Abstract:Aramid fiber (AF)/epoxy composites are often used as mechanical and insulating materials for ultra-high voltage (UHV) gas-insulated switchgear (GIS) insulation pull rods. However, the product performance is believed to be restricted by the poor adhesion between AF and the resin matrix, affecting the operation reliability of GIS. In this work, a cascade process was applied to modify the AF surface to improve interfacial behavior. The AF was first treated with air dielectric barrier discharge (DBD) at atmospheric pressure to obtain a rough surface and then reacted with toluene-2,4-diisocyanate (TDI) to introduce polar functional groups onto the surface. The plasma discharge power and treatment time were investigated as major parameters, and the aging effect was studied. The modified AF was characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometer (FTIR), x-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and filament yarn tensile test. The interfacial behavior of the AF/epoxy composite was analyzed by interfacial shear strength (IFSS) test of micro-bond specimen and interlaminar shear strength (ILSS) test of Naval Ordnance Laboratory (NOL) rings. Experimental results showed that polar functional groups were introduced onto the AF surface. The IFSS and ILSS of AF/epoxy composite were increased by 32.8% and 20.2% at most, respectively, and the tensile strength of the AF was mostly preserved. Moreover, with the increase in plasma discharge power, the interfacial strength of the modified AF/epoxy interface increased firstly and then decreased. The AF modified by TDI retained a relatively good modification effect after aging for some time. This study presents a cascade process for the AF surface modification with simplicity, effectiveness, and resource-saving, which is suitable for industrial applications.

Enhanced Insulation Strength of Meta-Aramid Paper by Co-Modification of Chopped Fiber With Plasma Discharge and Coupling Agent

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Interface Engineering via Non-Thermal Atmospheric Plasma for Highly Tensile Insulating Epoxy-Impregnated Aramid Composite Paper

Enhanced Aramid/Al2O3 interfacial properties by PDDA modification for the preparation of composite insulating paper

Enhancing CFRP Laminates with Plasma Jet Arrays: A Study of Interlaminar Mechanical Properties

Nano-Modified Meta-Aramid Insulation Paper with Advanced Thermal, Mechanical, and Electrical Properties

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Improved dielectric and mechanical properties of aramid fiber reinforced epoxy resin composites by polyethyleneimine grafting

High‐strength, electrically insulated industrial meta‐aramid paper reinforced with polyethylene terephthalate microfibre pulp in a sandwich structure

Effects of Air Plasma Modification on Aramid Fiber Surface and Its Composite Interface and Mechanical Properties

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Improvement of the Mechanical Properties by Surface Modification of ZnCl2 and Polydopamine in Aramid Fiber Composites

Introducing deep trap states for high dielectric strength of aramid‐based composite films

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Surface Ammonification Of The Mutual-Irradiated Aramid Fibers In 1,4-Dichlorobutane For Improving Interfacial Properties With Epoxy Resin

Surface Modification of Aramid Fiber by Cascade Process with Atmospheric Plasma and TDI Grafting

Impact of defect structures on interfacial and insulation properties in epoxy-impregnated aramid paper

Surface modification of polyimide fibers for high-performance composite by using oxygen plasma and silane coupling agent treatment

Efficient Hydrophobic Modification of Old Newspaper and Its Application in Paper Fiber Reinforced Composites