Effect of ceria–silica-based synthesized catalyst in a CI engine exhaust system operating with plastic oil blend

Premkumar Subramanian,Balaji Gnanasikamani

DOI: https://doi.org/10.1177/09544089241234486

2024-03-16

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering

Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. This study investigates the impact of ceria–silica (Ce–Si)-based catalyst integrated in the catalytic converter (CC) on the compression ignition (CI) engine's exhaust manifold. The synthesis catalyst, Ce–Si was developed with the solvothermal method and aged for 4 h at 55°C. Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscope, thermogravimetric analysis, energy dispersive X-ray spectroscopy and transmission electron microscopy analyses were carried out to conclude the synthesis of the catalyst. The catalyst performance of the CC was tested for the emission behavior of nitrogen oxides (NOx), carbon monoxide (CO), hydrocarbon (HC) and smoke. A custom-built CC was installed on the test engine's exhaust manifold. The synthesis catalyst was installed in the engine exhaust route of the stationary single-cylinder diesel engine to conduct the study. To determine the effect of the synthesis catalyst on the exhaust manifold to test both diesel and DPB (B50) fuel with and without CC. Under maximum load conditions, the presence of CC reduced oxide of nitrogen and carbon monoxide emissions by 23% and 17%, respectively, compared to diesel. The synthesized aerogel catalyst has a low density and a high surface area relative to its volume. Ce–Si aerogel catalyst can be used to improve the conversion efficiency of nitric oxide (NO), unburned hydrocarbon and CO in the three-way CC.

engineering, mechanical