Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Physical and Mechanical Behavior of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites

Characterisation of Carbon Nano Tube Reinforced with hemp/vinyl Ester/Carbon Fiber Laminated Hybrid Composite

Experimental investigation of mechanical properties of jute/hemp fibers reinforced hybrid polyester composites

Experimental and validation of the mechanical characteristics of bio based hybrid composites

Exploring mechanical properties of eco-friendly hybrid epoxy composites reinforced with sisal, hemp, and glass fibers

Experimental investigation of hemp fiber hybrid composite material for automotive application

Development and characterization of hemp/carbon and hemp/glass hybrid and novel functionally graded hybrid composites for structural applications

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Mechanical characterization of novel Parthenium hysterophorus and Jute reinforced polymer matrix composites for light weight medium load applications and application of MADM-VIKOR approach

Fabrication and characterization of laminated natural fibers and SS303 wire mesh reinforced epoxy-based hybrid composite

Study on the engineering properties of abaca/hemp/kenaf natural fiber mats reinforced with Anogeissus latifolia, polyester resin, and fly ash nano powder nanocomposites

Performance of Hybrid Composites Fabricated by Flax/Hemp Fibers Using Wire Mesh Plain Weaving Techniques

Recent Progress on Natural Fibers Mixed with CFRP and GFRP: Properties, Characteristics, and Failure Behaviour

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Mechanical and Hygroscopic Characteristics of Unidirectional Jute/Glass and Jute/Carbon Hybrid Laminates

Evaluation of Mechanical and Water Absorption Behaviors of Jute/Carbon Fiber Reinforced Polyester Hybrid Composites

Investigations on physical, mechanical, morphological and water absorption properties of ramie/hemp/kevlar reinforced vinyl ester hybrid composites

Evaluation of the Mechanical Properties of a Novel Hybrid Composite Composed of Rattan and Date Palm Fiber: An Experimental Study

Experimental investigation on mechanical and tribological analysis of pineapple leaf ( Ananas comosus ) and sisal ( Agave sisalana ) fibers reinforced hybrid epoxy composites

Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites

Mechanical Characterization and Structural Attributes of Biohybrid Composites Derived Using Hemp, Bamboo, and Jute Fibres: an Alternative Approach in the Application of Natural Fibres in Automobile Parts