Abstract:Metal halide perovskite solar cells (PSCs) have undergone rapid progress. However, unstable performance caused by sensitivity to environmental moisture and high temperature is a major impediment to commercialization of PSCs. In the present work, a low-temperature, glass-glass encapsulation technique using high performance polyisobutylene (PIB) as the moisture barrier is investigated on planar glass/FTO/TiO2/FAPbI3/PTAA/gold perovskite solar cells. PIB was applied as either an edge seal or blanket layer. Electrical connections to the encapsulated PSCs were provided by either the FTO or Au layers. Results of a "calcium test" demonstrated that a PIB edge-seal effectively prevents moisture ingress. A shelf life test was performed and the PIB-sealed PSC was stable for at least 200 days. Damp heat and thermal cycling tests, in compliance with IEC61215:2016, were used to evaluate different encapsulation methods. Current-voltage measurements were performed regularly under simulated AM1.5G sunlight to monitor changes in PCE. The best results we have achieved to date maintained the initial efficiency after 540 h of damp heat testing and 200 thermal cycles. To the best of the authors' knowledge, these are among the best damp heat and thermal cycle test results for perovskite solar cells published to date. Given the modest performance of the cells (8% averaged from forward and reverse scans) especially with the more challenging FAPbI3 perovskite material tested in this work, it is envisaged that better stability results can be further achieved when higher performance perovskite solar cells are encapsulated using the PIB packaging techniques developed in this work. We propose that heat rather than moisture was the main cause of our PSC degradation. Furthermore, we propose that preventing the escape of volatile decomposition products from the perovskite solar cell materials is the key for stability. PIB encapsulation is a very promising packaging solution for perovskite solar cells, given its demonstrated effectiveness, ease of application, low application temperature, and low cost.

Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Evaluation of the underwater stability of encapsulated perovskite solar cells

Room temperature nondestructive encapsulation via self-crosslinked fluorosilicone polymer enables damp heat-stable sustainable perovskite solar cells

Encapsulation for long-term stability enhancement of perovskite solar cells

Nondestructive Single‐Glass Vacuum Lamination Encapsulation for Perovskite Solar Cells with Long‐Term Stability

Modulation of perovskite degradation with multiple-barrier for light-heat stable perovskite solar cells

Low-temperature strain-free encapsulation for perovskite solar cells and modules passing multifaceted accelerated ageing tests

Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization

Resist Thermal Shock Through Viscoelastic Interface Encapsulation in Perovskite Solar Cells

Microencapsulated Perovskite Crystals via In‐Situ Permeation Growth from Polymer Microencapsulation‐Expansion‐Contraction Strategy: Advancing A Record Long‐Term Stability Beyond 10,000 Hours for Perovskite Solar Cells

Thermal Stability of Encapsulated Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells Extended to Over 5000 h at 85 °C

Internal Encapsulation Enables Efficient and Stable Perovskite Solar Cells

Progress on the stability and encapsulation techniques of perovskite solar cells

Encapsulation and Stability Testing of Perovskite Solar Cells for Real Life Applications

Effective Encapsulation and Surface Treatment for Damp‐Heat Stable Triple Cation Perovskite Solar Cells

Encapsulation of Printable Mesoscopic Perovskite Solar Cells Enables High Temperature and Long‐Term Outdoor Stability

Encapsulation of UV Glue, Hydrophobicity of Binder and Carbon Electrode Enhance the Stability of Organic–Inorganic Hybrid Perovskite Solar Cells up to 5 Years

Enhancing the Stability of Perovskite Solar Cells with a Multilayer Thin-Film Barrier

Accelerated Lifetime Testing of Organic-Inorganic Perovskite Solar Cells Encapsulated by Polyisobutylene