Abstract:Patients with stroke and other neurological disorders like trauma, multiple sclerosis (MS) experience different lower limb disabilities due to various damages in neuromuscular system. Orthotic devices are prescribed to compensate muscle weakness, prevent unwanted movement of the impaired limb. Design and manufacturing methods of lower limb orthoses involve manual techniques e.g. casting and moulding of the limbs to be treated, vacuum forming etc. Such methods are time consuming, require skilful labour and often based on trial and error rather than systematic engineering and evidence based principles. In recent years, 3D scanning and reconstruction of medical images facilitate making 3D computer models of lower limb, which allows computer aided design (CAD) tools to be incorporated in orthotic design. All these approaches rely on the external model of lower limb and limited to single piece plastic ankle foot orthosis (AFO) only. To design orthosis with articulated joint, precise alignment of anatomical joint and mechanical axis is necessary. However, it is difficult to infer joint axes from external models as it is partially specified by skeletal structure. In our research, a design approach for custom knee ankle foot orthosis and ankle foot orthosis with commercially available joints has been demonstrated, which involves skeletal structure of lower limb for locating anatomical axes to ensure accurate alignment of orthotic mechanical joint. CAD models of the orthotic components were developed based on the 3D models of a healthy subject’s lower limb, which were developed through 3D reconstruction. Components of the orthotics were fabricated by rapid prototyping and machining to demonstrate the new approach. The fabricated orthoses were evaluated by a certified orthotist and the performance of the custom made AFO was compared statistically with a pre-fabricated AFO with similar ankle joint. The manufacturing process requires approximately 50% lesser time to develop AFO and 70% lesser time to develop KAFO compared to Brace and Limb laboratory of University Malaya. Unlike traditional approaches, the design technique facilitates exact positioning of articulated joint. The developed orthoses are light in weight, comfortable and easy to don and doff. Biomechanical test implies that the fabricated AFO provides better range of motion than a pre-fabricated AFO with same ankle joint. Although the custom AFO allowed significantly higher plantar flexion during pre-swing compared to pre-fabricated AFO condition (MD = 1.734, MSD = 1.55), the subject’s ankle required to generate significantly higher power with the pre-fabricated AFO (MD = 0.141, MSD = 0.035). These findings suggest that the subject had to overcome higher resistance with pre-fabricated AFO compared to custom made AFO. Simultaneous viewing of exterior and skeletal geometry might help the clinicians modify the design to enhance performance of the orthotic device.

Immunohistochemical Study of Cytokeratin Expression in Normal and Pathologic Middle Ear Mucosa of the Rat

[Changes in serum zinc levels in acute myocardial infarct].

The impact of ankle-foot orthotics on selective motor control during gait in children and adolescents with cerebral palsy

Migrating Schistosoma japonicum schistosomula induce an innate immune response and wound healing in the murine lung.

Efficacy of hinged and carbon fiber ankle-foot orthoses in children with unilateral spastic cerebral palsy and drop-foot gait pattern

Efficacy of Lower Limb Orthoses in the Rehabilitation of Children Affected by Cerebral Palsy: A Systematic Review

Effects of ankle exoskeleton assistance and plantar pressure biofeedback on incline walking mechanics and muscle activity in cerebral palsy

Early disruption of neurovascular units and microcirculatory dysfunction in the spinal cord in spinal muscular atrophy type I.

Relationship between 3D lower limb bone morphology and 3D gait variables in children with uni and bilateral Cerebral Palsy

[Incidence of hepatitis B markers in pregnancy. Comparison with the serological tests legally required for maternal care].

Can foot orthoses impose different gait features based on geometrical design in healthy subjects? A systematic review and meta-analysis

Evaluation of Optimal Control Approaches for Predicting Active Knee-Ankle-Foot-Orthosis Motion for Individuals With Spinal Cord Injury

Evaluation of the Working Mechanism of a Newly Developed Powered Ankle–Foot Orthosis

Human-Robot Joint Misalignment, Physical Interaction, and Gait Kinematic Assessment in Ankle-Foot Orthoses

A proposed evidence-guided algorithm for the adjustment and optimization of multi-function articulated ankle-foot orthoses in the clinical setting

Computer integrated design and manufacturing of patient specific lower limb orthoses through 3D reconstruction / Morshed Alam

In-silico simulations to study the effects of ankle-joint misalignments in Ankle-Foot-Orthoses during level walking

How does orthotic walker boot design influence lower limb and trunk function during gait?

[Impact of COPD therapy on patient survival: the TORCH Study (TOwards a Revolution in COPD Health)].

First Description of KPC-2-Producing Escherichia coli and ST15 OXA-48-Positive Klebsiella pneumoniae in Tunisia.

The effect of stride length on lower extremity joint kinetics at various gait speeds