Abstract:The natural environment in the high-altitude regions of Northwest China is extremely harsh, characterized by numerous salt lakes. The high concentrations of chloride salts, sulfates, and alkali metal ions in these areas can induce alkali–silica reactions (ASRs) in concrete. These reactions generate harmful gel within the concrete, causing expansion and cracking, which significantly impacts the durability of concrete structures. This study investigates the evolution of the mechanical properties in high-performance concrete (HPC) under long-term ASR by incorporating different admixtures and varying the equivalent alkali content. A three-dimensional random aggregate mesoscopic model was used to simulate static compression tests under various operational conditions. Non-destructive testing methods were utilized to determine the expansion rate, internal, and surface damage variables of the concrete. The experimental results indicate that the 10-year expansion rate differs from the 1-year rate by approximately 1%, and under long-term ASR mitigation measures, the internal damage in the HPC is minimal, though the surface damage is more severe. As the equivalent alkali content increases, the compressive strength of the concrete cubes decreases, initially rising before falling by 5–15% over time. The HPC with only air-entraining agent added exhibited better mechanical performance than the HPC with both air-entraining and corrosion inhibitors added, with the poorest performance observed in the HPC with only a corrosion inhibitor. A relationship was established between the surface and internal damage variables, with the surface damage initially increasing rapidly before stabilizing as the internal damage rose. Numerical simulations effectively describe the damage behavior of HPC under static uniaxial compression. Comparisons with actual failure morphologies revealed that, in the cube compression tests, crack propagation directly penetrated both coarse and fine aggregates rather than circumventing them. The simulations closely matched the experimental outcomes, demonstrating their accuracy in modeling experiments. This study discusses the compressive mechanical properties of concrete under prolonged ASR through a combination of experimental and simulation approaches. It also delves into the impact of surface damage on the overall mechanical performance and failure modes of concrete. The findings provide experimental and simulation support for the concrete structures in regions with high alkali contents.

Understanding the negative effects of alkalis on long-term strength of Portland cement

Effect of Alkali Content in Cement on Its Hydration Kinetics and Mechanical Properties

Influence of Different Alkali Sulfates on the Shrinkage, Hydration, Pore Structure, Fractal Dimension and Microstructure of Low-Heat Portland Cement, Medium-Heat Portland Cement and Ordinary Portland Cement

Investigation on the Unusual Hydration and Hardening Process of a Portland Cement with Low Alkali Sulfate Content

Advances in understanding the effect of alkanolamine in cement-based materials

Effect of Alkali Content in Cement on the Fluidity and Structural Build-Up of Plasticized Cement Pastes

Influences of the type and amount of calcium sulphate on the reactivity of alkanolamine-based set accelerators / strength improvers

Mechanical Properties and Mesoscopic Numerical Simulation of Local Weakening in High-Performance Concrete after 10 Years of Alkali Solution Immersion

Advances in understanding cement hydration mechanisms

Effects of citric acid on the rheology, hydration and strength development of alkali aluminosilicate cement

Effects of Two Oppositely Charged Colloidal Polymers on Cement Hydration

Combined effect of NaAlO2 and NaOH on the early age hydration of Portland cement with a high concentration of borate solution

Interaction between cement clinker constituents and clay minerals and their influence on the strength of cement-based stabilized soft clay

Effect of environmental pH values on phase composition and microstructure of Portland cement paste under sulfate attack

Microstructural characterization of cement in the presence of alkanolamines

The effect of a Pfa with a high total alkali content on pore solution composition and alkali silica reaction

The Impact of NaOH on the Micro-Mechanical Properties of the Interface Transition Zone in Low-Carbon Concrete

The flexural mechanical properties and mesoscopic mechanisms of fracture failure of HPC with ASR inhibition measures under prolonged alkaline solution immersion

Alkalinity and Its Consequences for the Performance of Steel-Reinforced Geopolymer Materials

The effect of meta-halloysite on alkali–aggregate reaction in concrete

Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process