Abstract:With the growing demand for lightweight and high-performance components applied in extreme aerospace environments, there is a prospective interest in producing the integrated multi-material components consisting of titanium alloy and aluminum alloy. Laser powder bed fusion (LPBF), as a laser powder bed based additive manufacturing process with a high production flexibility, shows a promising potential in creating multi-material components. However, due to the possibility of the generation of various intermetallic compounds (IMCs) at the interface, it has been a significant challenge to fabricate reliable Ti/Al alloy multi-material components without any crack formation by LPBF. In this study, the Ti6Al4V/AlMgScZr multi-material parts were fabricated by LPBF and the effects of building parameters of AlMgScZr on the residual stress and crack control of Ti6Al4V/AlMgScZr multi-material parts were investigated. The evolution mechanisms of IMC phases at the interface under laser interaction were further revealed. Due to the change of elemental compositions and difference in Gibbs free energies of IMCs, a gradient ordered transition zone with a width of about 450 μm consisting of Al 3 Ti, TiAl, and Ti 3 Al was formed from AlMgScZr to Ti6Al4V. A finite element model was established to explain the effects of process parameters on residual stress evolution, cracking formation and its control. As the scan speed increased from 500 to 1100 mm/s and the attendant building height of AlMgScZr increased to 60 layers, the residual stress of laser processed Ti6Al4V decreased from 439 to 364 MPa, but the residual stress of AlMgScZr increased from 195 to 303 MPa. As the applied scan speed was enhanced to process AlMgScZr, the element diffusion was mitigated, thereby reducing the formation of IMCs and stress concentration. This study shows the possibility of in-situ control of IMCs and residual stress by process optimization during LPBF preparation of titanium alloy/aluminum multi-material parts without crack formation.

Interval Island Laser-Scanning Strategy of Ti–6Al–4V Part Additively Manufactured for Anisotropic Stress Reduction

In-situ control of residual stress and its distribution in a titanium alloy additively manufactured by laser powder bed fusion

Residual stress reduction in Ti-6Al-4V parts fabricated by laser-foil-printing process

Effect of Composite Scanning Strategy on Forming Quality, Microstructure, and Tensile Properties of Laser Powder Bed Fusion Titanium Alloy

Novel Strategy for Reducing Residual Stress in Titanium Alloy Parts Obtained via Additive Manufacturing

Implemented in-situ heat treatment process for controlling the residual thermal stresses during the fabrication of Ti-6Al-4V titanium alloy through additive manufacturing

The effect of process parameters on the stability and efficiency in the laser powder bed fusion of Ti-6Al-4 V based on the interval powder layer thickness

Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion

X-ray diffraction measurements and computational prediction of residual stress mitigation scanning strategies in powder bed fusion additive manufacturing

The influence of building parameters on residual stress, interfacial structure, and cracking control of laser powder bed fusion processed Ti6Al4V/AlMgScZr multi-material parts

Influences of island size on the forming quality, microstructure, and tensile properties of laser powder bed fusion Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy

Reduction of residual stress in porous Ti6Al4V by in situ double scanning during laser additive manufacturing

Overlap ratio and scanning strategy effects on laser powder bed fusion Ti6Al4V: numerical thermal modeling and experiments

The effect of rescanning strategy on residual stress and deformation of laser-based powder bed fusion of 316L stainless steel thin-walled parts

In Situ Microstructure Modification Using a Layerwise Surface-Preheating Laser Scan of Ti-6Al-4V during Laser Powder Bed Fusion

Research Viewpoint on Performance Enhancement for Very-High-Cycle Fatigue of Ti-6Al-4V Alloys via Laser-Based Powder Bed Fusion

Study on the organization and properties of Ti–6Al–4 V fabricated by laser powder bed fusion based on the thickness of the gradient layer

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion

Experimental and Crystal Plasticity Finite Element Investigations of Plastic Anisotropy in Additively Manufactured Ti6Al4V Alloy