Abstract:Multiphase CrMnFeCoNi high-entropy alloys (HEAs) were prepared by a powder metallurgy process combining mechanical alloying (MA) and vacuum hot-pressing sintering (HPS). The single-phase face-centered cubic (FCC) HEA powder prepared by MA was sintered into a bulk HEA specimen containing FCC phase matrix along with precipitated M23C6 phase and nanoscale σ phase particles. When the sintering temperature was 1223 K, the ultimate strength reaches 1300 ± 11.6 MPa, and the elongation exceeds 4% ± 0.6%. Microstructural characterization reveals that the formation of nanoscale particles and deformation twins play critical roles in improving the strain hardening (SH) ability. Prolonging the MA time promoted the formation of the precipitated phase and enhanced the SH ability by increasing the number of precipitated particles. The SH capacity increases significantly with increasing sintering temperature, which is attributed to a significant enhancement in the twinning capacity due to grain growth and the reduced number of σ phase particles. Through systematic studies, the planar glide of dislocations was found to be the main mode of deformation, while deformation twinning appeared as an auxiliary deformation mode when the twinning stress was reached. Although the formation of precipitates leads to grain boundary and precipitation strengthening effects, crack initiation is more prominent owing to increased grain boundary brittleness around the precipitated M23C6 phase. The prominence of crack initiation is a contradiction that must be reconciled with regard to precipitation strengthening. This work serves as a useful reference for the preparation of high-strength HEA parts by powder metallurgy.

Different-Shaped Ultrafine MoNbTaW HEA Powders Prepared via Mechanical Alloying

Investigation of a Hot-Pressed Nb–Ti–Al Alloy: Mechanical Alloying, Microstructure and Mechanical Property

Synthesis of Ultrafine Fe-W-Al-Ti-Ni-C-B Powders by Mechanical Alloying

Study on mechanical alloying behavior and thermal stability of HfMoNbTaTi refractory high-entropy alloy

A two-phase ultrafine-grained NbMoTaWV refractory high entropy alloy with prominent compressive properties

Microstructure and mechanical properties of ultra-hard spherical refractory high-entropy alloy powders fabricated by plasma spheroidization

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

Alloying behavior and characterization of (CoCrFeNiMn)90M10 (M=Al, Hf) high-entropy materials fabricated by mechanical alloying

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

Nanostructured Al–Ti–Fe–Mn–Ni High-Entropy Alloy by Mechanical Alloying: Synthesis and Characterization

A high-density non-equiatomic WTaMoNbV high-entropy alloy: Alloying behavior, microstructure and mechanical properties

Effect of Tungsten on Microstructure and Mechanical Properties of Novel NiMnCrMoWx High-Entropy Alloys Developed by Mechanical Alloying

Influence of Tungsten Content on Microstructural Evolution of Cobalt-Containing High-Entropy Alloy via Mechanical Alloying

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Microstructure, mechanical and tribological properties of CoCrFeNi high-entropy alloy fabricated by different preparing processes

Preparation and Microstructure of Multi-Component High Entropy Alloy Powders Fabricated by Gas Atomization Method

Preparation of Bulk TiZrNbMoV and NbTiAlTaV High-Entropy Alloys by Powder Sintering