Abstract:ABSTRACT The growth of pathogenic bacteria in moist and wet surfaces and tubing of medically relevant devices results in serious infections in immunocompromised patients. In this study, we investigated and demonstrated the successful implementation of a UV-C side-emitting optical fiber in disinfecting medically relevant pathogenic bacteria ( Pseudomonas aeruginosa and Methicillin-resistant Staphylococcus aureus [MRSA]) within tight channels of polytetrafluoroethylene (PTFE). PTFE is a commonly used material both in point-of-use (POU) water treatment technologies and medical devices (dental unit water line [DUWL], endoscope). For a 1-m-long PTFE channel, up to ≥6 log inactivation was achieved using a 1-m-long UV side-emitting optical fiber (SEOF) with continuous 16-h exposure of low UV-C radiation ranging from ~0.23 to ~29.30 μW/cm 2 . Furthermore, a linear model was used to calculate the inhibition zone constant (k`), which enables us to establish a correlation between UV dosage and the extent of inactivated surface area (cm 2 ) for surface-bound Escherichia coli on a nutrient-rich medium. The k` value for an irradiance ranging from ~150 to ~271.50 μW/cm 2 was calculated to be 0.564 ± 0.6 cm·cm 2 /mJ. This study demonstrated the efficacy of SEOFs for disinfection of medically relevant microorganisms present in medically and domestically relevant tight channels. The impact of the results in this study extends to the optimization of operational efficiency in pre-existing UV surface disinfection setups that currently operate at UV dosages exceeding the optimal levels. IMPORTANCE Germicidal UV radiation has gained global recognition for its effectiveness in water and surface disinfection. Recently, various works have illustrated the benefit of using UV-C side-emitting optical fibers (SEOFs) for the disinfection of tight polytetrafluoroethylene (PTFE) channels. This study now demonstrates its impact for disinfection of medically relevant organisms and introduces critical design calculations needed for its implementation. The flexible geometry and controlled emission of light in these UV-SEOFs make them ideal for light distribution in tight channels. Moreover, the results presented in this manuscript provide a novel framework that can be employed in various applications, addressing microbial contamination and the disinfection of tight channels.

Optimizing Metal‐Surface Water Disinfection: CFD Study on Microorganism Collision Against a Triply Periodic Minimal Surface

Optimizing Metal‐Surface Water Disinfection: CFD Study on Microorganism Collision Against a Triply Periodic Minimal Surface (Adv. Sustainable Syst. 7/2024)

Enhanced Mitigation of Membrane Fouling and Degradation of Perfluorooctanoic Acid in the Treatment of Natural Surface Water Through the Application of Dielectric Barrier Discharge/sulfite

Design and Fabrication of Broad‐Spectrum Antimicrobial Porous Metallo‐Polymeric Microsphere for Water Disinfection

Gravity-driven Multifunctional Microporous Membranes for Household Water Treatment: Simultaneous Pathogenic Disinfection, Metal Recycling, and Biofouling Mitigation

Metal–Organic Frameworks (MOFs) for Sustainable Water Disinfection: Synthesis, Characterization, and Antimicrobial Properties

Improved Ultrafiltration Performance Through Dielectric Barrier Discharge/sulfite Pretreatment: Effects of Water Matrices and Mechanistic Insights

Electrochemical Flow-Through Disinfection of Escherichia Coli Versus Staphylococcus Aureus: Identifying Impacts of Flow Patterns on Efficiency

Optimization of Microwave Induced Electrodeless Ultraviolet Disinfection Reactor Using Computational Fluid Dynamics

Clean in place (CIP) of different stainless steel geometries contaminated with Pseudomonas fluorescens

Three birds with one stone: Fe(III)-coordinated cross-linked antibiofouling cellulose composite membrane for synergistic photodynamic and Fenton-like water disinfection

Residence time and the concentration of microorganism in the ozone contactor: a CFD simulation on chamber deflectors

Mechanistic modeling of peracetic acid wastewater disinfection using computational fluid dynamics: Integrating solids settling with microbial inactivation kinetics

Peroxymonosulfate-assisted Electrolytic Oxidation/ Coagulation Combined with Ceramic Ultrafiltration for Surface Water Treatment: Membrane Fouling and Sulfamethazine Degradation

UV-C side-emitting optical fiber-based disinfection: a promising approach for infection control in tight channels

Carbon-based materials for water disinfection and heavy metals removal

Removing bacteria contaminants from raw surface water using multiple barriers pilot-scale reactor: sand filtration, activated carbon, and advanced oxidation processes

Superior Microplastic Removal and Gravity-Driven Membrane Filtration Optimization: the Role of Octadecyl-Quaternium Hybrid Coagulant and Molecular Dynamics Insights

Optimization of surface water microfiltration with hydraulic and chemically enhanced backwashing

Hydrodynamic Tearing of Bacteria on Nanotips for Sustainable Water Disinfection.

Using Micro-Patterned Surfaces to Inhibit Settlement and Biofilm Formation by Bacillus Subtilis