Abstract:As a viable wastewater treatment and energy recovery technology, microbial fuel cell (MFC) requires more research with regard to the simultaneous achievement of high-quality effluent and high power generation. In this study, a novel flow-through carbon-based composite anode configuration is proposed, which combines the carbon cloth of two-dimensional anode with wooden granular activated carbon of three-dimensional anode. The proposed configuration enhances the performance of power production and chemical oxygen demand degradation by promoting the mass transfer, reducing internal resistance and increasing bioburden. Microbial fuel cell with the composite anode exhibited the highest maximum power density (1300 +/- 50 mW m(-2)) and the highest chemical oxygen demand removal rate constant (0.155 +/- 0.007 h(-1)) compared with the microbial fuel cell using the carbon cloth anode (1136 +/- 46 mW m(-2) and 0.072 +/- 0.008 h(-1)) or the wooden granular activated carbon anode (1045 +/- 32 mW m(-2) and 0.129 +/- 0.009 h(-1)). Meanwhile, at a lower chemical oxygen demand concentration (about 48 mg L-1), the microbial fuel cell with the composite anode maintained a current density of 2.4 A m(-2), which is 18% higher than the wooden granular activated carbon anode (2.04 A m(-2)) and 400% higher than the carbon cloth anode (0.48 A m(-2)). The cyclic voltammetry and electrochemical impedance spectroscopy tests confirmed that the composite anodes displayed better electrochemical performance. Improving the flow rate and reducing the external resistance could effectively enhance the power production and chemical oxygen demand removal performance of microbial fuel cells, while the computational fluid dynamics simulation intuitively demonstrated the positive effect of the composite anode on chemical oxygen demand degradation. These results suggest that the flow-through composite anode provides a feasible strategy to simultaneously enhance the power generation and improve the effluent quality. (C) 2019 Elsevier Ltd. All rights reserved.

Optimization of operating conditions of miniaturize single chambered microbial fuel cell using NiWO4/graphene oxide modified anode for performance improvement and microbial communities dynamics

Performance of microbial fuel cell with graphene doped bioanode

Kinetic modeling for miniaturize single-chambered microbial fuel cell: effects of biochemical reaction on its performance

Optimizing microbial fuel cells performance: An innovative approach integrating anode materials, dual-pollutant treatment, and long-term operation

Multiparameter optimization of microbial fuel cell outputs using linear sweep voltammetry and microfluidics

Optimization of Microbial a Fuel Cell with Linear Sweep Voltammetry and Microfluidics

Lemon grass derived porous carbon impregnated with NiWO4 as anode electrocatalyst to improve energy output in single chambered microbial fuel cell

Parametric Optimization and performance assessment of polyaniline graphene-impregnated electrode-based low-cost Microbial Fuel Cell using mixed culture obtained from Canteen wastewater

Effect of carbon nanotube modified cathode by electrophoretic deposition method on the performance of sediment microbial fuel cells

Nitrogen-doped Carbon Nanotubes/reduced Graphene Oxide Nanosheet Hybrids Towards Enhanced Cathodic Oxygen Reduction and Power Generation of Microbial Fuel Cells

Electrode Modification and Optimization in Air-Cathode Single-Chamber Microbial Fuel Cells

Effect of composites based nickel foam anode in microbial fuel cell using Acetobacter aceti and Gluconobacter roseus as a biocatalysts

Performance evaluation of microbial fuel cell fabricated using green nano-graphene oxide as coating anode material

Nano-Fe3O4 Coated on Carbon Monolith for Anode Enhancement in Microbial Fuel Cells

Microbial Fuel Cells: Nanomaterials Based on Anode and Their Application

A CoFe2O4/Nb2C-MXene-Modified Anode Improved the Performance Characteristics of a Microbial Fuel Cell in Terms of Bioelectricity Generation and Water Treatment

Identification of Biofilm Formation and Exoelectrogenic Population Structure and Function with Graphene/polyanliline Modified Anode in Microbial Fuel Cell

Modification of the anodes using MoS<sub>2</sub> nanoflowers for improving microbial fuel cells performance

Coupling of Anodic and Cathodic Modification for Increased Power Generation in Microbial Fuel Cells

Optimization and Simulation of a Carbon-Based Flow-Through Composite Anode Configuration to Enhance Power Generation and Improve Effluent Quality Simultaneously for Microbial Fuel Cells

Improved electrochemical performances by Ni-catecholate-based metal organic framework grown on NiCoAl-layered double hydroxide/multi-wall carbon nanotubes as cathode catalyst in microbial fuel cells