Abstract:Abstract Additive manufacturing (AM) is a developing manufacturing technology, which provides excellent attributes compared to other manufacturing techniques. However, one of the critical challenges is the presence of defects that hinder the mechanical properties of the parts, particularly the fatigue life. Experimental understanding of fatigue is a cumbersome process. Therefore, numerical prediction based on specified conditions (such as porosity and applied load) can be an alternative to experimental analysis at the design stage of AM parts. In this study, elastic–plastic finite element analysis (FEA) is performed to obtain the stress distribution around pores, and their resultant effect on fatigue life for L-PBF (laser powder bed fusion) produced AlSi10Mg alloy samples. The stress field is calculated for both single and multiple pore models, where stress concentration is evaluated as a function of the pore’s location and its size. It is found that both pore location and size affect the stress field; however, location effects dominate over pore size. For the same remote applied stress level, the stress concentration around the pore increases with an increase in pore size, and the local maximum stress occurs near the pores that are closest to the surface. The current study also evaluates the relative effect of porosity fraction, average pore size, and location. It is found that the magnitude and sensitivity of stress concentration are hierarchically controlled by porosity location, pore size, and porosity density. A multi-scale finite element (FE) model is proposed based on inherent porosity data measured using Computed Tomography (CT) to predict overall fatigue life. The fatigue cycles are calculated using the rainflow counting algorithm in FE Safe using the stress–strain data obtained from the proposed FEA model. Using the proposed model, it is possible to generate S–N curves for any loading condition for a given porosity condition (porosity density and average pore size). The S–N curve results obtained from the FE model are compared to the experimental observations. The predicted fatigue life shows approximately 5% error with experimental results at high stress loading conditions. However, the proposed model overpredicts the fatigue life at low stress loading by almost 30%.

Size effect on fatigue performance of SLM-ed AlSi10Mg alloy: Role of defect size distribution

The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion

Defect tolerant fatigue assessment of AM materials: Size effect and probabilistic prospects

Study on Small Fatigue Crack Growth Rate of SLM AlSi10Mg Alloy

Evaluation of Size Effect in Low Cycle Fatigue for Q&T Rotor Steel

In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy

Probabilistic and defect tolerant fatigue assessment of AM materials under size effect

Size Effect on the Fatigue Performance of 18CrNiMo7‐6 Alloy Steel

Role of defects on the high cycle fatigue behavior of selective laser melted Al–Mg–Sc–Zr alloy

Microstructural size effect on the notch fatigue behavior of a Ni-based superalloy using crystal plasticity modelling approach

Influence of Inclusion Size on Fatigue Behavior of High Strength Steels in the Gigacycle Fatigue Regime

Analysing the effect of defects on stress concentration and fatigue life of L-PBF AlSi10Mg alloy using finite element modelling

Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress

Energy Field Intensity Approach for Probabilistic Notch Fatigue Assessment under Size Effect

Evaluation of Size Effect on Strain-Controlled Fatigue Behavior of a Quench and Tempered Rotor Steel: Experimental and Numerical Study

Grain Size Effect on Multi-Scale Fatigue Crack Growth Mechanism of Nickel-based Alloy GH4169

Size effects in fatigue crack growth in confined volumes: A microbending case study on nc Ni

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

Recent advances on size effect in metal fatigue under defects: a review

Fatigue Life Prediction of Notched Components under Size Effect Using Critical Distance Theory

Size effect in fatigue modelling of defective materials: Application of the calibrated weakest-link theory