Abstract:The key to the practical application of organometal–halide crystals perovskite solar cells (PSCs) is to achieve thermal stability through robust encapsulation. This paper presents a method to significantly extend the thermal stability lifetime of perovskite solar cells to over 5000 h at 85 °C by demonstrating an optimal combination of encapsulation methods and perovskite composition for carbon-based multiporous-layered-electrode (MPLE)-PSCs. We fabricated four types of MPLE-PSCs using two encapsulation structures (over- and side-sealing with thermoplastic resin films) and two perovskite compositions ((5-AVA)x(methylammonium (MA))1−xPbI3 and (formamidinium (FA))0.9Cs0.1PbI3), and analyzed the 85 °C thermal stability followed by the ISOS-D-2 protocol. Without encapsulation, FA0.9Cs0.1PbI3 exhibited higher thermal stability than (5-AVA)x(MA)1−xPbI3. However, encapsulation reversed the phenomenon (that of (5-AVA)x(MA)1−xPbI3 became stronger). The combination of the (5-AVA)x(MA)1−xPbI3 perovskite absorber and over-sealing encapsulation effectively suppressed the thermal degradation, resulting in a PCE value of 91.2% of the initial value after 5072 h. On the other hand, another combination (side-sealing on (5-AVA)x(MA)1−xPbI3 and over- and side-sealing on FA0.9Cs0.1PbI3) resulted in decreased stability. The FACs-based perovskite was decomposed from these degradation mechanisms by the condensation reaction between FA and carbon. For side-sealing, the space between the cell and the encapsulant was estimated to contain approximately 1,260,000 times more H2O than in over-sealing, which catalyzed the degradation of the perovskite crystals. Our results demonstrate that MA-based PSCs, which are generally considered to be thermally sensitive, can significantly extend their thermal stability after proper encapsulation. Therefore, we emphasize that finding the appropriate combination of encapsulation technique and perovskite composition is quite important to achieve further device stability.

Encapsulation of UV Glue, Hydrophobicity of Binder and Carbon Electrode Enhance the Stability of Organic–Inorganic Hybrid Perovskite Solar Cells up to 5 Years

Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization

Evaluation of the underwater stability of encapsulated perovskite solar cells

Microencapsulated Perovskite Crystals via In‐Situ Permeation Growth from Polymer Microencapsulation‐Expansion‐Contraction Strategy: Advancing A Record Long‐Term Stability Beyond 10,000 Hours for Perovskite Solar Cells

Internal Encapsulation Enables Efficient and Stable Perovskite Solar Cells

Internal Encapsulation for Lead Halide Perovskite Films for Efficient and Very Stable Solar Cells

Stability-enhanced perovskite heterointerfaces and solar cells via strongly anchored and sterically hindered ligands

Planar perovskite solar cells with long-term stability using ionic liquid additives

Achieving Long‐Term Operational Stability of Perovskite Solar Cells with a Stabilized Efficiency Exceeding 20% after 1000 h

Enhancing the Stability of Perovskite Solar Cells with a Multilayer Thin-Film Barrier

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Nondestructive Single‐Glass Vacuum Lamination Encapsulation for Perovskite Solar Cells with Long‐Term Stability

Thermal Stability of Encapsulated Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells Extended to Over 5000 h at 85 °C

Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites

Mechanical and Ionic Characterization for Organic Semiconductor‐Incorporated Perovskites for Stable 2D/3D Heterostructure Perovskite Solar Cells

How Ammonium Valeric Acid Iodide Additive Can Lead to More Efficient and Stable Carbon‐Based Perovskite Solar Cells: Role of Microstructure and Interfaces?

Facile and scalable bilayer polymer encapsulation to achieve long-term stability of perovskite solar cells under harsh humidity conditions

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Crystalline Intermarriage of Hybrid Organic–Inorganic Halide Perovskite and Epoxide: Enhanced Stability and Modified Optical Properties

Synergistic Passivation and Down‐Conversion by Imidazole‐Modified Graphene Quantum Dots for High Performance and UV‐Resistant Perovskite Solar Cells

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation