanical evolution of scaffolds were evaluated, and especially the enhanced fibrovascularization potential was confirmed in dorsal muscle embedding model in rabbits. This study may open an avenue to designing multiproperty-tuned macro- and microporous bioceramics for bone regenerative medicine, especially in challenging bone defect conditions.
Novel cuttlebone-inspired hierarchical bionic structure enabled high energy absorption

C.Y. Cui,L. Chen,S. Feng,X.G. Cui,J.Z. Lu

DOI: https://doi.org/10.1016/j.tws.2023.110693

IF: 5.881

2023-03-26

Thin-Walled Structures

Abstract:Bionic design is an effective strategy for obtaining lightweight, high-performance, and even multifunctional structures. Here, we found a novel hierarchical lamellar chamber microstructure in cuttlebone. To determine whether and how this cuttlebone-like hierarchical structure (CL-H) works on its mechanical properties, various lattices with CL-H cellular structure through digital light processing technique were designed and fabricated. Results showed that the CL-H lattice had excellent mechanical performances, achieving specific energy absorption up to a dozen times that of the non-hierarchical cuttlebone-like structure (CL) and triply periodic minimal surface structures. The CL-H lattices presented progressive failure behaviors depending on the numbers of sub-chambers. Furthermore, the mechanisms of energy absorption characteristic and failure behavior were systematically analyzed by combining microstructure examination and FEM simulation, and a schematic model was proposed. This study shed light on the design and engineering of advanced bio-inspired materials with excellent mechanical properties.

engineering, mechanical,mechanics, civil
3D Printed Long-Term Structurally Stable Bioceramic Dome Scaffolds with Controllable Biodegradation Favorable for Guided Bone Regeneration

Chuchu Xu,Fanghui Wu,Jun Yang,Hui Wang,Jimin Jiang,Zhaonan Bao,Xianyan Yang,Guojing Yang,Zhongru Gou,Fuming He

DOI: https://doi.org/10.1016/j.cej.2022.138003

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Alveolar bone loss and insufficient bone mass are major obstacles to the oral implant treatment. Guided bone regeneration (GBR) is an effective and widely used method to solve this problem. Titanium mesh with good 3D space maintenance ability shows excellent effect in the assistance of GBR. Unfortunately, such metal mesh needs to be removed by secondary operation, and the exposure after operation can't be completely avoided. Thus, it is a big challenge to repair the alveolar bone defects with different shapes and sizes by customization. Herein, the wollastonite bioceramics without and with 6% magnesium doping (CSi, CSi-Mg6) were prepared to fabricate the macroporous dome-like meshes with different CSi/CSi-Mg6 mass ratio (0:100, 16:84, 32:68) via digital light processing-based 3D printing (DLP) technique. The mechanical parameters, biodegradable rate and osteogenic stem cell viability in vitro of the bioceramic scaffolds with different morphologies were also evaluated systematically. The macroporous bioceramic dome- or titanium mesh-assisted osteogenic potentials in the calcined bone granules were evaluated in the rabbit calvarial bone defect models. The experimental results showed that the scaffolds with 16%CSi exhibited satisfactory mechanical properties and promoted the proliferation and differentiation of osteogenic stem cells. The bioactive domes displayed significantly higher osteostimulate activity than the metal mesh in the calcined bone mineral granule systems. The appreciable CSi-Mg6 content (>= 84%) in the dome scaffolds could maintain the porous structures after 16 weeks of implantation, and especially the presence of 16% CSi in the bioceramic dome may greatly balance the scaffold biodegradation and restoration treatment. Totally, the 3D printed nonstoichiometric wollastonite-based scaffolds are expected to be the promising candidates to replace titanium mesh in GBR.
The cuttlefish Sepia officinalis (Sepiidae, Cephalopoda) constructs cuttlebone from a liquid-crystal precursor

Antonio G. Checa,Julyan H. E. Cartwright,Isabel Sánchez-Almazo,José P. Andrade,Francisco Ruiz-Raya

DOI: https://doi.org/10.1038/srep11513

2015-06-27

Abstract:Cuttlebone, the sophisticated buoyancy device of cuttlefish, is made of extensive superposed chambers that have a complex internal arrangement of calcified pillars and organic membranes. It has not been clear how this structure is assembled. We find that the membranes result from a myriad of minor membranes initially filling the whole chamber, made of nanofibres evenly oriented within each membrane and slightly rotated with respect to those of adjacent membranes, producing a helical arrangement. We propose that the organism secretes a chitin-protein complex, which self-organizes layer-by-layer as a cholesteric liquid crystal, whereas the pillars are made by viscous fingering. The liquid crystallization mechanism permits us to homologize the elements of the cuttlebone with those of other coleoids and with the nacreous septa and the shells of nautiloids. These results challenge our view of this ultra-light natural material possessing desirable mechanical, structural and biological properties, suggesting that two self-organizing physical principles suffice to understand its formation.

Materials Science,Adaptation and Self-Organizing Systems,Biological Physics,Tissues and Organs
Cuttlefish Bone-Derived Calcium Phosphate Bioceramics Have Enhanced Osteogenic Properties

Boqi Pang,Jiaru Xian,Jiajun Chen,Liqi Ng,Mengting Li,Guangchun Zhao,Yixun E,Xiaorui Wang,Xiaxin Cao,Changze Zhang,Mingjing Zhang,Chaozong Liu

DOI: https://doi.org/10.3390/jfb15080212

2024-07-29

Abstract:Cuttlefish bones are byproducts of cuttlefish processing and are readily available in the marine food industry. In this study, calcium phosphate bioceramics were prepared from cuttlefish bones using a two-stage hydrothermal calcination process. The results indicated that all bioceramics derived from cuttlefish bones had a higher degradation capacity, better bone-like apatite formation ability, and higher degree of osteogenic differentiation than commercially available hydroxyapatite. Notably, β-tricalcium phosphate, which had the highest degree of Ca2+ and Sr2+ dissolution among the bioceramics extracted, can significantly upregulate osteogenic markers (alkaline phosphatase, osteocalcin) and stimulate bone matrix mineralization. Thus, it is a promising bioceramic material for applications in bone regeneration.
Biomimetic Preparation of a Ceramic Combined with Sea Urchin Stereom Structure and Nacre Mineral Bridge Structure

Hui Yu,Jianlin Li,Jianbao Li,Yongjun Chen,Xue Hou,Shuaifeng Chen,Haotian Yang

DOI: https://doi.org/10.1016/j.matdes.2019.107844

IF: 9.417

2019-01-01

Materials & Design

Abstract:Multibiological multiscale biomimetic design is a novel bionic idea that involves multi-mechanisms. Porous ceramics with a sea urchin stereom structure on a micrometre scale and a nacre mineral bridge structure on a submicron scale have been fabricated via organic foam impregnation and controlled crystallisation. The microstructure and mechanical properties of biomimetic ceramics are, respectively, characterised using scanning electron microscopy and universal testing machine. Moreover, the porosity, reliability and grain boundary stress of biomimetic ceramics are calculated via Archimedes method, Weibull theory and finite element method, respectively. Results show that the ceramic produced in this work has a porosity of 88.16% and an average pore size of 284.65 mu m. Mineral bridges of Al2TiO5 with a thickness of 30-230 mm are widely and randomly distributed in the grain boundary glass phase of Al2O3 and improved the compressive strength (2.32 MPa) and Weibull modulus (7.85) of ceramics by the multi-mechanisms of crack deflection, reducing maximum stress and homogenising stress on the grain boundary. These investigations would be of great value to the design and synthesis of novel biomimetic materials. (C) 2019 Published by Elsevier Ltd.
Experimental Study of Cuttlebone As the Scaffold in Tissue-Engineering

ZHOU Wei,WU Hai-tao,LI Cai

DOI: https://doi.org/10.3969/j.issn.1672-8467.2007.03.027

2007-01-01

Abstract:Purpose To observe the spatial structure of cuttlebone and to study the biocompatibility of cuttlebone used as scaffolds in tissue engineering. Methods The degreased cuttlebone was examined with light microscope and scanning electron microscope. The porosity rate was calculated. The cuttlebone and polyglycolic acid (PGA) were placed subcutaneously in the mice back. The inflammatory reaction and absorbing degree of cuttlebone were investigated at 1, 2, 4 and 8 weeks post-operation. The effect of cuttlebone on cell proliferation was examined by MTT assay. Results Morphological study showed regular network. The porosity rate was 92%. Only a few lymphocytes were infiltrated after 1 to 2 weeks. Cuttlebone was partially absorbed after 4 weeks and fully degraded after 8 weeks. Cell proliferated well on the cuttlebone scaffold. Conclusions Cuttlebone exhibits satisfactory biocompatibility and can be used as suitable three-dimensional porous scaffold.
Lessons from Nature for the Construction of Ceramic Cellular Materials for Superior Energy Absorption

Volker Presser,Stefanie Schultheiß,Christian Kohler,Christoph Berthold,Klaus G. Nickel,Achim Vohrer,Hermann Finckh,Thomas Stegmaier

DOI: https://doi.org/10.1002/adem.201100066

IF: 3.6

2011-06-20

Advanced Engineering Materials

Abstract:Sea urchin spines combine extreme lightweight construction with impact resistance and improved mechanical strength although being made of presumably brittle calcium carbonate (calcite). Lance and pencil sea urchins (Phyllacanthus imperialis and Heterocentrotus mammillatus) are of particular interest as they exhibit large and mechanical very stable spines and the constructional concepts of these spines was translated into graded porous alumina ceramics derived from starch‐blended slip casting. A high level of porosity (>30 vol%) is identified as the important element for graceful failure in polycrystalline alumina and graded porosity, i.e., layers of higher and lower density, can significantly improve the impact resistance of the material giving raise to what we refer to as cascading graceful failure: a mechanical response of porous materials with curved layers of graded porosity that maintains a high level of compressive strength even after the linear elastic threshold is surpassed and local structural collapse occurs. Spines of lance and pencil sea urchins are optimized to combine mechanical stability and lightweight construction. Layered porous ceramics mimicking the design and architecture of sea urchin spines show improved ability to absorb and dissipate compressive loads and impact energies. This can be realized by simply designing and tuning the pore distribution and 3D arrangement without changing the material or introducing a secondary phase. The 3D laminate structure of sea urchin spines and biomimetic ceramics is the reason for a cascading graceful failure behavior which remains a high level of the initial compressive strength.

materials science, multidisciplinary
Strengthening the Mechanical Performance of Sea Urchin Skeleton by Tube Feet Pore

Hui Yu,Tianye Lin,Yu Xin,Jianlin Li,Jianbao Li,Yongjun Chen,Xianzhi Chen,Longyang Liu

DOI: https://doi.org/10.1007/s42235-019-0007-6

2019-01-01

Abstract:In this paper, the effects of tube feet pores on the mechanical properties of Sea Urchin Skeleton (SUS) have been studied. The pore structure of drop-like Tripnenstes gratilla (a sea urchin) skeleton is characterized by Scanning Electron Microscopy (SEM). Based upon the data, the finite element method has been employed to analyze the Maximum Tensile Stress (MTS) of SUS models with different pore positions, accompanied by compressive tests on SUS-like ceramics. Results indicate that for a drop-like SUS, the MTS keeps a linear relationship with the maximum load applied on the SUS. More importantly, the mechanical performances of some perforated SUSs are better than their non-perforated counterparts due to their lower MTS values, e.g . the maximum load can thus be increased by 35% when the pore is perforated at −10°. The strengthening is attributed to the introduced pore that causes the redistribution of stress and partly reduces the stress intensity on the original MTS position. By contrast, the pore only increases the MTS value of a spherical shell under isostatic pressure or unidirectional pressing. This is a strong hint that the drop-like shape of SUS has evolved to work with the tube feet pores to better protect their bodies.
Bamboo-Inspired Porous Scaffolds for Advanced Orthopedic Implants: Design, Mechanical Properties, and Fluid Characteristics

Hao Chen,Yang Liu,Yue Lu,Aobo Zhang,Wenbo Yang,Qing Han,Jincheng Wang

DOI: https://doi.org/10.1021/acsbiomaterials.3c01690

2024-01-17

ACS Biomaterials Science & Engineering

Abstract:In orthopedic implant development, incorporating a porous structure into implants can reduce the elastic modulus to prevent stress shielding but may compromise yield strength, risking prosthesis fracture. Bamboo's natural structure, with its exceptional strength-to-weight ratio, serves as inspiration. This study explores biomimicry using bamboo-inspired porous scaffolds (BISs) resembling cortical bone, assessing their mechanical properties and fluid characteristics. The BIS consists of two 2D units controlled by structural parameters α and β. The mechanical properties, failure mechanisms, energy absorption, and predictive performance are investigated. BIS exhibits mechanical properties equivalent to those of natural bone. Specifically, α at 4/3 and β at 2/3 yield superior mechanical properties, and the destruction mechanism occurs layer by layer. Besides, the Gibson-Ashby models with different parameters are established to predict mechanical properties. Fluid dynamics analysis reveals two high-flow channels in BISs, enhancing nutrient delivery through high-flow channels and promoting cell adhesion and proliferation in low-flow regions. For wall shear stress below 30 mPa (ideal for cell growth), α at 4/3 achieves the highest percentage (99.04%), and β at 2/3 achieves 98.46%. Permeability in all structural parameters surpasses that of human bone. Enhanced performance of orthopedic implants through a bionic approach that enables the creation of pore structures suitable for implants.

materials science, biomaterials
Additive manufacturing of Bio-inspired ceramic bone Scaffolds: Structural Design, mechanical properties and biocompatibility

Chen Jiao,Deqiao Xie,Zhijing He,Huixin Liang,Lida Shen,Youwen Yang,Zongjun Tian,Guofeng Wu,Changjiang Wang

DOI: https://doi.org/10.1016/j.matdes.2022.110610

2022-05-01

Abstract:Ideal bone scaffolds require good biocompatibility and moderate mechanical properties, so as to promote the proliferation and differentiation of osteoblast cells, and achieve the good bone repair. Inspired by the porous structure of cancellous bone, 15 groups of bone scaffolds with variable irregularity (Ir1-5) and porosity (35.53-61.75%) were designed and fabricated by ceramic digital light processing (DLP) using 20 wt.% hydroxyapatite doped zirconia as the matrix material. The effects of structural parameters and material on mechanical properties and biocompatibility were studied. The shrinkage test results showed that the density of scaffolds was mainly affected by the porosity. The mechanical test results showed that Ir2 and Ir3 scaffolds had better compressive behaviors, and the compressive strength could be increased by 30% by regulating the irregularity. All scaffolds showed comparable mechanical properties to that of cancellous bone. Cell experiments showed that the effect of structure on cell proliferation, differentiation, and mineralization was most evident at the early stage of implantation. Meanwhile, the biocompatibility variation with the irregularity was consistent with mechanical properties. This study proved that a bio-inspired bone scaffold with excellent comprehensive properties could be obtained through reasonable design.

materials science, multidisciplinary
Multi‐Level Bioinspired Microlattice with Broadband Sound‐Absorption Capabilities and Deformation‐Tolerant Compressive Response

Xinwei Li,Xiang Yu,Miao Zhao,Zhendong Li,Zhonggang Wang,Wei Zhai

DOI: https://doi.org/10.1002/adfm.202210160

IF: 19

2022-11-06

Advanced Functional Materials

Abstract:Through the biomimicry of the biological cuttlebone, the introduction of pores and an optimization of the heterogeneous features, herein, a microlattice with broadband sound‐absorption and deformation tolerant design is presented. The microlattice displays a high averaged absorption coefficient of 0.735, at a low thickness of 21 mm, and a 30% increase in energy absorption as compared to its uniform counterpart. Owing to the omnipresent noise and crash hazards, multifunctional sound‐absorbing, and deformation‐tolerant materials are highly sought‐after for practical engineering design. However, challenges lie with designing such a material. Herein, leveraging the inherent mechanical robustness of the biological cuttlebone, by introducing dissipative pores, a high‐strength microlattice is presented which is also sound‐absorbing. Its absorption bandwidth and deformation tolerance are further enhanced by introducing another level of bioinspiration, based on geometrical heterogeneities amongst the building cells. A high‐fidelity microstructure‐based model is developed to predict and optimize properties. Across a broad range of frequencies from 1000 to 6300 Hz, at a low thickness of 21 mm, the optimized microlattice displays a high experimentally measured average absorption coefficient of 0.735 with 68% of the points higher than 0.7. The absorption mechanism attributes to the resonating air frictional loss whilst its broadband characteristics attribute to the multiple resonance modes working in tandem. The heterogeneous architecture also enables the microlattice to deform with a deformation‐tolerant plateau behavior not observed in its uniform counterpart, which thereby leads to a 30% improvement in the specific energy absorption. Overall, this work presents an effective approach to the design of sound and energy‐absorbing materials by modifying state‐of‐the‐art bioinspired structures.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Investigation on the Effect of the Multilayered Porous Structure of Sea Urchin Skeleton on Its Mechanical Behavior

Hui Yu,Jianbao Li,Zhenhao Hou,Jianlin Li,Yongjun Chen,Chunfu Lin

DOI: https://doi.org/10.1007/s42235-020-0038-z

IF: 2.995

2020-01-01

Journal of Bionic Engineering

Abstract:In this paper, the effect of stereom structure on the mechanical behavior of the Sea Urchin Inorganic Skeleton (SUIS) has been studied. The stereom microstructure of both Anthocidaris crassispina and Tripnenstes gratilla was characterized by Scanning Electron Microscopy (SEM). Results indicate that a three-layer porous structure consisting of a growth, a support, and a resorption (GSR) layer is a common denominator for both species. The effect of GSR layer order on the mechanical behavior of the SUIS was studied by a finite element method. The results show that the GSR model could effectively reduce the maximum tensile stress on its meridional sutures under unidirectional pressure, hydrostatic pressure, and self-weight situation. For a fabricated three-layered ceramic test strips with different layer orders, the mechanical properties have a completely opposite performance compared with the compressive properties of the calculated SUIS-like models. This indicates that the GSR structure can effectively improve the mechanical properties of the SUIS, but it cannot be applied to bionics without considering its synergistic effect with the macro-structure of the SUIS. This is a typical example of bionic invalidation by single structure, where multi-level structure bionics may be an effective solution.

Human Water Requirements

Progressive Coding Scheme Delaying a Background Display for Image Retrieval

Conch‐Shell‐Inspired Tough Ceramic

Multiple Deformation Mechanisms in the Stone of a Sea Urchin Tooth

Bioinspired Large-Scale Aligned Porous Materials Assembled with Dual Temperature Gradients

Inhibition of cell proliferation and the action mechanisms of arsenic trioxide (As2O3) on human breast cancer cells

Design and additive manufacturing of bionic hybrid structure inspired by cuttlebone to achieve superior mechanical properties and shape memory function

Mechanically Efficient Cellular Materials Inspired by Cuttlebone

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Novel cuttlebone-inspired hierarchical bionic structure enabled high energy absorption

3D Printed Long-Term Structurally Stable Bioceramic Dome Scaffolds with Controllable Biodegradation Favorable for Guided Bone Regeneration

The cuttlefish Sepia officinalis (Sepiidae, Cephalopoda) constructs cuttlebone from a liquid-crystal precursor

Cuttlefish Bone-Derived Calcium Phosphate Bioceramics Have Enhanced Osteogenic Properties

Biomimetic Preparation of a Ceramic Combined with Sea Urchin Stereom Structure and Nacre Mineral Bridge Structure

Experimental Study of Cuttlebone As the Scaffold in Tissue-Engineering

Lessons from Nature for the Construction of Ceramic Cellular Materials for Superior Energy Absorption

Strengthening the Mechanical Performance of Sea Urchin Skeleton by Tube Feet Pore

Bamboo-Inspired Porous Scaffolds for Advanced Orthopedic Implants: Design, Mechanical Properties, and Fluid Characteristics

Additive manufacturing of Bio-inspired ceramic bone Scaffolds: Structural Design, mechanical properties and biocompatibility

Multi‐Level Bioinspired Microlattice with Broadband Sound‐Absorption Capabilities and Deformation‐Tolerant Compressive Response

Investigation on the Effect of the Multilayered Porous Structure of Sea Urchin Skeleton on Its Mechanical Behavior