Abstract:Solar concentrators employed in conjunction with highly efficient micro- and meso-channel reactors offer the potential for cost-effective upgrading of the energy content of natural gas, providing a near-term path towards a future solar-fuel economy with reduced carbon dioxide emissions. To fully exploit the heat and mass transfer advantages offered by micro- and meso-channel reactors, highly active and stable natural gas steam reforming catalysts are required. In this paper, we report the catalytic performance of MgAl2O4-supported Rh (5 wt.%), Ir (5 wt.%), and Ni (15 wt.%) catalysts used for steam reforming of natural gas. Both Rh- and Ir-based catalysts are known to be more active and durable than conventional Ni-based formulations, and recently Ir has been reported to be more active than Rh for methane steam reforming on a turnover basis. Thus, the effectiveness of all three metals to perform natural gas steam reforming was evaluated in this study. Here, the Rh- and Ir-supported catalysts both exhibited higher activity than Ni for steam methane reforming. However, using simulated natural gas feedstock (94.5% methane, 4.0% ethane, 1.0% propane, and 0.5% butane), the Ir catalyst was the least active (on a turnover basis) for steam reforming of higher hydrocarbons (C2+) contained in the feedstock when operated at <750 °C. To further investigate the role of higher hydrocarbons, we used an ethane feed and found that hydrogenolysis precedes the steam reforming reaction and that C–C bond scission over Ir is kinetically slow compared to Rh. Catalyst durability studies revealed the Rh catalyst to be stable under steam methane reforming conditions, as evidenced by two 100-hour duration experiments performed at 850 and 900 °C (steam to carbon [S/C] molar feed ratio = 2.0 mol). However, with the natural gas simulant feed, the Rh catalyst exhibited catalyst deactivation, which we attribute to coking deposits derived from higher hydrocarbons contained in the feedstock. Increasing the S/C molar feed ratio from 1.5 to 2.0 reduced the deactivation rate and stable catalytic performance was demonstrated for 120 h when operated at 850 °C. However, catalytic deactivation was observed when operating at 900 °C. While improvements in steam reforming performance can be achieved through choice of catalyst composition, this study also highlights the importance of considering the effect of higher hydrocarbons contained in natural gas, operating conditions (e.g., temperature, S/C feed ratio), and their effect on catalyst stability. The results of this study conclude that a Rh-supported catalyst was developed that enables very high activities and excellent catalytic stability for both the steam reforming of methane and other higher hydrocarbons contained in natural gas, and under conditions of operation that are amendable to solar thermochemical operations.

Steam methane reforming over structured reactors under concentrated solar irradiation

A solar methane reforming reactor design with enhanced efficiency

Combined Ceria Reduction and Methane Reforming in a Solar-Driven Particle-Transport Reactor

Numerical Analysis of Hydrogen Production Via Methane Steam Reforming in Porous Media Solar Thermochemical Reactor Using Concentrated Solar Irradiation As Heat Source

Unsteady state thermochemical performance analyses of solar driven steam methane reforming in porous medium reactor

Thermal and chemical analysis of methane dry reforming in a volumetric reactor under highly concentrated solar radiation

Promoted solar-driven dry reforming of methane with Pt/mesoporous-TiO2 photo-thermal synergistic catalyst: Performance and mechanism study

The Nature of Active Sites for Plasmon-Mediated Photothermal Catalysis and Heat-Coupled Photocatalysis in Dry Reforming of Methane

Methane and Ethane Steam Reforming over MgAl2O4-Supported Rh and Ir Catalysts: Catalytic Implications for Natural Gas Reforming Application

Recent Advances in Nanostructured Catalysts for Photo-Assisted Dry Reforming of Methane

Thermal-chemical Reaction Characteristics of Ni/Al2O3 Catalytic Porous Material Filled Solar Reactor for Dry Reforming of Methane Process

Study on solar-driven methanol steam reforming process in parabolic trough solar receiver-reactors by developing an optical-thermal-chemical model of realistic porosity distributions

Numerical Simulation of Methanol Steam Reforming in a Solar-powered Micro-channel Reactor

A Comprehensive Study on Parabolic Trough Solar Receiver-Reactors of Methanol-Steam Reforming Reaction for Hydrogen Production

Comprehensive Study on Parabolic Trough Solar Receiver-Reactors Via a Novel Efficient Optical-Thermal-chemical Model of Catalyst Packed Bed Characteristics

Efficient Photothermochemical Dry Reforming of Methane over Ni Supported on ZrO2 with CeO2 Incorporation

Steam reforming of methane: Current states of catalyst design and process upgrading

Highly Efficient Solar‐driven Dry Reforming of Methane on a Rh/LaNiO3 Catalyst through a Light‐induced Metal‐to‐metal Charge Transfer Process

Enhanced photothermal catalytic performance of dry reforming of methane over Ni/mesoporous TiO2 composite catalyst

Modulating oxidation state of Ni/CeO<sub>2</sub> catalyst for steam methane reforming: a theoretical prediction with experimental verification

A Monolith CuNiFe/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether and Applied in a Microreactor