Metaldehyde residues on and in citrus fruits after a soil broadcast of a granular formulation and after a spray application to citrus trees.

Y. Iwata,G. Carman,T. Dinoff,F. Gunther

DOI: https://doi.org/10.1021/JF00111A050

IF: 6.1

1982-05-01

Journal of Agricultural and Food Chemistry

Abstract:

What problem does this paper attempt to address?

Online estimation of the hand-eye transformation from surgical scenes

Krittin Pachtrachai,Francisco Vasconcelos,Danail Stoyanov

2023-06-04

Abstract:Hand-eye calibration algorithms are mature and provide accurate transformation estimations for an effective camera-robot link but rely on a sufficiently wide range of calibration data to avoid errors and degenerate configurations. To solve the hand-eye problem in robotic-assisted minimally invasive surgery and also simplify the calibration procedure by using neural network method cooporating with the new objective function. We present a neural network-based solution that estimates the transformation from a sequence of images and kinematic data which significantly simplifies the calibration procedure. The network utilises the long short-term memory architecture to extract temporal information from the data and solve the hand-eye problem. The objective function is derived from the linear combination of remote centre of motion constraint, the re-projection error and its derivative to induce a small change in the hand-eye transformation. The method is validated with the data from da Vinci Si and the result shows that the estimated hand-eye matrix is able to re-project the end-effector from the robot coordinate to the camera coordinate within 10 to 20 pixels of accuracy in both testing dataset. The calibration performance is also superior to the previous neural network-based hand-eye method. The proposed algorithm shows that the calibration procedure can be simplified by using deep learning techniques and the performance is improved by the assumption of non-static hand-eye transformations.

Robotics,Machine Learning
AN AUTONOMOUS HAND-EYE CALIBRATION METHOD

Yuli Cheng,Yifeng Zhang,Peng Wang,Rong Xiong

DOI: https://doi.org/10.1142/9789814725248_0067

2016-01-01

Abstract:Hand-eye calibration to determine the relative pose between the robot and camera is a crucial problem for many tasks where the robot has to physically interact with the environment. This paper introduces an autonomous method for the calibration of eye-to-hand system, which is aimed at making the hand-eye calibration easy to operate in the industrial application. In this method, motion planning based on imaging model of camera is executed to make sure the calibration object mounted on robot end-effector in the range of camera vision. The poses of calibration object and robot end-effector are gathered in real time to calibrate and update the hand-eye relation until the result is convergent. Experiments have been conducted and experimental results show the effectiveness and accuracy of the proposed method.
Vision-based hand-eye calibration for robot-assisted minimally invasive surgery

Yanwen Sun,Bo Pan,Yongchen Guo,Yili Fu,Guojun Niu

DOI: https://doi.org/10.1007/s11548-020-02245-5

Abstract:Purpose: The knowledge of laparoscope vision can greatly improve the surgical operation room (OR) efficiency. For the vision-based computer-assisted surgery, the hand-eye calibration establishes the coordinate relationship between laparoscope and robot slave arm. While significant advances have been made for hand-eye calibration in recent years, efficient algorithm for minimally invasive surgical robot is still a major challenge. Removing the external calibration object in abdominal environment to estimate the hand-eye transformation is still a critical problem. Methods: We propose a novel hand-eye calibration algorithm to tackle the problem which relies purely on surgical instrument already in the operating scenario for robot-assisted minimally invasive surgery (RMIS). Our model is formed by the geometry information of the surgical instrument and the remote center-of-motion (RCM) constraint. We also enhance the algorithm with stereo laparoscope model. Results: Promising validation of synthetic simulation and experimental surgical robot system have been conducted to evaluate the proposed method. We report results that the proposed method can exhibit the hand-eye calibration without calibration object. Conclusion: Vision-based hand-eye calibration is developed. We demonstrate the feasibility to perform hand-eye calibration by taking advantage of the components of surgical robot system, leading to the efficiency of surgical OR.
Development of a novel hand-eye calibration for intuitive control of minimally invasive surgical robot

Yanwen Sun,Bo Pan,Yili Fu

DOI: https://doi.org/10.1007/s11465-022-0698-y

IF: 4.063

2022-11-09

Frontiers of Mechanical Engineering

Abstract:Robotic-assisted surgical system has introduced a powerful platform through dexterous instrument and hand-eye coordination intuitive control. The knowledge of laparoscopic vision is a crucial piece of information for robot-assisted minimally invasive surgery focusing on improved surgical outcomes. Obtaining the transformation with respect to the laparoscope and robot slave arm frames using hand-eye calibration is essential, which is a key component for developing intuitive control algorithm. We proposed a novel two-step modified dual quaternion for hand-eye calibration in this study. The dual quaternion was exploited to solve the hand-eye calibration simultaneously and powered by an iteratively separate solution. The obtained hand-eye calibration result was applied to the intuitive control by using the hand-eye coordination criterion. Promising simulations and experimental studies were conducted to evaluate the proposed method on our surgical robot system. We extensively compared the proposed method with state-of-the-art methods. Results demonstrate this method can improve the calibration accuracy. The effectiveness of the intuitive control algorithm was quantitatively evaluated, and an improved hand-eye calibration method was developed. The relationship between laparoscope and robot kinematics can be established for intuitive control.

engineering, mechanical
Towards Robotic Eye Surgery: Marker-free, Online Hand-eye Calibration using Optical Coherence Tomography Images

Mingchuan Zhou,Mahdi Hamad,Jakob Weiss,Abouzar Eslami,Kai Huang,Mathias Maier,Chris P. Lohmann,Nassir Navab,Alois Knoll,M. Ali Nasseri

DOI: https://doi.org/10.1109/LRA.2018.2858744

2018-08-17

Abstract:Ophthalmic microsurgery is known to be a challenging operation, which requires very precise and dexterous manipulation. Image guided robot-assisted surgery (RAS) is a promising solution that brings significant improvements in outcomes and reduces the physical limitations of human surgeons. However, this technology must be further developed before it can be routinely used in clinics. One of the problems is the lack of proper calibration between the robotic manipulator and appropriate imaging device. In this work, we developed a flexible framework for hand-eye calibration of an ophthalmic robot with a microscope-integrated Optical Coherence Tomography (MIOCT) without any markers. The proposed method consists of three main steps: a) we estimate the OCT calibration parameters; b) with micro-scale displacements controlled by the robot, we detect and segment the needle tip in 3D-OCT volume; c) we find the transformation between the coordinate system of the OCT camera and the coordinate system of the robot. We verified the capability of our framework in ex-vivo pig eye experiments and compared the results with a reference method (marker-based). In all experiments, our method showed a small difference from the marker based method, with a mean calibration error of 9.2 $\mu$m and 7.0 $\mu$m, respectively. Additionally, the noise test shows the robustness of the proposed method.

Robotics,Computer Vision and Pattern Recognition
Cognitive rehearsal in the treatment of obesity: a comparison against cue avoidance and social pressure.

G. Bennett

DOI: https://doi.org/10.1016/0306-4603(86)90051-1

Abstract:
A Novel Point Set Registration-Based Hand–Eye Calibration Method for Robot-Assisted Surgery

Wenyuan Sun,Jihao Liu,Yuyun Zhao,Guoyan Zheng

DOI: https://doi.org/10.3390/s22218446

IF: 3.9

2022-11-04

Sensors

Abstract:Pedicle screw insertion with robot assistance dramatically improves surgical accuracy and safety when compared with manual implantation. In developing such a system, hand–eye calibration is an essential component that aims to determine the transformation between a position tracking and robot-arm systems. In this paper, we propose an effective hand–eye calibration method, namely registration-based hand–eye calibration (RHC), which estimates the calibration transformation via point set registration without the need to solve the AX=XB equation. Our hand–eye calibration method consists of tool-tip pivot calibrations in two-coordinate systems, in addition to paired-point matching, where the point pairs are generated via the steady movement of the robot arm in space. After calibration, our system allows for robot-assisted, image-guided pedicle screw insertion. Comprehensive experiments are conducted to verify the efficacy of the proposed hand–eye calibration method. A mean distance deviation of 0.70 mm and a mean angular deviation of 0.68° are achieved by our system when the proposed hand–eye calibration method is used. Further experiments on drilling trajectories are conducted on plastic vertebrae as well as pig vertebrae. A mean distance deviation of 1.01 mm and a mean angular deviation of 1.11° are observed when the drilled trajectories are compared with the planned trajectories on the pig vertebrae.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Simultaneous Calibration of the Hand-Eye, Flange-Tool and Robot-Robot Relationship in Dual-Robot Collaboration Systems

Yanding Qin,Pengxiu Geng,Bowen Lv,Yiyang Meng,Zhichao Song,Jianda Han

DOI: https://doi.org/10.3390/s22051861

IF: 3.9

2022-02-26

Sensors

Abstract:A multi-robot collaboration system can complete more complex tasks than a single robot system. Ensuring the calibration accuracy between robots in the system is a prerequisite for the effective inter-robot cooperation. This paper presents a dual-robot system for orthopedic surgeries, where the relationships between hand-eye, flange-tool, and robot-robot need to be calibrated. This calibration problem can be summarized to the solution of the matrix equation of AXB=YCZ. A combined solution is proposed to solve the unknown parameters in the equation of AXB=YCZ, which consists of the dual quaternion closed-form method and the iterative method based on Levenberg–Marquardt (LM) algorithm. The closed-form method is used to quickly obtain the initial value for the iterative method so as to increase the convergence speed and calibration accuracy of the iterative method. Simulation and experimental analyses are carried out to verify the accuracy and effectiveness of the proposed method.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
[A Plane-Based Hand-Eye Calibration Method for Surgical Robots].

Bowei Zeng,Fanle Meng,Hui Ding,Wenbo Liu,Di Wu,Guangzhi Wang

DOI: https://doi.org/10.7507/1001-5515.201605050

2017-01-01

Abstract:In order to calibrate the hand-eye transformation of the surgical robot and laser range finder (LRF), a calibration algorithm based on a planar template was designed. A mathematical model of the planar template had been given and the approach to address the equations had been derived. Aiming at the problems of the measurement error in a practical system, we proposed a new algorithm for selecting coplanar data. This algorithm can effectively eliminate considerable measurement error data to improve the calibration accuracy. Furthermore, three orthogonal planes were used to improve the calibration accuracy, in which a nonlinear optimization for hand-eye calibration was used. With the purpose of verifying the calibration precision, we used the LRF to measure some fixed points in different directions and a cuboid's surfaces. Experimental results indicated that the precision of a single planar template method was (1.37±0.24) mm, and that of the three orthogonal planes method was (0.37±0.05) mm. Moreover, the mean FRE of three-dimensional (3D) points was 0.24 mm and mean TRE was 0.26 mm. The maximum angle measurement error was 0.4 degree. Experimental results show that the method presented in this paper is effective with high accuracy and can meet the requirements of surgical robot precise location.
A Hand-Eye Calibration Method for Computer Assisted Endoscopy.

Wei He,Kumsok Kang,Huamin Yang,Yu Miao,Weili Shi,Fei He,Fei Yan,Zhengang Jiang,Huimao Zhang

DOI: https://doi.org/10.1109/icnc.2015.7378102

2015-01-01

Abstract:Endoscopy has been more and more widely used in clinical application. The surgical navigation system is an important way to improve the safety of endoscopy. To get the position relationship between camera and tracking marker is a critical work for improving the precision of the navigation system. This problem can be solved by the hand-eye calibration approach using dual quaternion. However, because of the output error of tracking system and the limited motion of the endoscope, this algorithm becomes unstable and the system accuracy is low. Therefore, this paper proposes a method to avoid these problems by advancing the selection rule of sample motions. The experimental results show that the stability and the accuracy of algorithm have been improved by selecting sample motion data automatically.
Precise hand-eye calibration method based on spatial distance and epipolar constraints

Zhenyu Liu,Xia Liu,Guifang Duan,Jianrong Tan

DOI: https://doi.org/10.1016/j.robot.2021.103868

IF: 3.7

2021-01-01

Robotics and Autonomous Systems

Abstract:In this paper, a new hand-eye calibration method based on spatial distance and epipolar constraints is proposed to obtain the transformation X between the end effector (hand) of the robotic arm and the camera (eye) fixed on the end effector. Most of the current effective hand-eye calibration methods utilize the classical identity, AX = XB, to obtain the analytical solution of X, and then apply various constraints to iteratively optimize the initial X, but these constraints are often at the 2D level. However, the result of hand-eye calibration needs to ensure the accuracy of the vision-guided robot arm system operating in 3D space, which leads to inconsistency between optimization goals and the actual requirements. Therefore, the proposed method introduces 3D constraints into the iterative optimization of X and takes 3D error as an evaluation indicator of the calibration quality. There are two main steps in the proposed method. Firstly, the initial value of hand-eye transformation matrix is calculated by utilizing Kronecker product, which avoids the error propagation from rotation parameters to translation parameters. Then, the inherent epipolar constraints and the spatial distance constraints between feature points are combined to optimize hand-eye calibration parameters iteratively. To evaluate the precision and robustness of the proposed method, both simulation experiment and real experiment are carried out. The experimental results show that compared with conventional methods, the proposed method has higher accuracy and stronger robustness. (C) 2021 Published by Elsevier B.V.
Epidemiological and clinical features associated with colonisation/infection by Acinetobacter baumannii with phenotypic heterogeneous resistance to carbapenems.

F. Fernández-Cuenca,Ma Carmen Gómez-Sánchez,J. Rodríguez-Baño,L. Martínez-Martínez,J. Vila,G. Bou,Á. Pascual

DOI: https://doi.org/10.1016/j.ijantimicag.2012.05.005

IF: 15.441

2012-09-01

International Journal of Antimicrobial Agents

Abstract:
An Improved Robust Hand-Eye Calibration for Endoscopy Navigation System

Wei He,Kumsok Kang,Yanfang Li,Weili Shi,Yu Miao,Fei He,Fei Yan,Huamin Yang,Huimao Zhang,Kensaku Mori,Zhengang Jiang

DOI: https://doi.org/10.1117/12.2216910

2016-01-01

Abstract:Endoscopy is widely used in clinical application, and surgical navigation system is an extremely important way to enhance the safety of endoscopy. The key to improve the accuracy of the navigation system is to solve the positional relationship between camera and tracking marker precisely. The problem can be solved by the hand eye calibration method based on dual quaternions. However, because of the tracking error and the limited motion of the endoscope, the sample motions may contain some incomplete motion samples. Those motions will cause the algorithm unstable and inaccurate. An advanced selection rule for sample motions is proposed in this paper to improve the stability and accuracy of the methods based on dual quaternion. By setting the motion filter to filter out the incomplete motion samples, finally, high precision and robust result is achieved. The experimental results show that the accuracy and stability of camera registration have been effectively improved by selecting sample motion data automatically.
Robot Hand-Eye Calibration using Structure-from-Motion

Nicolas Andreff,Radu Horaud,Bernard Espiau

DOI: https://doi.org/10.1177/02783640122067372

2023-11-21

Abstract:In this paper we propose a new flexible method for hand-eye calibration. The vast majority of existing hand-eye calibration techniques requires a calibration rig which is used in conjunction with camera pose estimation methods. Instead, we combine structure-from-motion with known robot motions and we show that the solution can be obtained in linear form. The latter solves for both the hand-eye parameters and for the unknown scale factor inherent with structure-from-motion methods. The algebraic analysis that is made possible with such a linear formulation allows to investigate not only the well known case of general screw motions but also such singular motions as pure translations, pure rotations, and planar motions. In essence, the robot-mounted camera looks to an unknown rigid layout, tracks points over an image sequence and estimates the camera-to-robot relationship. Such a self calibration process is relevant for unmanned vehicles, robots working in remote places, and so forth. We conduct a large number of experiments which validate the quality of the method by comparing it with existing ones.

Robotics,Computer Vision and Pattern Recognition
Hand-Eye Camera Calibration with an Optical Tracking System

Marco Lai,Caifeng Shan,Peter H. N. de With

DOI: https://doi.org/10.1145/3243394.3243700

2018-01-01

Abstract:This paper presents a method for hand-eye camera calibration via an optical tracking system (OTS) faciltating robotic applications. The camera pose cannot be directly tracked via the OTS. Because of this, a transformation matrix between a marker-plate pose, tracked via the OTS, and the camera pose needs to be estimated. To this end, we evaluate two different approaches for hand-eye calibration. In the first approach, the camera is in a fixed position and a 2D calibration plate is displaced. In the second approach, the camera is also fixed, but now a 3D calibration object is moved. The first step of our method consists of collecting N views of the marker-plate pose and the calibration plates, acquired via OTS. This is achieved by keeping the camera fixed and moving the calibration plate, while taking a picture of the calibration plate using the camera. A dataset is constructed that contains marker-plate poses and the relative camera poses. Afterwards, the transformation matrix is then computed, following a least-squares minimization. Accuracy in hand-eye calibration is computed in terms of re-projection error, calculated based on camera homography transformations. For both approaches, we measure the changes in accuracy as a function of the number of poses used for each calibration, while we define the minimum number of poses required to obtain a good camera calibration. Results of the experiments show similar performances for the two evaluated methods, achieving a median value of the re-projection error at N = 25 poses of 0.76 mm for the 2D calibration plate and 0.70 mm for the 3D calibration object. Also, we have found that minimally 15 poses are required to achieve a good camera calibration.
Autonomous Robot Calibration for Hand-Eye Coordination

David J. Bennett,Davi Geiger,John M. Hollerbach

DOI: https://doi.org/10.1177/027836499101000510

1991-10-01

The International Journal of Robotics Research

Abstract:Autonomous robot calibration is defined as the process of determining a robot's model by using only its internal sen sors. It is shown that autonomous calibration of a manip ulator and stereo camera system is possible. The pro posed autonomous calibration algorithm may obtain the manipulator kinematic parameters, external kinematic camera parameters, and internal camera parameters. To do this, only joint angle readings and camera image plane data are used. A condition for the identifiability of the manipulator/camera parameters is derived. The method is a generalization of a recently developed scheme for self- calibrating a manipulator by forming it into a mobile closed-loop kinematic chain.
Gaze gesture based human robot interaction for laparoscopic surgery

Kenko Fujii,Gauthier Gras,Antonino Salerno,Guang-Zhong Yang

DOI: https://doi.org/10.1016/j.media.2017.11.011

IF: 10.9

2018-02-01

Medical Image Analysis

Abstract:While minimally invasive surgery offers great benefits in terms of reduced patient trauma, bleeding, as well as faster recovery time, it still presents surgeons with major ergonomic challenges. Laparoscopic surgery requires the surgeon to bimanually control surgical instruments during the operation. A dedicated assistant is thus required to manoeuvre the camera, which is often difficult to synchronise with the surgeon's movements. This article introduces a robotic system in which a rigid endoscope held by a robotic arm is controlled via the surgeon's eye movement, thus forgoing the need for a camera assistant. Gaze gestures detected via a series of eye movements are used to convey the surgeon's intention to initiate gaze contingent camera control. Hidden Markov Models (HMMs) are used for real-time gaze gesture recognition, allowing the robotic camera to pan, tilt, and zoom, whilst immune to aberrant or unintentional eye movements. A novel online calibration method for the gaze tracker is proposed, which overcomes calibration drift and simplifies its clinical application. This robotic system has been validated by comprehensive user trials and a detailed analysis performed on usability metrics to assess the performance of the system. The results demonstrate that the surgeons can perform their tasks quicker and more efficiently when compared to the use of a camera assistant or foot switches.

engineering, biomedical,computer science, interdisciplinary applications, artificial intelligence,radiology, nuclear medicine & medical imaging
Multi-Camera Hand-Eye Calibration for Human-Robot Collaboration in Industrial Robotic Workcells

Davide Allegro,Matteo Terreran,Stefano Ghidoni

2024-06-17

Abstract:In industrial scenarios, effective human-robot collaboration relies on multi-camera systems to robustly monitor human operators despite the occlusions that typically show up in a robotic workcell. In this scenario, precise localization of the person in the robot coordinate system is essential, making the hand-eye calibration of the camera network critical. This process presents significant challenges when high calibration accuracy should be achieved in short time to minimize production downtime, and when dealing with extensive camera networks used for monitoring wide areas, such as industrial robotic workcells. Our paper introduces an innovative and robust multi-camera hand-eye calibration method, designed to optimize each camera's pose relative to both the robot's base and to each other camera. This optimization integrates two types of key constraints: i) a single board-to-end-effector transformation, and ii) the relative camera-to-camera transformations. We demonstrate the superior performance of our method through comprehensive experiments employing the METRIC dataset and real-world data collected on industrial scenarios, showing notable advancements over state-of-the-art techniques even using less than 10 images. Additionally, we release an open-source version of our multi-camera hand-eye calibration algorithm at <a class="link-external link-https" href="https://github.com/davidea97/Multi-Camera-Hand-Eye-Calibration.git" rel="external noopener nofollow">this https URL</a>.

Robotics,Computer Vision and Pattern Recognition
Endoscope FOV Autonomous Tracking Method for Robot-Assisted Surgery Considering Pose Control, Hand–Eye Coordination, and Image Definition

Jianqing Peng,Chi Zhang,Liang Kang,Guodong Feng

DOI: https://doi.org/10.1109/tim.2022.3204086

IF: 5.6

2022-10-01

IEEE Transactions on Instrumentation and Measurement

Abstract:In laparoscopic surgeries, intelligent-assisted endoscope-holding robots (AEHRs) with traditional servo control have limited performance due to the lack of endoscopic attitude control, hand–eye coordination, and image definition. This article proposes an endoscope field-of-view (FOV) autonomous tracking method for robot-assisted surgery (RAS) considering pose (i.e., position and attitude) control, hand–eye coordination, and image definition, and it can realize that the AEHR system can safely, stably, and quickly track the movement of surgical instruments. First, the general framework of the intelligent tracking system with robot-assisted endoscope holding is constructed according to the clinical needs and shortcomings of traditional research. Second, the kinematic model and remote center of motion (RCM) constraint equations of AEHRs are established. Then, surgical instrument tips are segmented and localized using the deep learning method (DLM), and further, a surgical FOV intelligent adjustment control model with multiple indexes is developed. Finally, an experimental system based on the hybrid of AEHRs and speech interaction is built. The simulation and experimental results demonstrate that the proposed method can achieve fast, accurate, and effective instrument tips tracking (ITT), reduce hand–eye incoordination, and improve the safety and stability of FOV intelligent adjustment.

engineering, electrical & electronic,instruments & instrumentation
Accuracy evaluation of hand-eye calibration techniques for vision-guided robots

Ikenna Enebuse,Babul K S M Kader Ibrahim,Mathias Foo,Ranveer S Matharu,Hafiz Ahmed

DOI: https://doi.org/10.1371/journal.pone.0273261

IF: 3.7

2022-10-19

PLoS ONE

Abstract:Hand-eye calibration is an important step in controlling a vision-guided robot in applications like part assembly, bin picking and inspection operations etc. Many methods for estimating hand-eye transformations have been proposed in literature with varying degrees of complexity and accuracy. However, the success of a vision-guided application is highly impacted by the accuracy the hand-eye calibration of the vision system with the robot. The level of this accuracy depends on several factors such as rotation and translation noise, rotation and translation motion range that must be considered during calibration. Previous studies and benchmarking of the proposed algorithms have largely been focused on the combined effect of rotation and translation noise. This study provides insight on the impact of rotation and translation noise acting in isolation on the hand-eye calibration accuracy. This deviates from the most common method of assessing hand-eye calibration accuracy based on pose noise (combined rotation and translation noise). We also evaluated the impact of the robot motion range used during the hand-eye calibration operation which is rarely considered. We provide quantitative evaluation of our study using six commonly used algorithms from an implementation perspective. We comparatively analyse the performance of these algorithms through simulation case studies and experimental validation using the Universal Robot's UR5e physical robots. Our results show that these different algorithms perform differently when the noise conditions vary rather than following a general trend. For example, the simultaneous methods are more resistant to rotation noise, whereas the separate methods are better at dealing with translation noise. Additionally, while increasing the robot rotation motion span during calibration enhances the accuracy of the separate methods, it has a negative effect on the simultaneous methods. Conversely, increasing the translation motion range improves the accuracy of simultaneous methods but degrades the accuracy of the separate methods. These findings suggest that those conditions should be considered when benchmarking algorithms or performing a calibration process for enhanced accuracy.

Metaldehyde residues on and in citrus fruits after a soil broadcast of a granular formulation and after a spray application to citrus trees.

Online estimation of the hand-eye transformation from surgical scenes

AN AUTONOMOUS HAND-EYE CALIBRATION METHOD

Vision-based hand-eye calibration for robot-assisted minimally invasive surgery

Development of a novel hand-eye calibration for intuitive control of minimally invasive surgical robot

Towards Robotic Eye Surgery: Marker-free, Online Hand-eye Calibration using Optical Coherence Tomography Images

Cognitive rehearsal in the treatment of obesity: a comparison against cue avoidance and social pressure.

A Novel Point Set Registration-Based Hand–Eye Calibration Method for Robot-Assisted Surgery

Simultaneous Calibration of the Hand-Eye, Flange-Tool and Robot-Robot Relationship in Dual-Robot Collaboration Systems

[A Plane-Based Hand-Eye Calibration Method for Surgical Robots].

A Hand-Eye Calibration Method for Computer Assisted Endoscopy.

Precise hand-eye calibration method based on spatial distance and epipolar constraints

Epidemiological and clinical features associated with colonisation/infection by Acinetobacter baumannii with phenotypic heterogeneous resistance to carbapenems.

An Improved Robust Hand-Eye Calibration for Endoscopy Navigation System

Robot Hand-Eye Calibration using Structure-from-Motion

Hand-Eye Camera Calibration with an Optical Tracking System

Autonomous Robot Calibration for Hand-Eye Coordination

Gaze gesture based human robot interaction for laparoscopic surgery

Multi-Camera Hand-Eye Calibration for Human-Robot Collaboration in Industrial Robotic Workcells

Endoscope FOV Autonomous Tracking Method for Robot-Assisted Surgery Considering Pose Control, Hand–Eye Coordination, and Image Definition

Accuracy evaluation of hand-eye calibration techniques for vision-guided robots