Abstract:The development of sustainable and innovative products through solving the constantly raising demands of end users is one of the significant parts of research and development. Herein, the development of a green composite is reported with the reinforcement of naturally originated flax and artificial glass woven fabrics through incorporating with the methylene diphenyl diisocyanate (MDI) resin. The glass fabrics were treated with silane and flax fabrics by using NaOH before the composite production to increase the affinity of fibers toward the resin. Composite panels were developed with four different ratios of glass and flax woven fabric reinforcement (100/0, 83.33/16.67, 50/50, and 0/100) to investigate their performance with the MDI resin. The composites were characterized by tensile and flexural analysis to investigate the mechanical performances. The thermogravimetric characteristics of the composites were examined for checking the thermal stability of the produced composites. The surface morphology was investigated for observing the surfaces of the composites before and after applying tensile loads. Scanning electron microscopy (SEM) deployed EDX linear scanning was used for ensuring about the signals of different chemical constituents into the matrix. Fourier transform infrared spectroscopy (FTIR) was conducted for finding out the fingerprint of the chemical elements of the produced composites. Besides, the water absorption and moisture content tests were also conducted to examine the moisture absorption by the pure glass, flax, and hybrid composites. Further, statistical analysis of variances was performed to test the significance of the differences in the mechanical properties of the individual types of the composites developed. For investigating the relationship between the proportion of woven glass fabric in the reinforcement and the mechanical properties, regression analysis was used. The ANOVA test was also examined for checking the significance of the mechanical properties of the composites.This article is cited by 1 publications.

Mechanical and Rheological Behaviour of Composites Reinforced with Natural Fibres

A Study of the Mechanical Properties of Composite Materials with a Dammar-Based Hybrid Matrix and Two Types of Flax Fabric Reinforcement

A Study of Some Mechanical Properties of a Category of Composites with a Hybrid Matrix and Natural Reinforcements

A Study of Some Mechanical Properties of Composite Materials with a Dammar-Based Hybrid Matrix and Reinforced by Waste Paper

Characterisation of Hemp Fibres Reinforced Composites Using Thermoplastic Polymers as Matrices

Microstructures and Mechanical Properties of Natural Fibers

Ecodesign Enhancement of Polymeric Resins: Reinforcing with Synthetic and Natural Fibers Using Theory of Inventive Problem Solving-Algorithm of Inventive Problem Solving for Sustainable Composite Design

Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites

Experimental Investigation of Bi-Directional Flax with Ramie Fibre-Reinforced Phenol-Formaldehyde Hybrid Composites

Mechanical, wear and thermal properties of natural fiber-reinforced epoxy composite: cotton, sisal, coir and wool fibers

Rheological study of natural fiber biocomposites: a review

Mechanical Response and Analysis of Cracking Process in Hybrid TRM Composites with Flax Textile and Curauá Fibres

Mechanical characterization of novel natural fibre-reinforced composites via a three-dimensional fibre architecture

Thermomechanical Behavior of Methylene Diphenyl Diisocyanate-Bonded Flax/Glass Woven Fabric Reinforced Laminated Composites

Tensile mechanical performance of natural/natural fiber reinforced hybrid bio-composite materials – A statistical approach

Experimental Analysis on Water Absorption Behaviour of Natural Composite Materials

Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing oh high performance composites

Mechanical Characterization of Flax and Hemp Fibers Cultivated in Romania

Comparative study of the thermomechanical properties of natural fiber reinforced thermoplastic composites: A structural application for quadcopter design

Exploring mechanical characteristics of biocomposites with dammar matrix

Mechanical characterization and low-velocity impact behavior of flax woven fabric-reinforced polymer composites