Abstract:Water conservation measures are increasing in response to regulatory requirements addressing the need for lower environmental footprint and in response to water shortages. In households with lead service lines (LSLs), lowering consumption can adversely impact lead release as it will increase stagnation. Using a lead dissolution model and data from extensive pilot studies on excavated LSLs, the impact of adaptation to different water conservation strategies on dissolved lead contamination at the kitchen tap is assessed under three water qualities and three LSL lengths (3, 14 and 30 m) using hydraulic and water quality modelling. Consumers' behavioural variability is also assessed based on integration of EPANET and results of the stochastic water demand model SIMDEUM. Demand reduction increased the dissolved lead concentrations (Pbdiss) at the end of the LSL with mean values ranging from 28.4 to 63.3 μg/L (without corrosion control) and from 4.6 to 9.9 μg/L with corrosion control (addition of orthophosphate and pH adjustment). Adding orthophosphate (1 mg P/L) to the water reduces the mean Pbdiss values at the kitchen tap from 7.1 μg/L to 1.2 μg/L for a high water demand scenario and from 31.2 to 4.9 μg/L for a low water demand scenario. Finally, the Integrated Exposure Uptake Biokinetic (IEUBK) model is used to predict the potential blood lead levels (BLLs) for children aged 0-84 months. Results showed that the orthophosphate addition of only 1 mg P/L can significantly decrease the proportion of children with a BLL >5 μg/dL, from 82 % to 17 %, under the most extreme water conservation scenario studied, using the 90th percentile of Pbdiss concentrations during usage at kitchen tap. Wide variations of Pbdiss concentrations at the kitchen tap were calculated at times of use over a week (up to 155 μg/L in lower demand scenarios, without corrosion control) showing evident limitations of single random daytime sampling.

Free Chlorine Can Inhibit Lead Solder Corrosion via Electrochemical Reversal

Effect of water supply pipe wall corrosion on chlorine decay

Seasonal Fluctuations in Nitrate Levels Can Trigger Lead Solder Corrosion Problems in Drinking Water

Zinc Orthophosphate Can Reduce Nitrate-Induced Corrosion of Lead Solder

Effects of Major Anions on Iron Release in Drinking Water Supply System

Corrosion Mechanism of Zn-30Sn High-Temperature, Lead-Free Solder in Neutral NaCl Solution

Metallurgical pathways of lead leaching from brass

Generation of Tin(II) Oxide Crystals on Lead-Free Solder Joints in Deionized Water

Predictive Model of Corrosion Kinetics for Lead-Free Solder in Polyvinyl Chloride Fire Smoke Environment

Reduction in water consumption in premise plumbing systems: Impacts on lead concentration under different water qualities

Electrochemical Behavior Of Sn-Xzn Lead-Free Solders In Aerated Nacl Solution

Corrosion Process Study of Zn-30Sn High-Temperature Lead-Free Solder

Effects of chloride on corrosion scale compositions and heavy metal release in drinking water distribution systems

Fate of free chlorine in drinking water during distribution in premise plumbing

Effect of Temperature on Electrochemical Corrosion of Zn-30Sn Lead-Free Solder

Electrochemical Behavior of Zn-xSn High-Temperature Solder Alloys in 0.5 M NaCl Solution

Electrochemical Behavior of Sn-9Zn-xTi Lead-Free Solders in Neutral 0.5M NaCl Solution

Kinetics of lead(IV) oxide (PbO2) reductive dissolution: role of lead(II) adsorption and surface speciation

Effect of Chloramine Residual on Iron Release in Drinking Water Distribution Systems

Effects of Varying Temperatures and Alkalinities on the Corrosion and Heavy Metal Release from Low-Lead Galvanized Steel