Abstract:Nanoparticles of Co 0.5 Cd 0.5 Fe 2 O 4 have been fabricated using a typical sol–gel combustion technique. X-ray diffraction (XRD), field emotion-scanning electron microscopy (FE-SEM), energy dispersive spectroscopy, Raman spectroscopy and vibrating sample magnetometer measurements were used to study the structure, morphology and magnetic characteristics of ferrite nanoparticles at varied calcination temperatures. The electrical characteristics of the structure are calculated from the first principles using the GGA approach in density functional theory. The X-ray analysis of calcined samples revealed the formation of the spinel fcc crystalline phase was unaffected by the increment in calcination temperature. Due to the presence of cubic cadmium oxide (CdO), several low-diffraction peaks with the symbol * are present. As calcination temperature rises, the average crystal size increases from 20.34 to 21.94 nm. The FE-SEM images indicated a porosity structure and agglomerations caused by the interaction of uniform magnetic nanoparticles. The compositional analysis of the Co 0.5 Cd 0.5 Fe 2 O 4 sample reveals the existence of desired constituents and the elimination of all undesirable precursors. Raman spectroscopy proved spinel ferrite nanoparticles include tetrahedral (A) sites and octahedral (B) sites. The magnetic hysteresis curves demonstrate the ferromagnetic nature, and it was observed that calcination temperatures significantly impacted the magnetic characteristics. As calcination temperature increased, saturation and remanence magnetization decreased, and inter-sub-lattice (A–B) super-exchange interactions were slightly more pronounced in smaller particles than in larger ones. Coercivity increases as calcination temperature rises. This can be attributed to the increase in particle size within the singular domain region. In addition, theoretical results (band structures) indicate that cobalt-cadmium ferrite possesses half-metallic properties.

Temperature dependence of Magnetic properties in Nanocrystalline copper ferrite thin films

The High Field Magnetization in the RF Sputter Deposited Copper Ferrite Thin Films

Reduction of Crystallization Temperature of the Nd–Fe–B Thin Films by Cu Addition

Mechanical and Magnetic Properties of Copper Dispersed Ferrum Films under Heat Treatment

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Magnetic Properties of Nanocrystalline Fe3O4 Films

Transmission Electron Microscopy Studies on RF Sputtered Copper Ferrite Thin Films

Effect of annealing temperature on morphology and magnetic properties of cobalt ferrite nanofibers

Broadening of magnetocaloric effect at elevated temperatures in nanocrystalline ZnFe2O4 thin films

Investigations on temperature-dependent magnetic properties and magnetic thermal stability of magnesium ferrite (MgFe 2 O 4 ) nanoparticles

Structural, Dielectric and Magnetic Studies of Cobalt Ferrite Nanoparticles for Selected Annealing Temperatures

Studying the Crucial Physical Characteristics Related to Surface Roughness and Magnetic Domain Structure in CoFeSm Thin Films

Magnetic Irreversibility and Relaxation in CuFe2O4 Nanoparticles

Magnetic Properties of Nanostructured Cufe2o4

Influence of High-Temperature Annealing on Structural and Magnetic Properties of Crystalline Cobalt Ferrite Nanoparticles in the Single-Domain Regime

Effect of Annealing Temperature on the Properties of MnZn Ferrite Thin Films

Effect of hydrothermal annealing on structure and magnetic properties of RF sputtered Mn-Zn Ferrite thin films

FeCuNbSiB thin films with sub-Oersted coercivity

Temperature-dependence structural, morphological and magnetic properties of cobalt-cadmium ferrite nanoparticles: supported by theoretical study

Electromagnetic properties of nanocrystalline Al3+ substituted MgCuMn ferrites synthesized by microwave hydrothermal method