Abstract:The wide-angle lens is widely used with the advantage of a large field of view, but it is difficult to solve the problem of large distortion. Therefore, the research on how to design a wide-angle low-distortion lens with excellent imaging quality is very meaningful. In this paper, we propose a high-performance wide-angle small distortion optical system, which has a horizontal field angle of 110 degrees and a vertical field angle of 77 degrees, focal length of 2.03mm, f number of 1.65, and a total length of 16.5mm. By introducing a non-rotational symmetric freeform surface into the last side of the wide-angle optical system and combining with several even aspheric surfaces, the f-tan(theta) distortion in the X direction is controlled to -6%similar to+1%, and the f-tan(theta) distortion in the Y direction is controlled to less than 1%. At the same time, the MTF of the system is greater than 0.35 at 125lp/mm, so that the circular image plane can better adapt to the rectangular sensor. In addition, due to the introduction of the freeform surface in the system, the change of system structure with temperature becomes more complex. We carry out thermal analysis for this surface and calculate the change of structure with temperature. Finally, we completed the athermalized design of the lens, so that the wide-angle lens can work in the range of -40 degrees C similar to+80 degrees C. This optical system has great development potential in security monitoring, UAV detection and other fields that may encounter extreme environments.

Imaging with an inverse-designed 50?mm-diameter f/1 MWIR flat lens with enhanced field of view and depth of focus

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Imaging from the Visible to the Longwave Infrared wavelengths via an inverse-designed flat lens

Inverse-designed flat lens for imaging in the visible & near-infrared with diameter > 3mm and NA=0.3

Bionic Optical Imaging System with Aspheric Solid–liquid Mixed Variable-Focus Lens

Multi-image-distance Imaging System for Extending Depth-of-field

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

Simulation Of Imaging And Refocusing For Light Field Photography

Inverse designed extended depth of focus meta-optics for broadband imaging in the visible

Computational Diffraction-Limited Imaging with a Non-Imaging Spatial Information Transfer Lens

FDTD-based Inverse Design enables f/0.27 flat Microlens Array for Integral Imaging

Inverse Design of Aberration-Corrected Hybrid Metalenses for Large Field of View Thermal Imaging Across the Entire Longwave Infrared Atmospheric Window

Imaging with High Resolution and Wide Field of View Based on an Ultrathin Microlens Array

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Compact athermalized LWIR objective lens

Broadband lightweight flat lenses for longwave-infrared imaging

Design of a Compact Off-Axis Two-Mirror Freeform Infrared Imager with a Wide Field of View

Broadband Thermal Imaging using Meta-Optics

Inverse-designed 3D laser nanoprinted phase masks to extend the depth of field of imaging systems

Design and analysis of miniature high-resolution omnidirectional gaze optical imaging system