Abstract:The accurate simulation of moisture transport in cement-based materials is an important step to predict many durability processes of concrete structures. This paper studied the effects of boundary conditions on modeling moisture transport, in particular for simulating drying kinetics and the inverse determination of liquid water permeability. Three boundary conditions were investigated, namely, the Dirichlet (imposed) condition, the flux boundary condition, and the boundary supplied by moisture movement in the ambient environment (coupling with a convection-diffusion moisture transport model). By comparing with the measured drying mass loss curves (without airflow) for ordinary Portland cement pastes, we found that the Dirichlet boundary condition provides slightly better simulated drying kinetics than the flux boundary condition, while results of the coupling model are less promising. As for inversely determined liquid permeability, the studied boundary conditions lead to the max. 36% difference. If considering the airflow in the environment, both the flux boundary condition and the coupling model with computational fluid dynamics (CFD) show that the airflow does not have an effect on moisture evaporation for the studied cement-based materials, because of their low permeability, resulting in a very short initial stage of drying. Moisture evaporation for these materials is mainly controlled by the internal moisture transport. However, for materials with high permeability, the drying kinetics increase with the airflow velocity because the initial stage of drying becomes much longer than the low permeable materials. The implication is that some laboratory methods for drying cement-based materials (specimens stored in a sealed chamber without airflow) may need to be reevaluated because the relative humidity at the material surface is different from the controlled relative humidity.

Models for liquid relative permeability of cementitious porous media at elevated temperature: comparisons and discussions

Unified Determination of Relative Molecular Diffusivity and Fluid Permeability for Partially Saturated Cement-Based Materials

Diffusivity of Liquid Mixture Confined in Silicate Pore by Molecular Dynamic Simulation

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Model for Hydration Heat of Cement in Concrete and Its Application

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Numerical Simulation of Chloride Penetration in Concrete in Rapid Chloride Migration Tests

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

Aspects of Permeability in Modelling of Concrete Exposed to High Temperatures

Gas Permeability and Electrical Conductivity of Structural Concretes: Impact of Pore Structure and Pore Saturation

Numerical simulation of the freezing process of concrete

Microscopic modelling of gas diffusivity in unsaturated cementitious materials considering multiple diffusion regimes

Concrete Gas Permeability from Different Methods: Correlation Analysis

Effects of model boundary conditions on simulated drying kinetics and inversely determined liquid water permeability for cement-based materials

Modeling Anomalous Moisture Transport in Cement-Based Materials with Kinetic Permeability

A Numerical Model for Permeability of Cement Mortar Considering the Interfacial Transition Zone

Intrinsic Permeability Evolution in High Temperature Concrete: An Experimental and Numerical Analysis

Influence of gas hydrate saturation and pore habits on gas relative permeability in gas hydrate-bearing sediments: Theory, experiment and case study

Novel Shale Permeability Model Considering the Internal Dependencies of Effective Stress, Gas Sorption, and Flow-Regime Effects

Thermal–physical properties of selected geomaterials: coal, sandstone and concrete based on basic series and parallel models