Report on the Forward Tracking Detector of the International Large Detector

Alberto Ruiz-Jimeno

DOI: https://doi.org/10.48550/arXiv.1201.1112

2012-01-05

Instrumentation and Detectors

Abstract:An overview of some progress and R&D activities of the Spanish network for future accelerators concerning the forward tracker detector of the International Large Detector is shown.

What problem does this paper attempt to address?

Status of the Forward Tracker Detector of ILD

Alberto Ruiz-Jimeno

DOI: https://doi.org/10.48550/arXiv.1403.5765

2014-03-23

Instrumentation and Detectors

Abstract:An overview of the present activities and long-term R&D plans of the Spanish network for future linear accelerators aiming to design and construct the Forward Tracker Detector (FTD) system of ILD, is shown
Forward silicon vertex/tracking detector design and R$\&$D for the future Electron-Ion Collider

Xuan Li,Melynda Brooks,Matt Durham,Yasser Corrales Morales,Astrid Morreale,Christopher Prokop,Eric Renner,Walter Sondheim

DOI: https://doi.org/10.22323/1.380.0084

2021-11-05

Abstract:The proposed high-luminosity high-energy Electron-Ion Collider (EIC) will provide a clean environment to precisely study several fundamental questions in the fields of high-energy and nuclear physics . A low material budget and high granularity silicon vertex/tracking detector is critical to carry out a series of hadron and jet measurements at the future EIC especially for the heavy flavor product reconstruction or tagging. The conceptual design of a proposed forward silicon tracking detector with the pseudorapidity coverage from 1.2 to 3.5 has been developed in integration with different magnet options and the other EIC detector sub-systems. The tracking performance of this detector enables precise heavy flavor hadron and jet measurements in the hadron beam going direction. The detector R$\&$D for the proposed silicon technology candidates: Low Gain Avalanche Diode (LGAD) and radiation hard depleted Monolithic Active Pixel Sensor (MALTA), which can provide good spatial and timing resolutions, is underway. Bench test results of the LGAD and MALTA prototype sensors will be discussed.

Instrumentation and Detectors,High Energy Physics - Experiment,Nuclear Experiment
Status of the Forward Physics Projects in ATLAS

Stefan Ask

DOI: https://doi.org/10.48550/arXiv.0706.0644

2007-06-05

High Energy Physics - Experiment

Abstract:The ATLAS experiment at the LHC is building several detector systems for forward physics studies and to determine the luminosity. The main forward systems consist of a Cerenkov detector called LUCID, a Zero Degree Calorimeter (ZDC) and Roman Pots which will house a scintillating fiber tracker system called ALFA. Here we report some of the forward physics activities that are foreseen in ATLAS together with the status of the related detector systems.
Latest developments on the highly granular Silicon-Tungsten Electromagnetic Calorimeter technological prototype for the International Large Detector

Adrián Irles

DOI: https://doi.org/10.48550/arXiv.1801.10407

2018-01-31

Instrumentation and Detectors

Abstract:High precision physics at future colliders requires unprecedented highly granular calorimeters for the application of the Particle Flow (PF) algorithm. The physical proof of concept was given in the previous campaign of beam tests of physic prototypes within the CALICE collaboration. We present here the latest beam and laboratory test results and R&D developments for the Silicon-Tungsten Electromagnetic Calorimeter technological prototype with fully embedded very front-end (VFE) electronics for the International Large Detector at the International Linear Collider project.
R&D on GEM Detectors for Forward Tracking at a Future Electron-Ion Collider

Aiwu Zhang,Vallary Bhopatkar,Marcus Hohlmann,Xinzhan Bai,Kondo Gnanvo,Nilanga K. Liyanage,Matt Posik,Bernd Surrow

DOI: https://doi.org/10.48550/arXiv.1511.07913

2015-11-24

Instrumentation and Detectors

Abstract:We report the status of R&D on large triple-GEM detectors for a forward tracker (FT) in an experiment at a future Electron Ion Collider (EIC) that will improve our understanding of QCD. We have designed a detector prototype specifically targeted for the EIC-FT, which has a trapezoidal shape with 30.1 degrees opening angle. We are investigating different detector assembly techniques and signal readout technologies, but have designed a common GEM foil to minimize NRE cost for foil production. The assembly techniques comprise either a purely mechanical method including foil stretching as pioneered by CMS but with certain modifications, or gluing foils to frames that are then assembled mechanically, or gluing foils to frames that are then glued together. The first two assembly techniques allow for re-opening chambers so that a GEM foil can be replaced if it is damaged. For readout technologies, we are pursuing a cost-effective one-dimensional readout with wide zigzag strips that maintains reasonable spatial resolution, as well two-dimensional readouts - one with stereo-angle (u-v) strips and another with r-phi strips. In addition, we aim at an overall low-mass detector design to facilitate good energy resolution for electrons scattered at low momenta. We present design for GEM foils and other detector parts, which we plan to entirely acquire from U.S. companies.
ATLAS Forward Detectors and Physics

N. Soni

DOI: https://doi.org/10.48550/arXiv.1006.5426

2010-06-29

Abstract:In this communication I describe the ATLAS forward physics program and the detectors, LUCID, ZDC and ALFA that have been designed to meet this experimental challenge. In addition to their primary role in the determination of ATLAS luminosity these detectors - in conjunction with the main ATLAS detector - will be used to study soft QCD and diffractive physics in the initial low luminosity phase of ATLAS running. Finally, I will briefly describe the ATLAS Forward Proton (AFP) project that currently represents the future of the ATLAS forward physics program.

High Energy Physics - Experiment
A New Longitudinal Diagnostics System for CERN's Antiproton Machines

M. E. Angoletta,D. Barrientos,B. Bielawski,M. Jaussi,M. Niccolini,A. Rey,M. Soderen,M. Suminski,J. Molendijk,V. R. Myklebust,S. Novel Gonzalez

DOI: https://doi.org/10.48550/arXiv.2212.06793

2022-12-15

Abstract:A new powerful longitudinal diagnostics is being developed for the two CERN's antiproton machines, the Antiproton Decelerator (AD) and the Extra Low ENergy ANtiproton (ELENA) ring. The longitudinal diagnostics receives data from the Low-Level Radiofrequency (LLRF) system via optical fiber. Real time processing of gigabit data-streams is enabled by its computational resources and real-time operating system. Measurement of intensity, bunch length and turn-by-turn bunch profiles are available for bunched beams. Intensity, momentum spread and average frequency will soon be measured for debunched beams. The system will provide essential input to setup and monitor RF and cooling systems. It will also be used by operators to monitor each machine's performances and the overall efficiency of the antiproton chain. This paper shows the data acquisition/processing mechanism and preliminary bunched beam results for AD. Next steps and plans for exporting the system to other CERN machines equipped with the same LLRF system are also mentioned.

Accelerator Physics
The Forward Proton Detector at D0

Gilvan Alves

DOI: https://doi.org/10.48550/arXiv.hep-ex/9804005

1998-04-10

High Energy Physics - Experiment

Abstract:We present the first results of detector R & D done for the proposed Forward Proton Detector at D0. From a menu of options we have chosen a scintillating fiber based detector with multi-anode photomultiplier readout.
Overview of ATLAS Forward Proton (AFP) detectors in Run-2 and outlook for Run-3 analyses

Andre Sopczak

2023-07-19

Abstract:We describe the status of the ATLAS Forward Proton (AFP) detectors in Run-2 and the outlook for Run-3 analyses. The performance is discussed. This includes the Tracking and Time-of-Flight detectors, the luminosity, the alignment, the trigger, and data quality monitoring. Additionally, key physics results from the first AFP analyses are showcased.

High Energy Physics - Experiment,Instrumentation and Detectors
Latest vertex and tracking detector developments for the future Electron-Ion Collider

Xuan Li

DOI: https://doi.org/10.48550/arXiv.2305.15593

2023-05-24

Instrumentation and Detectors

Abstract:The high-luminosity high-energy Electron-Ion Collider (EIC) to be built at Brookhaven National Laboratory (BNL) will provide a clean environment to study several fundamental questions in the high energy and nuclear physics fields. A high granularity and low material budget vertex and tracking detector is required to provide precise measurements of primary and displaced vertex and track reconstruction with good momentum and spatial resolutions. The reference design of the EIC project detector at the first Interaction Point (IP), which was selected from three submitted EIC detector proposals, enables a series of high precision heavy flavor measurements. Based on the EIC project detector reference design, the newly formed ePIC collaboration is developing the technical design for the EIC project detector towards its construction and operation. The reference design of the EIC vertex and tracking detector consists of the Monolithic Active Pixel Sensor (MAPS) based silicon vertex and tracking subsystem, the Micro-Pattern Gas Detector (MPGD) based gas tracking subsystem and the AC-Coupled Low Gain Avalanche Diode (AC-LGAD) based silicon outer tracker, and it has the track reconstruction capability in the pseudorapidity region of -3.5 to 3.5 with full azimuthal coverage. Further detector geometry optimization with a new magnet and technology down selection are underway by the ePIC collaboration. The latest ePIC vertex and tracking detector geometry and its performance evaluated in simulation will be presented. Details of the EIC vertex and tracking detector R$\&$D, which include the proposed detector technologies, prototype sensor characterization and detector mechanical design will be discussed as well.
Status of Dual-readout R&D for a linear collider in T1015 Collaboration

Corrado Gatto,Vito Di Benedetto,Eileen Hahn,Anna Mazzacane

DOI: https://doi.org/10.48550/arXiv.1603.00909

2016-03-03

Abstract:The hadronic energy resolution required for an hadronic operating at lepton collider is at the limits or even exceeds that obtained with traditional techniques. Furthermore, it is a well established fact that the presence of an electromagnetic section in front of an hadron calorimeter, as occurs in the layouts of the majority of detectors operating at a collider, would deteriorate the hadronic energy resolution of the device. The novel $ADRIANO$ technology (\textit{A Dual-readout Integrally Active Non-segmented Option}), currently under development at Fermilab, overcomes the above limitations by complementing an integrally active calorimeter with the dual-readout technique. Detailed Monte Carlo studies indicate that the energy resolution is in the $25\%/\sqrt{E}$ - $38\%/\sqrt{E}$ interval with a linear response of the detector up to an energy of 200 GeV. A baseline configuration is chosen with an estimated energy resolution of $\sigma(E)/E\approx30\%/\sqrt{E}$. Several prototypes have been built by \textit{T1015} Collaboration at Fermilab, to explore the effect of modifications of the layout from the baseline configuration. Preliminary results from several test beams at the \textit{Fermilab Test Beam Facility} (FTBF) of $\sim1\lambda_{I}$ prototypes are presented. Future prospects with ultra-heavy glass are, also, summarized.

Instrumentation and Detectors,High Energy Physics - Experiment
Recent Technological Developments on LGAD and iLGAD Detectors for Tracking and Timing Applications

G. Pellegrini,M. Baselga,M. Carulla,V. Fadeyev,P. Fernandez-Martinez,M. Fernandez-Garcia,D. Flores,Z. Galloway,C. Gallrapp,S. Hidalgo,Z. Liang,A. Merlos,M. Moll,D. Quirion,H. Sadrozinski,M. Stricker,I. Vila

DOI: https://doi.org/10.1016/j.nima.2016.05.066

2015-11-23

Abstract:This paper reports the last technological development on the Low Gain Avalanche Detector (LGAD) and introduces a new architecture of these detectors called inverse-LGAD (iLGAD). Both approaches are based on the standard Avalanche Photo Diodes (APD) concept, commonly used in optical and X-ray detection applications, including an internal multiplication of the charge generated by radiation. The multiplication is inherent to the basic n++-p+-p structure, where the doping profile of the p+ layer is optimized to achieve high field and high impact ionization at the junction. The LGAD structures are optimized for applications such as tracking or timing detectors for high energy physics experiments or medical applications where time resolution lower than 30 ps is required. Detailed TCAD device simulations together with the electrical and charge collection measurements are presented through this work.

Instrumentation and Detectors,High Energy Physics - Experiment
The International Large Detector (ILD) for a future electron-positron collider: Status and Plans

Ulrich Einhaus

2023-11-16

Abstract:This work presents the status and plans of the International Large Detector (ILD) concept, one of the most detailed and comprehensive detector concepts for a future Higgs factory. Most hardware groups have demonstrated ILD's performance targets and continue development with focus on improving further and making ILD fit for a circular collider. Their status, new developments and plans are elaborated. Two examples are given of new reconstruction methods that utilise hardware developments and contribute to advanced physics analyses prospects.

High Energy Physics - Experiment
Snowmass Instrumentation Frontier IF02 Topical Group Report: Photon Detectors

Carlos Escobar,Juan Estrada,Chris Rogan

DOI: https://doi.org/10.48550/arXiv.2208.13051

2022-08-28

Abstract:The Photon Detectors Topical Group has identified two areas where focused R&D over the next decade could have a large impact in High Energy Physics Experiments. These areas described here are characterized by the convergence of a compelling scientific need and recent technological advances. Key messages: IF02-1 The development of detectors with the capability of counting single photons from IR to UV has been a very active area in the last decade. We now need to pursue R\&D to implement these in HEP experiments by making larger arrays, improving their energy resolution, timing, dark counts rates and extending their wavelength coverage. IF02-2 New photon detector developments are being considered for planned future neutrino experiments going beyond the current technologies. Concept demonstrations have been done, and we now need to move from a conceptual phase to working detectors. The science for generation, detection and manipulation of light is extremely fast moving and driven mainly from outside our field. The HEP community would benefit from resources dedicated to the implementation of these advanced photonic technologies in particle physics experiments.

High Energy Physics - Experiment,Instrumentation and Detectors
SuperB Progress Reports -- Detector

SuperB Collaboration,E. Grauges et al.,Francesco Forti,Blair N. Ratcliff,David Aston

DOI: https://doi.org/10.48550/arXiv.1007.4241

2010-07-24

Abstract:This report describes the present status of the detector design for SuperB. It is one of four separate progress reports that, taken collectively, describe progress made on the SuperB Project since the publication of the SuperB Conceptual Design Report in 2007 and the Proceedings of SuperB Workshop VI in Valencia in 2008. The other three reports relate to Physics, Accelerator and Computing.

Instrumentation and Detectors,High Energy Physics - Experiment
uRWELL detector developments at Jefferson Lab for high luminosity experiments

Kondo Gnanvo,Florian Hauenstein,Sara Liyanaarachchi,Rafayel Paremuzyan,Stepan Stepanyan

2024-11-21

Abstract:One of the future plans at Jefferson Lab is running electron scattering experiments with large acceptance detectors at luminosities $> 10^{37}cm^{-2}s^{-1}$. These experiments allow the measurements of the Double Deeply Virtual Compton Scattering (DDVCS) reaction, an important physics process in the formalism of Generalized Parton Distributions, which has never been measured because of its small cross-section. The luminosity upgrade of CLAS12 or the SOLID detector makes Jefferson Lab a unique place to measure DDVCS. One of the important components of these high luminosity detectors is a tracking system that can withstand high rates of $\approx 1MHz/cm^{2}$. The recently developed Micro-Resistive Well (uRWELL) detector technology is a promising option for such a tracking detector by combining good position resolutions, low material budget with simple mechanical construction, and low production costs. In this proceeding, we will discuss recent developments and studies with uRWELL detectors at Jefferson Lab for future upgrades of the CLAS12 detector to study the DDVCS reaction.

Instrumentation and Detectors
Latest R\&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

Adrián Irles

DOI: https://doi.org/10.1088/1748-0221/13/02/C02038

2018-02-24

Abstract:High precision physics at future colliders as the International Linear Collider (ILC) require unprecedented high precision in the determination of the energy of final state particles. The needed precision will be achieved thanks to the Particle Flow algorithms (PF) which require highly granular and hermetic calorimeters <a class="link-external link-http" href="http://systems.The" rel="external noopener nofollow">this http URL</a> physical proof of concept of the PF was performed in the previous campaign of beam tests of physic prototypes within the CALICE collaboration. One of these prototypes was the physics prototype of the Silicon-Tungsten Electromagnetic Calorimeter (SiW-ECAL) for the ILC. In this document we present the latest news on R\&D of the next generation prototype, the technological prototype with fully embedded very front-end (VFE) electronics, of the SiW-ECAL. Special emphasis is given to the presentation and discussion of the first results from the beam test done at DESY in June 2017. The physics program for such beam test consisted in the calibration and commissioning of the current set of available SiW ECAL modules; the test of performance of individual slabs under 1T magnetic fields; and the study of electromagnetic showers events.

Instrumentation and Detectors
NEXT-100 Technical Design Report (TDR). Executive Summary

NEXT Collaboration,V. Álvarez,F. I. G. M. Borges,S. Cárcel,J. M. Carmona,J. Castel,J. M. Catalá,S. Cebrián,A. Cervera,D. Chan,C. A. N. Conde,T. Dafni,T. H. V. T. Dias,J. Díaz,M. Egorov,R. Esteve,P. Evtoukhovitch,L. M. P. Fernandes,P. Ferrario,A. L. Ferreira,E. Ferrer-Ribas,E. D. C. Freitas,V. M. Gehman,A. Gil,I. Giomataris,A. Goldschmidt,H. Gómez,J. J. Gómez-Cadenas,K. González,D. González-Díaz,R. M. Gutiérrez,J. Hauptman,J. A. Hernando Morata,D. C. Herrera,V. Herrero,F. J. Iguaz,I. G. Irastorza,V. Kalinnikov,D. Kiang,L. Labarga,I. Liubarsky,J. A. M. Lopes,D. Lorca,M. Losada,G. Luzón,A. Marí,J. Martín-Albo,A. Martínez,T. Miller,A. Moiseenko,F. Monrabal,C. M. B. Monteiro,J. M. Monzó,F. J. Mora,L. M. Moutinho,J. Muñoz Vidal,H. Natal da Luz,G. Navarro,M. Nebot,D. Nygren,C. A. B. Oliveira,R. Palma,J. Pérez,J. L. Pérez Aparicio,J. Renner,L. Ripoll,A. Rodríguez,J. Rodríguez,F. P. Santos,J. M. F. dos Santos,L. Segui,L. Serra,D. Shuman,C. Sofka,M. Sorel,J. F. Toledo,A. Tomás,J. Torrent,Z. Tsamalaidze,D. Vázquez,E. Velicheva,J. F. C. A. Veloso,J. A. Villar,R. C. Webb,T. Weber,J. White,N. Yahlali

DOI: https://doi.org/10.1088/1748-0221/7/06/T06001

2012-04-17

Abstract:In this Technical Design Report (TDR) we describe the NEXT-100 detector that will search for neutrinoless double beta decay (bbonu) in Xe-136 at the Laboratorio Subterraneo de Canfranc (LSC), in Spain. The document formalizes the design presented in our Conceptual Design Report (CDR): an electroluminescence time projection chamber, with separate readout planes for calorimetry and tracking, located, respectively, behind cathode and anode. The detector is designed to hold a maximum of about 150 kg of xenon at 15 bar, or 100 kg at 10 bar. This option builds in the capability to increase the total isotope mass by 50% while keeping the operating pressure at a manageable level. The readout plane performing the energy measurement is composed of Hamamatsu R11410-10 photomultipliers, specially designed for operation in low-background, xenon-based detectors. Each individual PMT will be isolated from the gas by an individual, pressure resistant enclosure and will be coupled to the sensitive volume through a sapphire window. The tracking plane consists in an array of Hamamatsu S10362-11-050P MPPCs used as tracking pixels. They will be arranged in square boards holding 64 sensors (8 times8) with a 1-cm pitch. The inner walls of the TPC, the sapphire windows and the boards holding the MPPCs will be coated with tetraphenyl butadiene (TPB), a wavelength shifter, to improve the light collection.

Instrumentation and Detectors,High Energy Physics - Experiment
Impact of Advances in Detector Techniques on Higgs Measurements at Future Higgs Factories

Ulrich Einhaus,Bohdan Dudar,Jenny List,Yasser Radkhorrami,Julie Torndal

DOI: https://doi.org/10.48550/arXiv.2212.07264

2022-12-14

Abstract:While the particle physics community is eagerly waiting for a positive sign for the construction of the next energy frontier collider, developments continue to advance the detector capabilities. New methods and algorithms are being implemented in order to exploit the precious collisions at a Future Higgs Factory as well as possible, informing at the same time, which detector aspects are of particular importance or in fact currently limiting. In this work, three new event analysis methods are briefly introduced and put into context of hardware development for a detector at a Future Higgs Factory. While they use data from a large Geant4-based detailed MC production of the International Large Detector at the proposed International Linear Collider at an e$^+$e$^-$ center-of-mass energy of 250 GeV, the conclusions are applicable to any Future Higgs Factory.

High Energy Physics - Experiment,Instrumentation and Detectors
A Fast Readout Electronic System for Accurate Spatial Detection in Ion Beam Tracking for the Next Generation of Particle Accelerators

J. Caceres,M. A. G. Alvarez,J. M. Rosa,A. Garzon-Camacho,B. Martinez

DOI: https://doi.org/10.1109/TIM.2014.2344351

IF: 5.6

2015-02-01

IEEE Transactions on Instrumentation and Measurement

Abstract:This paper presents the design, implementation, and measurements of a complete electronic frontend intended for high-resolution spatial detection of ion beams at counting rates higher than 106 particles per second (p/s). The readout system is made up of three main multichannel building blocks, namely, a transimpedance preamplifier, a signal-conditioning line receiver, and a charge-to-digital converter, as well as some off-the-shelf components. The preamplifier and the line receiver have been specifically designed and optimized to minimize the overlapping probability of ion beams tracking, at high counting rates, in low-pressure gaseous secondary electron detectors. Experimental results are shown, considering α particles sources and particles beams, featuring an adaptive shaping time frame of 170-230 ns with a peak signal-to-noise ratio of up to 25 dB. These performance metrics are competitive with the state of the art, demonstrating the suitability of the reported data acquisition and instrumentation system for precise and fast particle tracking detection.

Engineering,Computer Science,Physics

Report on the Forward Tracking Detector of the International Large Detector

Status of the Forward Tracker Detector of ILD

Forward silicon vertex/tracking detector design and R$\&$D for the future Electron-Ion Collider

Status of the Forward Physics Projects in ATLAS

Latest developments on the highly granular Silicon-Tungsten Electromagnetic Calorimeter technological prototype for the International Large Detector

R&D on GEM Detectors for Forward Tracking at a Future Electron-Ion Collider

ATLAS Forward Detectors and Physics

A New Longitudinal Diagnostics System for CERN's Antiproton Machines

The Forward Proton Detector at D0

Overview of ATLAS Forward Proton (AFP) detectors in Run-2 and outlook for Run-3 analyses

Latest vertex and tracking detector developments for the future Electron-Ion Collider

Status of Dual-readout R&D for a linear collider in T1015 Collaboration

Recent Technological Developments on LGAD and iLGAD Detectors for Tracking and Timing Applications

The International Large Detector (ILD) for a future electron-positron collider: Status and Plans

Snowmass Instrumentation Frontier IF02 Topical Group Report: Photon Detectors

SuperB Progress Reports -- Detector

uRWELL detector developments at Jefferson Lab for high luminosity experiments

Latest R\&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

NEXT-100 Technical Design Report (TDR). Executive Summary

Impact of Advances in Detector Techniques on Higgs Measurements at Future Higgs Factories

A Fast Readout Electronic System for Accurate Spatial Detection in Ion Beam Tracking for the Next Generation of Particle Accelerators