Abstract:Electrochromic devices are applied extensively to camouflages, smart windows, heat insulation layers, and automobile rearview mirrors, etc. The amorphous WO 3 is a very attractive electrochromic material, whereas it suffers from degradation of optical modulation and reversibility on ion exchange owing to those deep trapped ions with irreversible reaction behavior. Herein, we designed and, by using magnetron sputtering, prepared a composite film with TiO 2 /WO 3 /TiO 2 double heterojunctions, which is capable of eliminating the deep trapped ions by itself under ultraviolet light (UV) assistance. The electrochromic device based on this composite film, after being recovery by short-time UV irradiation, can maintain a high transmission modulation of 94.72% after 7000 cycles of the voltammetry measurement. This feature allows the device to maintain its initial electrochromic performance after prolonged use. Moreover, the double heterojunction structure can reduce colouring time and enormously improve the colouration efficiency (CE) of electrochromic devices. Experimental research shows that when the thickness of the bottom and upper TiO 2 layer of the WO 3 film was 145.5 nm and 97.0 nm, respectively, the CE of electrochromic devices reached a perfectly high value (479.3 cm 2 /C), being much higher than that of WO 3 devices (69.5 cm 2 /C). Functions of the TiO 2 /WO 3 /TiO 2 double heterojunction in electrochromic device were investigated by combining theoretical analysis and experiment validation, and these results provide a general framework for developing and designing superior electrochromic materials and devices.

Machine learning-guided investigation for a high-performance electrochromic device based on ammonium metatungstate-iron( ii ) chloride-heavy water electrochromic liquid

A study of Electrochromic thin films and Devices by Photothermal Deflection Technique

A Four–layer Solid–state Electrochromic Device

Investigation of an Electrochromic Device Based on Ammonium Metatungstate-Iron (II) Chloride Electrochromic Liquid

Study of proton-based long-cycle-life all-solid-state electrochromic device

Quasi–symmetric Electrochromic Device with two kinds of Amorphous Tungsten Oxide Films

Machine Learning-Guided Performance Evaluation of an All-Liquid Electrochromic Device

High-Performance and Stability Electrochromic Devices with a Water Isotopologue

P‐7.11: Assistance of Iron (II) Chloride and Dimethyl Sulfoxide to Liquid Electrochromic Device Based on Ammonium Metatungstate

Machine Learning-Guided Cycle Life Prediction for Electrochromic Devices Based on Deuterium and Water Mixing Solvent

Advanced Inorganic Nanomaterials for High-Performance Electrochromic Applications

Electro-optical Performance of the Quasi-Solid-state Electrochromic Device with Mg2+electrolyte

Electro-optical performance of the quasi-solid-state electrochromic device with Mg 2+ electrolyte

Electro-optical performance of solid-state electrochromic device based on self-supporting electrolyte

High-performance electrochromic WO3 film driven by controllable crystalline structure and its all-solid-state device

Research progress of MOF electrochromic materials

Electro-optical performance of all solid state electrochromic devices with NaF electrolytes

Electrochromic Materials Based on Ions Insertion and Extraction

Construction of TiO2/WO3/TiO2 double heterojunction films for excellent electrochromic performance

High-performance flexible electrochromic device based on facile semiconductor-to-metal transition realized by WO 3 ·2H 2 O ultrathin nanosheets

A black electrochromic device based on a CuI film for energy-efficient applications