Abstract:A new method has been developed for the correction of the distortions and/or enhanced phase differentiation in Electron Backscatter Diffraction (EBSD) data. Using a multi-modal data approach, the method uses segmented images of the phase of interest (laths, precipitates, voids, inclusions) on images gathered by backscattered or secondary electrons of the same area as the EBSD map. The proposed approach then search for the best transformation to correct their relative distortions and recombines the data in a new EBSD file. Speckles of the features of interest are first segmented in both the EBSD and image data modes. The speckle extracted from the EBSD data is then meshed, and the Covariance Matrix Adaptation Evolution Strategy (CMA-ES) is implemented to distort the mesh until the speckles superimpose. The quality of the matching is quantified via a score that is linked to the number of overlapping pixels in the speckles. The locations of the points of the distorted mesh are compared to those of the initial positions to create pairs of matching points that are used to calculate the polynomial function that describes the distortion the best. This function is then applied to un-distort the EBSD data, and the phase information is inferred using the data of the segmented speckle. Fast and versatile, this method does not require any human annotation and can be applied to large datasets and wide areas. Besides, this method requires very few assumptions concerning the shape of the distortion function. It can be used for the single compensation of the distortions or combined with the phase differentiation. The accuracy of this method is of the order of the pixel size. Some application examples in multiphase materials with feature sizes down to 1 $\mu$m are presented, including Ti-6Al-4V Titanium alloy, Rene 65 and additive manufactured Inconel 718 Nickel-base superalloys.

Pattern matching analysis of electron backscatter diffraction patterns for pattern centre, crystal orientation and absolute elastic strain determination - accuracy and precision assessment

Indexing Electron Backscatter Diffraction Patterns with a Refined Template Matching Approach

An iterative method for reference pattern selection in high resolution electron backscatter diffraction (HR-EBSD)

Accuracy assessment of crystal orientation indexations by EBSD

Calibration of crystal orientation and pattern center of EBSD using integrated digital image correlation

Measurement of the pattern shifts for HR-EBSD with larger lattice rotations

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Enhanced EBSD calibration accuracy based on gradients of diffraction patterns

Improved EBSD indexation accuracy by considering energy distribution of diffraction patterns

Investigation of Medium to High Strain Deformation Microstructures Using an Automated Electron Backscattering Pattern (EBSP) System

Accurate reconstruction of EBSD datasets by a multimodal data approach using an evolutionary algorithm

EBSD and TKD analyses using inverted contrast Kikuchi diffraction patterns and alternative measurement geometries

Determining dislocation cell sizes for high-strain deformation microstructures using the EBSP technique

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

Mapping of lattice distortion in martensitic steel-Comparison of different evaluation methods of EBSD patterns

A review of EBSD: from rudimentary on line orientation measurements to high resolution elastic strain measurements over the past 30 years.

Indexation of electron diffraction patterns at grain boundaries

Method for acquiring accurate coordinates of the source point in electron backscatter diffraction

Compressive Electron Backscatter Diffraction Imaging

Correction of Electron Back-scattered Diffraction datasets using an evolutionary algorithm

Two-Dimensional Strain Mapping with Scanning Precession Electron Diffraction: An Investigation into Data Analysis Routines