Abstract:This study examines the enhancement of the mechanical strength of polymer resins through reinforcement with synthetic (glass) and natural (hemp, jute) fibers, using the TRIZ-ARIZ methodology to optimize composite design for improved mechanical properties, sustainability, and economic efficiency. Mechanical testing, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were conducted to evaluate the properties of the composite materials. Regarding tensile strength testing, the results showed the following: jute fiber achieved the best results, with a maximum tensile values of 43.75 MPa (partial reinforcement) and 43.53 MPa (complete reinforcement); glass fiber recorded maximum tensile values of 34.55 MPa (partial reinforcement) and 34.52 MPa (complete reinforcement); and hemp fiber yielded maximum tensile values of 24.98 MPa (partial reinforcement) and 24.86 MPa (complete reinforcement). The mechanical performance of partial reinforcements (in the area of maximum stress) was similar to that of complete reinforcements, enabling a reduction in material usage by up to 60%. The thermal analysis (TGA) results demonstrated that glass fiber-reinforced composites exhibit high thermal stability, with mass loss starting at 320 °C and a residual mass of 8.02%; for other composite materials, thermal degradation begins at 305 °C, with a residual mass of 3.69%; in jute fiber-reinforced composites, thermal degradation starts at 300 °C, with a residual mass of 3.71%. SEM analysis generally revealed good fiber–matrix adhesion, while defects such as voids or detached fibers contributed to reduced mechanical strength. These results demonstrate that natural fiber-reinforced composite materials, particularly those reinforced with jute, can be used in sustainable engineering applications. They also show that localized reinforcement provides high performance with minimal resource consumption.

Exploring mechanical characteristics of biocomposites with dammar matrix

A Study of Some Mechanical Properties of Composite Materials with a Dammar-Based Hybrid Matrix and Reinforced by Waste Paper

A Study of the Mechanical Properties of Composite Materials with a Dammar-Based Hybrid Matrix and Two Types of Flax Fabric Reinforcement

A Study of Some Mechanical Properties of a Category of Composites with a Hybrid Matrix and Natural Reinforcements

Mechanical properties for composites with dammar resin reinforced with crushed corn cob

A Study of the Mechanical Properties in Composite Materials with a Dammar Based Hybrid Matrix and Reinforcement from Crushed Shells of Sunflower Seeds

The Influence of Non-Uniformities on the Mechanical Behavior of Hemp-Reinforced Composite Materials with a Dammar Matrix

Mechanical and Rheological Behaviour of Composites Reinforced with Natural Fibres

Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites

Physical and dynamic mechanical properties of continuous bamboo reinforcement/bio-based epoxy composites

Characterisation of Hemp Fibres Reinforced Composites Using Thermoplastic Polymers as Matrices

Numerical and Experimental Analysis of Mechanical Properties in Hybrid Epoxy-Basalt Composites Partially Reinforced with Cellulosic Fillers

Natural Fiber Composite with Α-Resorcylic Acid Based Bio-Epoxy Matrix

Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites

Mechanical characterization of jute/carbon hybrid epoxy composites

Ecodesign Enhancement of Polymeric Resins: Reinforcing with Synthetic and Natural Fibers Using Theory of Inventive Problem Solving-Algorithm of Inventive Problem Solving for Sustainable Composite Design

Dimension stability, tensile and thermomechanical properties of bamboo/oil palm fibre reinforced bio-epoxy hybrid biocomposites

Improvement on Tensile Properties of Epoxy Resin Matrix Sugarcane Fiber and Tamarind Seed Powder Reinforced Hybrid Bio-Composites

Simulation of the Hybrid Carbon-Aramid Composite Materials Based on Mechanical Characterization by Digital Image Correlation Method

Rheological study of natural fiber biocomposites: a review

Mechanical Evaluation on Carbon/Basalt Fiber-Reinforced Hybrid Polymer Matrix Composite