Abstract:Monolithic distributed Bragg reflector (DBR) cavity which directly integrates fiber Bragg gratings (FBGs) into the photosensitive RE-doped fibers is a promising configuration in constructing compact and efficient single frequency fiber lasers (SFFLs). Yet, the doping level of rare-earth (RE) ions has generally to be sacrificed in the classical Ge-photosensitized RE-doped silica fibers because of the dramatic refractive index increase caused by the introduction of Ge. Here, we demonstrate an approach to realize the trade-off between photosensitivity and RE doping concentration. We validate that the addition of a small amount of cerium (0.37wt.%) instead of Ge could photosensitize Yb3+-doped silica fiber (YDF), while maintaining fiber numerical aperture (NA) at 0.12 under a high 2.5-wt.% Yb doping level. Based on the short monolithic DBR cavity constructed by this germanium-free photosensitive highly YDF, a 1064 nm fiber laser with a 48.6% slope efficiency and an over 200 mW power on two orthogonally polarized modes could be realized. Further stable and linear-polarized 1064 nm SFFL is also demonstrated in a designed monolithic polarization maintaining cavity with an output power of 119 mW and an efficiency of 26.4%. Our results provide an alternative way to develop photosensitive highly RE-doped fibers towards monolithic laser cavity application.

Distributed Bragg reflector fiber laser directly written in a composite fiber manufactured by melting phosphate glass in a silica tube

Distributed Bragg Reflector Laser Based on Composite Fiber Heavily Doped with Erbium Ions

Short monolithic dual-wavelength single-longitudinal-mode DBR phosphate fiber laser

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

Single-frequency random distributed Bragg reflector fiber laser

Single-frequency DBR lasing by integrating FBGs into germanium-free photosensitive highly Yb3+-doped silica fibers

Short 17-cm DBR Raman Fiber Laser With a Narrow Spectrum

Single-frequency DBR Nd-doped fiber laser at 1120 nm with a narrow linewidth and low threshold

Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point technique

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Tunable Single-Frequency Ytterbium-Doped Fiber BDR Laser

High-Power Single-Frequency Thulium-Doped Fiber DBR Laser at 1943 nm

1.5 μm polarization-maintaining dual-wavelength single-frequency distributed Bragg reflection fiber laser with 28 GHz stable frequency difference

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

Dual-Wavelength Distributed Bragg Reflector Semiconductor Laser Based on A Composite Resonant Cavity

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

Single-frequency fiber laser of 315 mW at 1940 nm based on a Tm : YAG/Ho : YAG-co-derived silica fiber

High-efficiency sub-watt in-band-pumped single-frequency DBR Tm3+-doped germanate fiber laser at 1950 nm

High temperature resistant ultra-short DBR Yb-doped fiber laser