Abstract:Demand over fossil fuel are kept raising in recent decades due to the utilization of heavy material on various industrial, transportation application. To reduce such over-dependence and produce less pollution creating substance, the light weight composite material is utilized in recent decades. The present study also investigates the mechanical, fatigue, drop load impact, and dynamic mechanical properties (DMA) of a polyester composite reinforced with silane-modified Sunn hemp fiber and nanocellulose extracted from Pisum sativum sheath biomass. The composite was fabricated using a hand layup method, with polyester resin serving as the matrix and Methyl ethyl ketone peroxide (MEKP) as the catalyst. The nanocellulose was prepared through a process of delignification and bleaching, while both the fiber and nanocellulose underwent silane treatment to enhance their compatibility with the resin. Among the specimens tested, PSC3 (2 vol% silane-treated nanocellulose) demonstrated superior mechanical properties, with a tensile strength of 141 MPa, flexural strength of 163 MPa, hardness of 84 Shore-D, and Izod impact strength of 6.6 J. In fatigue testing, PSC3 showed excellent performance, maintaining a maximum stress of 50 MPa at 10 3 cycles and 24 MPa at 10 5 cycles. The drop load impact test further confirmed PSC3's high impact resistance, with energy absorption peaking at 18 J and dissipating over 22 ms. Dynamic Mechanical Analysis (DMA) revealed that PSC3 had the highest storage modulus of 6.4 GPa at 91 °C and the lowest loss factor of 0.61 at 110 °C, indicating optimal stiffness, thermal stability, and damping behavior. The silane treatment significantly improved the fiber-matrix and filler-matrix bonding, resulting in enhanced load transfer, increased stiffness, and better overall mechanical performance. SEM analysis corroborated these findings, showing uniform dispersion of filler particles in PSC3, which contributed to its superior properties by preventing stress concentration and ensuring effective reinforcement. This study highlights the potential of silane-treated bio-based composites for applications requiring high mechanical and thermal performance such as interior body cover parts in automobile engineering, outer cover parts in power sector such turbine blade, windmill industry, and defence armour applications, sports equipment, etc.

Study on the engineering properties of abaca/hemp/kenaf natural fiber mats reinforced with Anogeissus latifolia, polyester resin, and fly ash nano powder nanocomposites

A comprehensive review on the mechanical, physical, and thermal properties of abaca fibre for their introduction into structural polymer composites

Investigation on the mechanical, water absorption, and tribological performance of calotropis gigantea and abaca fiber reinforced epoxy composites

Physical and Mechanical Behavior of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites

Exploration of Mechanical Attributes, Thermal Behaviors and Atomic Force Analysis of Alkali Treated Hybrid Polyester Composites for an Engineering Application

Natural Fiber Composite with Α-Resorcylic Acid Based Bio-Epoxy Matrix

Study on the mechanical properties of alkali treated screw pine root fiber reinforced in epoxy matrix composite material

The Influence of Chemically Treated Hemp Fibre on the Mechanical Behavior and Thermal Properties of Polylactic Acid Made with FDM

Mechanical, machinability and water absorption properties of novel kenaf fiber, glass fiber and graphene composites reinforced with epoxy

Development And Characterization Of Alkali Treated Abaca Fiber Reinforced Friction Composites

Investigation on Interlaminar Shear Strength and Moisture Absorption Properties of Soybean Oil Reinforced with Aluminium Trihydrate-Filled Polyester-Based Nanocomposites

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Thermal and mechanical properties of high-performance polyester nanobiocomposites reinforced with pre-treated sunn hemp fiber for automotive applications

Development and Testing of High Performance Nylon12 (PA12) Based Natural Fiber Composites

Experimental Investigation of Bi-Directional Flax with Ramie Fibre-Reinforced Phenol-Formaldehyde Hybrid Composites

Repercussion of Fiber Content on the Mechanical, Thermal, and Thermomechanical Properties of Natural Fibers Reinforced Thermoplastic Composites for Automotive Application

Influence of fibre direction on the mechanical properties and artificial intelligence-based performance prediction of hybrid abaca-jute amino composites

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Characterisation of Nanocellulose from Waste Pisum Sativum Sheath and its Sunn Hemp Fibre-Polyester Composite: A Step Towards Valorisation of Biomass

Study on the modification of polyester resin bamboo fiber-based composite with euphorbia coagulum and their effect on mechanical and thermal properties

Load bearing investigations on lightweight rubber seed husk cellulose–ABS 3D-printed core and sunn hemp fiber-polyester composite skin building material