Abstract:The main purpose of this study is to determine, via a three dimensions Finite Element analysis (FE), the stress and strain fields at the inner surface of a tubular specimen submitted to thermo-mechanical fatigue. To investigate the surface finish effect on fatigue behaviour at this inner surface, mechanical tests were carried out on real size tubular specimens under various thermal loadings. X ray measurements, Transmission Electron Microscopy observations and micro-hardness tests performed at and under the inner surface of the specimen before testing, revealed residual internal stresses and a large dislocation microstructure gradient in correlation with hardening gradients due to machining. A memory effect, bound to the pre-hardening gradient, was introduced into an elasto-visco-plastic model in order to determine the stress and strain fields at the inner surface. The temperature evolution on the inner surface of the tubular specimen was first computed via a thermo-elastic model and then used for our thermo-mechanical simulations. Identification of the thermo-mechanical model parameters was based on the experimental stabilized cyclic tension-compression tests performed at 20^{\circ}C and 300^{\circ}C. A good agreement was obtained between numerical stabilized traction-compression cycle curves (with and without pre-straining) and experimental ones. This 3 dimensional simulation gave access to the evolution of the axial and tangential internal stresses and local strains during the tests. Numerical results showed: a decreasing of the tangential stress and stabilization after 40 cycles, whereas the axial stress showed weaker decreasing with the number of cycles. The results also pointed out a ratcheting and a slightly non proportional loading at the inner surface. The computed mean stress and strain values of the stabilized cycle being far from the initial ones, they could be used to get the safety margins of standard design related to fatigue, as well as to get accurate loading conditions needed for the use of more advanced fatigue analysis and criteria.

Effect of grain size on fatigue strength of 304 stainless steel

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Multi‐scale Fatigue Crack Propagation in 304 Stainless Steel: Experiments and Modelling

Effects of Grain Size on Mechanical Properties and Work‐Hardening Behavior of AISI 304 Austenitic Stainless Steel

Specimen Dimension and Grain Size Effects on Deformation Behavior in Micro Tensile of Sus304 Stainless Steel Foil

Quantitative analysis of strength and plasticity of a 304 stainless steel based on the stress-strain curve

Size Effect in Stainless Steel Thin Wires under Tension

Fatigue Behaviors and Life Evaluation of AISI304 Stainless Steel under Non-Proportional Multiaxial Random Loading

Thermo-mechanical FE model with memory effect for 304L austenitic stainless steel presenting microstructure gradient

Achieving Excellent Strength–Ductility Synergy by Tailoring the Grain Size Distribution in a Metastable Austenitic Stainless Steel

Small fatigue crack growth mechanisms of 304 stainless steel under different stress levels

Revealing the Roles of Martensitic Transformation in Affecting the Fatigue Resistance of Austenitic Stainless Steel with Heterogeneous Grain Size Distribution

Statistical analysis of the effect of micro-defect size on the low cyclic fatigue and creep fatigue response of 316FR stainless steel using crystal plasticity finite element method

Effects of grain refinement on the quasi-static compressive behavior of AISI 321 austenitic stainless steel: EBSD, TEM, and XRD studies

The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature

Creep–fatigue Endurance of 304 Stainless Steels

Establishment of Unified Creep–fatigue Life Prediction under Various Temperatures and Investigation of Failure Physical Mechanism for Type 304 Stainless Steel

Fatigue and tensile deformation behaviors of laser powder bed fused 304L austenitic stainless steel