Abstract:By reducing the working temperature of opto-mechanical structures, the infrared system signal to noise ration can be effectively improved. Normally, structures close to the focal plane radiate more noise. Signal to noise ration can be improved by cooling the opto-mechanical in front of the focal plane. In this paper, an infrared lens working at both room and low temperature is designed. The first four lenses work at room temperature and the other three lenses close to the focal plane work at 200K. The cryogenic lens is cooled by space pulse tube cryocooler. UG TMG thermal analysis results show that the working temperature of each lens meets the requirements, and the temperature gradient of each lens is less than 0.2K. Modal analysis results show that the first modal frequency is 97.2Hz. The finite element analysis results show that the maximum stress of the structure is 227.8MPa, which is far less than the allowable stress of TC4. Thermal-structure-optical analysis show that the system MTF has a small decrease from root temperature to working temperature. By adjusting the position of the focal plane, the system MTF can recover to the design results. The results of the vacuum experiment show that the working temperature of the lens is close to the simulation results. The wavefront error is measured both at room temperature and working temperature. The average wavefront error is 0.060 (=632.8nm) at working temperature and 0.070 at room temperature. Experiment results verify the correctness of the thermal design and opto-mechanical design.

Compact athermalized LWIR objective lens

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of Large Field of View and High Numerical Aperture Microscope Objective

Compact Chromatic Confocal Lens with Large Measurement Range

High-performance compact athermal panoramic annular lens design with separated radial optical power

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Design of A Panoramic Long-Wave Infrared Athermal System

Design of Infrared Hybrid Athermal Optical System

Design and testing of optical inspection lens with large-field and high resolution

Design of Athermalization for Dual-Band Infrared Optical System Based on Harmanic Diffraction

Imaging from the Visible to the Longwave Infrared wavelengths via an inverse-designed flat lens

A high numerical aperture (NA = 0.92) objective lens for imaging and addressing of cold atoms

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

Aberration Athermal Design for Infrared Search and Trace Optical System

Compact high resolution multi-aperture LWIR imaging system

Broadband lightweight flat lenses for longwave-infrared imaging

Inverse Design of Aberration-Corrected Hybrid Metalenses for Large Field of View Thermal Imaging Across the Entire Longwave Infrared Atmospheric Window

Design and experimental study for lens working at both room and low temperature

Design of infrared dual field of view optical system with long focal length and high resolution

Athermal Design And Analysis Of Glass-Plastic Hybrid Lens

Long working distance microscope with a low obscuration aspherical Schwarzschild objective.