Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

Ultrahigh fuel utilization in polymer electrolyte fuel cells – Part II: A modeling study

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Large-scale Simulation of Polymer Electrolyte Fuel Cells by Parallel Computing

Model of Two-Phase Flow and Flooding Dynamics in Polymer Electrolyte Fuel Cells

Electron Transport in PEFCs

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: A three-dimensional full-scale modeling study

Investigation of a Cost-Effective Strategy for Polymer Electrolyte Membrane Fuel Cells: High Power Density Operation

Numerical Study of Water Transport and Operating Strategy for Fuel Cells with Segmented Water Management Flow Fields

The Optimization of PEM Fuel Cell Performance Using the CFD Method Combined with Experimental Validation

Uncoupling Characteristics Of Temperature And Relative Humidity Distribution In A Commercial-Size Polymer Electrolyte Membrane Fuel Cell

Modeling Analysis of Polymer Electrolyte Membrane Fuel Cell with Regard to Oxygen and Charge Transport under Operating Conditions and Hydrophobic Porous Electrode Designs

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates

Mesoscopic modeling of two-phase behavior and flooding phenomena in polymer electrolyte fuel cells

Anode purge management for hydrogen utilization and stack durability improvement of PEM fuel cell systems

Optimization strategies to mitigate reactant starvation in a dead-ended hydrogen–oxygen proton exchange membrane fuel cell during cyclic loading

Performance Enhancement of Polymer Electrolyte Membrane Fuel Cells with a Hybrid Wettability Gas Diffusion Layer

Cross-dimensional Multi-Physics Model and Two-Phase Mass-Transport Enhancement for the Hydrogen Peroxide-Based Fuel Cell

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Numerical Modeling and Performance Prediction of Water Transport for PEM Fuel Cell

A Scalable and Robust Water Management Strategy for PEMFCs: Operando Electrothermal Mapping and Neutron Imaging Study