Abstract:In this paper, the depth-sensing indentation (DSI) technique was used to investigate the mechanical properties at the mesoscopic scale of 18Cr–8Ni austenitic stainless steel subjected to low-cycle fatigue loading. For this purpose, several representative analytical approaches for extracting basic mechanical properties, such as the indentation hardness (H), Young's modulus (E), yield strength (σys), strain hardening exponent (n) and plastic energy (Wp), from the indentation load–depth (P–h) curve were introduced. A series of experiments including constant amplitude low-cycle fatigue tests, DSI measurements and transmission electron microscopy (TEM) observations were carried out to obtain the change characteristics of the mechanical properties at the mesoscopic scale of the material as well as their micromechanisms. It is shown that, for the polycrystalline metal investigated, the cyclic plastic deformation remarkably influences its subsequent elastic–plastic response of the small volume material to the indentation process. As the strain amplitudes increases, the mesoscopic mechanical properties (H, E, σys, and n) show increase, while the plastic energy of the indentation (Wp) exhibits a decrease process. Microstructure observations using TEM reveal that, with increasing strain amplitudes, the dislocation substructures in the material tend towards cell formation and the size of dislocation cells tend to progressively decrease. The dependence of the microstructures on the applied strain amplitude is thus responsible for the change characteristics of the mechanical properties at the mesoscopic scale of the material subjected to low-cycle fatigue loading.

Statistical Size Effect in Fatigue Properties for Mini-Specimens

Probabilistic prediction of the size effect on the fatigue strength for variable length specimens of selective laser melted 316L stainless steel

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Determination of fatigue mesoscopic mechanical properties of an austenitic stainless steel using depth-sensing indentation (DSI) technique

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Size effect on fatigue performance of SLM-ed AlSi10Mg alloy: Role of defect size distribution

Probabilistic and defect tolerant fatigue assessment of AM materials under size effect

An Approach to Estimate the Low Cycle Fatigue Probabilistic Curves of PBF-LB/M 316L Steel from Small Size Datasets Using the Remora Optimization Algorithm

Statistical Analysis Methods of Fatigue Crack Growth Rate

Size Effect on the Fatigue Performance of 18CrNiMo7‐6 Alloy Steel

Probabilistic fatigue modelling of metallic materials under notch and size effect using the weakest link theory

Influence of the Scatter Index of Non-Metallic Inclusions in Structural Steel on the Fatigue Resistance Coefficient

Probabilistic fatigue evaluation of notched specimens considering small sample properties under multiaxial loading

Defect tolerant fatigue assessment of AM materials: Size effect and probabilistic prospects

A new probabilistic control volume scheme to interpret specimen size effect on fatigue life of additively manufactured titanium alloys

Effect of grain size on fatigue strength of 304 stainless steel

Statistical analysis of the effect of micro-defect size on the low cyclic fatigue and creep fatigue response of 316FR stainless steel using crystal plasticity finite element method

Influence of Inclusion Size on Fatigue Behavior of High Strength Steels in the Gigacycle Fatigue Regime

Investigations of Size Effects in Tensile Tests Based on a Nonlocal Micro-Mechanical Damage Model

The Influence of the Ratio of Circumference to Cross-Sectional Area of Tensile Bars on the Fatigue Life of Additive Manufactured AISI 316L Steel

Probabilistic fatigue assessment of notched components under size effect using generalized weakest-link model