Abstract:Abstract State-of-the-art microfluidic systems rely on relatively expensive and bulky off-chip infrastructures. The core of a system—the microfluidic chip—requires a clean room and dedicated skills to be fabricated. Thus, state-of-the-art microfluidic systems are barely accessible, especially for the do-it-yourself (DIY) community or enthusiasts. Recent emerging technology—3D-printing—has shown promise to fabricate microfluidic chips more simply, but the resulting chip is mainly hardened and single-layered and can hardly replace the state-of-the-art Polydimethylsiloxane (PDMS) chip. There exists no convenient fluidic control mechanism yet suitable for the hardened single-layered chip, and particularly, the hardened single-layered chip cannot replicate the pneumatic valve—an essential actuator for automatically controlled microfluidics. Instead, 3D-printable non-pneumatic or manually actuated valve designs are reported, but their application is limited. Here, we present a low-cost accessible all-in-one portable microfluidic system, which uses an easy-to-print single-layered 3D-printed microfluidic chip along with a novel active control mechanism for fluids to enable more applications. This active control mechanism is based on air or gas interception and can, e.g., block, direct, and transport fluid. As a demonstration, we show the system can automatically control the fluid in microfluidic chips, which we designed and printed with a consumer-grade 3D-printer. The system is comparably compact and can automatically perform user-programmed experiments. All operations can be done directly on the system with no additional host device required. This work could support the spread of low budget accessible microfluidic systems as portable, usable on-the-go devices and increase the application field of 3D-printed microfluidic devices.

An integrated micro-millifluidic processing system

Integration of three-dimensional printing and microfluidics

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

An Integrated Microfluidic Device for Droplet Manipulation

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Multipath projection stereolithography (MPS) for 3D printing microfluidic devices

High Efficiency Integration of Three-Dimensional Functional Microdevices Inside a Microfluidic Chip by Using Femtosecond Laser Multifoci Parallel Microfabrication.

Portable all-in-one automated microfluidic system (PAMICON) with 3D-printed chip using novel fluid control mechanism

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

PDMS-based microfluidic device with multi-height structures fabricated by single-step photolithography using printed circuit board as masters.

Innovative 3D Microfluidic Tools for On-Chip Fluids and Particles Manipulation: From Design to Experimental Validation

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems

Design and Integration of an All-in-one Biomicrofluidic Chip.

Multiscale fabrication of scalable biomimetic 3-D, integrated micro-nanochannels network in PDMS for solute exchange

Development of PDMS-based Microfluidic Device for Cell-based Assays

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Fabrication of Microfluidic Systems in Poly(dimethylsiloxane)

Monolithically 3D-Printed Microfluidics with Embedded µTesla Pump

Fabrication of a microfluidic system with in situ-integrated microlens arrays using electrohydrodynamic jet printing

Research on Integrated 3D Printing of Microfluidic Chips