Abstract:The flow stress of face-centered cubic (FCC) metals exhibits a rapid increase near a strain rate of 104 s-1 under fixed-strain conditions. However, many existing constitutive models either fail to capture the mechanical characteristics of this plastic deformation or use piecewise strain-rate hardening models to describe this phenomenon. Unfortunately, these piecewise models may suffer from issues such as discontinuity of physical quantities and difficulties in determining segment markers, and struggle to reflect the underlying physical mechanisms that give rise to this mutation phenomenon. In light of this, this paper proposes that the abrupt change in flow stress sensitivity to strain rate in FCC metals can be attributed to microstructural evolution characteristics. To address this, a continuous semiempirical physical constitutive model for FCC metals is established based on the microstructural size evolution proposed by Molinari and Ravichandran and the dislocation motion slip mechanism. This model effectively describes the mutation behavior of strain-rate sensitivity under fixed strain, particularly evident in an annealed OFHC. The predicted results of the model across a wide range of strain rates (10-4-106 s-1) and temperatures (77-1096 K) demonstrate relative errors generally within ±10% of the experimental values. Furthermore, the model is compared with five other models, including the mechanical threshold stress (MTS), Nemat-Nasser-Li (NNL), Preston-Tonks-Wallace (PTW), Johnson-Cook (JC), and Molinari-Ravichandran (MR) models. A comprehensive illustration of errors reveals that the proposed model outperforms the other five models in describing the plastic deformation behavior of OFHC. The error results offer valuable insights for selecting appropriate models for engineering applications and provide significant contributions to the field.

Uncertainty and statistics of dislocation-oxide interactions on strength and creep failure of oxide dispersion strengthened steels

Molecular Dynamics Simulation Study on the Possible Factors Affecting Stability of ODS Steel

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Achieving high strength and ductility in ODS-W alloy by employing oxide@W core-shell nanopowder as precursor

Beyond Orowan hardening: Mapping the four distinct mechanisms associated with dislocation-precipitate interaction

Immobilization of Dislocations by Oxygen Precipitates in Czochralski Silicon: Feasibility of Precipitation Strengthening Mechanism

Softening mechanism and failure behavior of 9Cr oxide dispersion strengthened steel resistance spot welded joint

Dissolution zone model of the oxide structure in additively manufactured dispersion-strengthened alloys

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

In Situ Observation of the Atomic-scale High-temperature Phase Transition Enhancement Mechanism at the ODS-W Interface

On the influence of grain morphology on creep deformation and damage mechanisms in directionally solidified and oxide dispersion strengthened superalloys

Effect of Zr and Al Addition on Nanocluster Formation in Oxide Dispersion Strenghthened Steel-an ab initio Study

Constitutive Modeling of Annealed OFHC with Wide Strain-Rate and Temperature Effects: Incorporating Dislocation Dynamics and Normalized Microstructural Size Evolution

Residual Stress Analysis in the Oxide Scale/metal Substrate System Due to Oxidation Growth Strain and Creep Deformation

In-Situ Synchrotron Investigation of the Elastic and Tensile Properties of Oxide Dispersion Strengthened EUROFER97 Steel

The coupled effects of grain boundary strengthening and Orowan strengthening examined by dislocation dynamics simulations

Creep properties, microstructural evolution, and fracture mechanism of an Al added high Cr ODS steel during creep deformation at 600 °C

Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model

Strength-hardness correlations of thermal-exposed oxide dispersion strengthened nickel-based superalloy with different grain size distributions

Nanoscale Precipitates As Sustainable Dislocation Sources for Enhanced Ductility and High Strength

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing